Motorola Atrix 4G :: Creating POP3 And SMTP Accounts
Jun 15, 2011
I created email accounts that use POP3 to receiv and SMTP to send and find I can receive mail but my sent emails get an authentication error. I originally thought they were not being sent at all but then I decided to let them remain in the out folder. After 6 hours they were finally sent. Some take 1 1/2 hours. So it seems that to send email out with a SMTP (roadrunner account) it can take from 1 1/2 hours to 6 hours. The gmail accounts work just fine, but I don't use gmail except for people I am not sure of and do not want their emails in my roadrunner account. Yes, I have my POP3 and SMTP set up correctly. If I didn't I wouldn't be able to send or receive at all. I have removed them and put them back, turned my phone off and let it rest and turned it back on many times.
I have talked to Motorola and the person I talked to yesterday has referred the problem to a tech person further up the ladder. I have read about other problems of this kind on sites on the web when I googled a question about it, but I am not always trusting of the unknown sites. This is a Motorola help site so I am hoping the information here will be more accurate and trustworthy.
FYI, I just read something from a site that said to use gmail as the outgoing smtp. Well, I switched the smtp for one of the roadrunner accounts to use .gmail.com as the smtp. It seems to have the same problem.
View 6 Replies
ADVERTISEMENT
Feb 7, 2011
I have reasonable, but limited, BB exposure over a number of years, but always in a simple email scenario (typically one handset, accessing a single POP3 account).However, for reasons that I will skip over at this point in time for simplicity, we now need to set up a 9300 (on BT, here in the UK) to be able receive from one (POP3) server, but send out via another (SMTP).Unfortunately, however, the BT web interface (BIS ?) only allows one address for "server".
View 1 Replies
View Related
Nov 1, 2012
I have set this up three times now and it works for 2 or 3 days but then loses my SMTP password (smtp.hosts.co.uk).
View 3 Replies
View Related
Nov 7, 2011
My very small company uses Exchange Server 2003 to host our own email. On my laptop, I use Outlook. When I'm out of the office I connect my laptop to the internet and access my exchange mail via an IMAP account. With that connection, I can send mail using the SMTP server. I got my new Atrix 2 and set up that account using the advanced settings that were the closest to the settings I use for the IMAP account in my Outlook setup. I was immediately able to see my inbox and receive email. After one tweak (that I can't remember any more), I was able to sent mail. Then a few hours later, I couldn't. I've tried every possible combination of the Advanced Settings in the Account Setup screens on the phone. Nothing works. I tried a Master Reset and all that accomplished was flushing away the contact list that the salesperson had copied to my new Atrix from my old phone when I bought it. I thought that was backed up to Google and would be restored when I logged back in but apparently not. Any advice on how to get that back? But the main problem is sending mail.
View 9 Replies
View Related
Jun 12, 2011
I created a POP3 account using the "Accounts" app. All is good, it can send & receive emails & they appear in the Blur messaging widgets, which I like.My problem is that I do not want the phone to delete the emails from the server as I get my main PC's Outlook to download & store all the emails when it is switched on.Can it be done? It would be a nice new feature to add if it isn't already in.
View 7 Replies
View Related
Oct 20, 2011
I have a pop-3 mail account with road runner, do you know if the "Counter" works with that? It usually shows a number of how many emails received. Notifications are working however it doesn't show on the email icon, it did on the SGS2,. I tried sending you a PM, but your not in the Directory?
View 13 Replies
View Related
Jul 28, 2011
When creating an event in the calendar I've noticed the default date is totally random. Issumed it would use todays date but noticed the date would jump around depending on whatview you have on the calendar. I know it's just a matter of choosing the correct date but it's
View 1 Replies
View Related
Dec 1, 2011
I have a googlemail email account which I access from either my Blackberry or my PC. Last night I changed my password for my email account on my PC and now cannot access it on my Blackberry. I tried to change my password on my BB but a message keeps coming up "invalid email address or password" I even tried deleting my googlemail account from my BB and then tried to re-create it but I'm still denied access. BB keeps telling me if the problem persists, then I should contact googlemail.com, but I'm not having a problem accessing my account on my PC.
View 1 Replies
View Related
Jul 4, 2012
I'm creating an email account on 4S, iOS 5.1.1 and when it comes to pop-up verifying SSL part (Below) and it require to verify 2x inorder for the email account to be set up.
Cannot Connect Using SSL
Do you want to try setting up the account without SSL?
Does anyone knows why? Need advice urgently, thank you.
Info:
iPhone 4S, iOS 5.1.1
View 9 Replies
View Related
May 8, 2012
I have create many free accounts for apple I have reached the limit of creating free accounts how can I delete that free accounts which I have made?
Info:
iPhone 4, iOS 5.1
View 3 Replies
View Related
Mar 5, 2014
Intermittent error msg and failure to sync on set schedule. Sync also seems to take forever.
