Motorola Droid Razr :: How To Add SMTP Wireless Setting
Mar 4, 2012
I've happily purchased a Motorola RAZR XT910 and have setup my POP email account, which sends and receives happily when on 3G (connected to optus)At work and home I have wireless access which allows me to browse and to receive emails. But I have errors when trying to send when connected wirelessly.Problem is when trying to send emails when connected via wireless. Quite correctly it has smtp errors as the smtp setting is for the 3g carrier (mail.optusnet.com.au). So question is "How do you configure the Motorola RAZR XT910 Droid to allow a secondary SMTP setting when in an allowed and configured wireless zone?"I should not have to turn off my wireless and should not have to manually change the smtp setting each time I want to send from inside the wireless connection.I tried setting up a second account with just the smtp being different (eg. mail.carrier.com.au) but was unable to setup the account as it said the account was already setup.
View 11 Replies
ADVERTISEMENT
Mar 4, 2012
I've happily purchased a Motorola RAZR XT910 and have setup my POP email account, which sends and receives happily when on 3G (connected to optus).
At work and home I have wireless access which allows me to browse and to receive emails. But I have errors when trying to send when connected wirelessly.
Problem is when trying to send emails when connected via wireless. Quite correctly it has smtp errors as the smtp setting is for the 3g carrier (mail.optusnet.com.au). So question is "How do you configure the Motorola RAZR XT910 Droid to allow a secondary SMTP setting when in an allowed and configured wireless zone?"
I should not have to turn off my wireless and should not have to manually change the smtp setting each time I want to send from inside the wireless connection.
I tried setting up a second account with just the smtp being different [URL] but was unable to setup the account as it said the account was already setup. Of course the iPhone does allow multiple SMTP addresses.
View 3 Replies
View Related
Jun 11, 2012
I have set up a gmail account and two eclipse accounts seperately, but I cannot setup my main eclipse acount.the incoming settings are accepted but my smtp setting are not accepted, my ISP confirms all the settings are correct and I have been using them for years, they also work on my android phones.
View 1 Replies
View Related
Sep 7, 2012
I noticed on my Razr that when I receive a new email I see the LED flash Green. When I get a Facebook or Gmail notice the LED flashes Blue. I have looked on the phone to try and see these settings for the LED color and cannot find a setting.
Is there somewhere to view/change this setting or is this just standard with the phone ?
View 2 Replies
View Related
Jan 31, 2013
I"m looking for the settings for the wired headset. There was a screen that allowed you to set sound effects and I believe equalizer settings. Was this screen eliminated? I can't seem to find it.
View 3 Replies
View Related
Feb 12, 2012
There is a setting to enable the RAZR to automatically keep its time correct by syncing with a time server somewhere on the internet. When I checked the time on my RAZR against my PC, where I have a service that sets the time from an atomic clock, I found that the RAZR was off by more than 14 seconds. I disabled the option and instead installed an app called "ClockSync" that sets the correct time. Unfortunately, the automatic time update setting is required by Verizon in order to login to My Verizon Mobile, so I either give up checking my data and call usage or I give up accurate time. This is very annoying. Can we get Verizon to use a reliable time server instead of whatever they are using now?
View 4 Replies
View Related
Nov 19, 2012
I find that if I set the camera to HDR it stays there as long as I just open and close the camera. If I switch to video and back or switch from rear to front camera it no longer has the HDR setting I have to change it again. Same issue if I reboot. The setting does not want to stay on HDR.
View 4 Replies
View Related
Mar 27, 2012
On my Droid RAZR, Motocast wireless displays album titles without discography (i.e. without the cover picture). Small, but annoying.
View 11 Replies
View Related
Dec 28, 2012
How do I set my phone to use use my external SD card, 32 gig, for as much as possible so that I can try to use only what is mandatory on my internal storage? I have my camera set to use my external SD card I'm not sure how to set apps, downloads, music etc to use external. I'm assuming there is a recommendation that those of you who know more about using this phone than I that I should use?
View 2 Replies
View Related
Nov 29, 2011
I have an app called classic ringtones that i use, but for some reason the razr will not hold the setting and reverts back to a stock tone after an undertermined amount of time....I set the tone, it works for a while and then; just like that its gone!