View 1 Replies
View Related
May 2, 2012
Where can I find Accounts and sync settings in my Atrix 2? I remember I saw that sometime back but can't find it now. Just to clarify, its different than under Settings --> Account.
View 4 Replies
View Related
Aug 25, 2012
I was on the driving range today when a storm blew in. I usually have my phone in my pocket with the screen towards my leg. I keep it in an otter box commuter case. Well it was screen out and I got water in the screen. I am looking for a way to sync all contacts and calendar entries from all accounts (corporate sync, yahoo, etc...). I will want to put this on the new phone I get next week through my insurance.
The phone is not damaged in any other way. Just the screen is getting condensation and it is growing to a larger area of the screen. I figure I have paid more than enough insurance premiums to get a replacement phone.
PS This is the first time I really miss having a blackberry. You just plug in your phone, open desktop manager, and click prepare to transfer to new phone. It backs everything up don't to text messages.
View 7 Replies
View Related
Oct 19, 2011
Can anyone tell me how to bundle my multiple eamil accounts on my new Atrix 2? Or is it already doing it and I just dont know?
View 13 Replies
View Related
Jul 3, 2011
Last night both my Twitter & Myspace accounts that are linked to my Motoblur account stopped working. I would constantly get an account error icon in my notification bar. I changed to passwords on both accounts, I made sure email and passwords were correct a million times lol
Nothing worked with Twitter or Myspace..SO I removed both accounts from my Motoblur account, re-added my Twitter account (which is now working fine) BUT my MySpace account is still not working.
I have removed it, changed the password, then tried to re-add it just like my Twitter account problem. It still won't work! IDK what is wrong, I have even tried without WIFI on
I get this error message from MotoBlur Account Management Screen when trying to add my MySpace account "Your entry is invalid, please try again"
Now I know this is false, can someone else tell me either how to fix this or is this a problem right now with MySpace?
View 15 Replies
View Related
Nov 9, 2011
I have multiple emails. However, when I am in the email app, I cannot find an easy way to switch between accounts other than settings and changing the default account. Am I missing something, or was this phone really setup with only 1 email in mind?
View 5 Replies
View Related
Apr 28, 2011
can't get the Data push feature to work on my two GoDaddy IMAP email accounts. When I first turn on Data push, it appears not to change mode, and no test messages get transmitted until I force it to fetch. After power cycling, the accounts no longer receive any mail at all. The green "throbber" circle, at the upper left, next to the account name, never stops spinning, and no mail ever shows up. I do not receive any more mail until I turn of Data push and reboot the phone. K9 works perfectly, on the same two accounts, and receives new messages immediately. I would really like to use the native client so that I can take advantage of the Motoblur messaging widget, but timely arrival of mail messages takes precedence for me.
View 1 Replies
View Related
Aug 17, 2011
Brand new Atrix owner here, new to Android. Every time I try to open the default Email app (2nd from the left on the dock), I can only see the "Set up existing accounts" screen where I can add stuff like myspace and facebook accounts. I am linked to a gmail and twitter account, but I can't figure out how to get to my gmail from here. (I can get to it fine from the gmail app.)
Is something wrong, or is this just an accounts set up app and not an email app at all?
View 5 Replies
View Related
Jun 11, 2012
I have set up a gmail account and two eclipse accounts seperately, but I cannot setup my main eclipse acount.the incoming settings are accepted but my smtp setting are not accepted, my ISP confirms all the settings are correct and I have been using them for years, they also work on my android phones.
View 1 Replies
View Related
Mar 4, 2012
I've happily purchased a Motorola RAZR XT910 and have setup my POP email account, which sends and receives happily when on 3G (connected to optus).
At work and home I have wireless access which allows me to browse and to receive emails. But I have errors when trying to send when connected wirelessly.
Problem is when trying to send emails when connected via wireless. Quite correctly it has smtp errors as the smtp setting is for the 3g carrier (mail.optusnet.com.au). So question is "How do you configure the Motorola RAZR XT910 Droid to allow a secondary SMTP setting when in an allowed and configured wireless zone?"
I should not have to turn off my wireless and should not have to manually change the smtp setting each time I want to send from inside the wireless connection.
I tried setting up a second account with just the smtp being different [URL] but was unable to setup the account as it said the account was already setup. Of course the iPhone does allow multiple SMTP addresses.
View 3 Replies
View Related
Mar 4, 2012
I've happily purchased a Motorola RAZR XT910 and have setup my POP email account, which sends and receives happily when on 3G (connected to optus)At work and home I have wireless access which allows me to browse and to receive emails. But I have errors when trying to send when connected wirelessly.Problem is when trying to send emails when connected via wireless. Quite correctly it has smtp errors as the smtp setting is for the 3g carrier (mail.optusnet.com.au). So question is "How do you configure the Motorola RAZR XT910 Droid to allow a secondary SMTP setting when in an allowed and configured wireless zone?"I should not have to turn off my wireless and should not have to manually change the smtp setting each time I want to send from inside the wireless connection.I tried setting up a second account with just the smtp being different (eg. mail.carrier.com.au) but was unable to setup the account as it said the account was already setup.
View 11 Replies
View Related
Oct 13, 2011
I have found 2 applications so far, both from the App Store, one is called "GateGuru" and the other a company app called IFS Account ManagerWhen I install these applications and then go to accounts, then add account I see them listed under "Other accounts". Clicking on them, long or short does nothing and I can't configure them I have done a full factory reset of the phone with no change and these apps do work on HTC and Samsung phones
View 2 Replies
View Related
Jun 28, 2011
Made the move from the Original Droid to the X2 yesterday. So far, it is a much improved device. Can't figure out how to get my gmail to show in the universal inbox.
View 1 Replies
View Related
Dec 28, 2011
So, is there any way to create your own playlist?
View 2 Replies
View Related
Jun 13, 2012
Have you noticed that sometimes when you log into [URL] and try to create a customized workout that you are given different options? Sometimes I'm allowed to create and label an interval segment as a "warmup" and sometimes I can't. Sometimes I can create a single interval segment and sometimes I can only create interval segments in "sets". I'm wondering if Motorola is making updates to the site based on this new functionality? Also, I would like to request to be able to repeat more than 2 intervals at a time. I have many cardio clients that I will have them perform a set of 3-5 different intervals and then repeat. I don't believe I can create a workout on [URL] that will allow me to do that, can I?
View 3 Replies
View Related
Sep 27, 2011
My cliq was a 2.0. something and i wanted to upgrade to the 2.1 (Eclair). But you can't upgrade to the 2.1 from the 2.0. So i downgraded to the 1.5 and now when i turn on the phone and it says create new account or use existing account. I choose existing and when i type in my motoblur id and password it keeps saying error creating account.
View 15 Replies
View Related
Aug 18, 2011
I'm using the stock email client on a Droid3 and a DroidX with a Verizon POP3 email account. If an Office 2007 file is sent as an attachment (.docx, .xslx, .pptx) it shows up a "unsupported file type" and cannot be downloaded or saved. I have both QuickOffice and DocumentsToGo installed and the files open fine with those apps and are recognized attachments I use the K9 email client with the same Verizon POP3 email account.Is there any way to get the stock email client to recognize that .docx, etc are valid file attachments and allow them to be downloaded and viewed
View 12 Replies
View Related
Jun 18, 2012
I currently have a Motorola Admiral synced with our work's Microsoft Exchange server. In our Outlook email account we have certain emails redirected into subfolders in our incoming email. For example we have an inbox and under the inbox is a subfolder where all 'delivery ticket' emails are redirected into. On the Admirals there is an icon alert and also an audio alert every time there is an incoming message in our email account. However the only time we get the subfolder emails is by going into the email folder, clicking on the inbox then the subfolder and letting it refresh that way. I looked through EVERYWHERE trying to see if I could set it to automatically refresh. Also is there a reason I don't get any type of alert when an emails comes into that subfolder? I even tried adding a shortcut directly onto one of the main screens only for this subfolder but I can't do it. I can only add a shortcut for the main inbox.
View 3 Replies
View Related
Jan 18, 2012
I have searched other forums but have not found a fix. While configuring my Exchange signature block on my Razr it all looks great but the recipient sees phone numbers and address as hyperlinks, instead of just email address as a link. The phone and address links obviously go no where once clicked.
View 2 Replies
View Related
Sep 19, 2012
id like to buy one of those over 3000mah batteries for my atrix 2 , but where i live i can only find this batteries for the atrix 4g and im not sure if it works on the atrix 2.
View 7 Replies
View Related
Jun 19, 2010
I want to use an SMTP server which is not provided by the operator (network or broadband). The only form of authentication catered for seems to be "POP before SMTP" where you have to authorise sending using the same login as you first receive with.
Settings I see are:
Incoming : there is no field for remote mailbox address - weird?
Outgoing: there IS a field for remote mailbox address - why? The username and password fields provided seem to relate to this remote mailbox address, not to the SMTP server. (Anyway, they already exist in incoming settings)
E.g. I can receive from my remote mailbox fine. That's "me@tiscali.co.uk" I can't authenticate using the "smtp.o2.co.uk" server to send using my address of "me@tiscali.co.uk" as there is nowhere to enter my o2 authentication details. (I can send unauthorised to o2 addresses)
The above example works fine in Profimail email client and with Profimail I can send emails carrying the "me@tiscali.co.uk" address with o2 authentication via the o2 SMTP server by either t-mobile network or by tiscali broadband WLAN to any of various test addresses.
View 4 Replies
View Related