View 9 Replies
View Related
Mar 15, 2012
I've notice what I'd consider a security issue. I have my phone set up to require a PIN after 20 minutes of non-use. This works fine EXCEPT for when I use the sleep mode (Power button-Sleep). If I let it sleep over-night then wake it up, it does NOT require the PIN number. So that means that if the phone were taken and I'd put it to sleep, then phone's vulnerable
View 7 Replies
View Related
Feb 15, 2012
How can i set multiple wireless setting on my MOTOACTV? Currently i have 1 setting and is working fine? How can set additional wireless setting for diff location?
View 1 Replies
View Related
Oct 19, 2012
If both Verizon phone and data service are discontinued, will a Droid Razr still function (especially, will internet access via Wi-Fi still function)?
View 6 Replies
View Related
Oct 12, 2012
Recently i moved to Saudi for a project related work and I am staying in an apartment where they provide the wifi. first 2 days I was able to connect to the wifi and internet was working fine. After that my phone will detect the wifi in my room and it will connect to the wifi, but no internet access. And the same time it is working fine with the wifi in my office. So i did the Factory data reset, but still its not working. My friends are using different android phones and they are able to access the internet, even I can use my laptop to connect to the wifi.
View 1 Replies
View Related
Apr 8, 2012
I purchased the Moto Elite Sliver because my Plantronics Pro HD would drop its bluetooth every single time a call was answered or placed. I did a little research and found it may be related to a conflict with the 2.0 headset and 4.0 phone. Moto Sliver is BT 3.0 and was working great until this week. Now every single time a call is disconnected, the headset disconnects and reconnects. Reboots galore, problem still exists. Uninstall/reinstall Motospeak, problem still exists. Sometimes the bluetooth will not connect at all (reboot required). The Droid RAZR Maxx and the Elite Sliver are supposed to be state of the art MOTOROLA, I make a living with my phone and headset.
View 4 Replies
View Related
Oct 25, 2012
I have WiFi enabled. Often when I am near a wireless access point, my RAZR M still uses 4G. It's as if the WiFi is going to sleep when I power the screen off, but it doesn't wake up again. Turning WiFi off and on makes it reconnect.It seems to happen mostly when I'm at home, where I also use the Motorola flip stand with "ESP" smart charger, and a NetGear dual-band wireless router/access point.
View 7 Replies
View Related
Nov 17, 2011
Brand new Car Dock and Razr. Installed and all good working no problems for first 2 days,then when I dock the RAZR it does not change to the car navigation screen or start to charge.Power light on the power cable. RAZR charges and transfers data via other cables.
View 15 Replies
View Related
Dec 16, 2011
The Verizon Sales assistant assured me that I'd be able to Sync my Outlook with my Droid Razr as easily as I synced it with my old Blackberry Tour. Now, after several days' worth of set-up, google searches, forum searches and FAQ's, I'm come to the conclusion that Motorola did NOT build this function into the Droid Razr, and I have to pay a hefty fee for a decent 3rd-party app to do what my Blackberry did for free. Have I missed something?
View 1 Replies
View Related
Oct 18, 2012
I frequently hit adjacent keys while texting on my old Droid X. A larger screen and of course 4G and a faster processor were appealing as well. As the Razr HD models sport screens almost as large as the S3 I ran to see them on their first day out of the gates. What a disappointment! Holding my old Droid X up against them I saw that the usable screen sizes were identical. Namely 4.3" unless playing videos in which case the video filled up the Razr HD's 4.7" screen. I couldn't find anything else that would fill up the screen. Perhaps, photos might. But internet browsing, texting and whatever else I tried occupied a 4.3" inset within the 4.7" screen. So why have a 4.7" screen at all? The Galaxy S3 on the other hand fills up the entire 4.8" screen with not only video but everything else, including texting, messaging, web browsing, and everything else I tried. So what gives? Why did you even create a 4.7" screen if you aren't going to utilize it to its full potential?
View 6 Replies
View Related
Jul 2, 2012
I thought ICS was suppose to extend battery life? My MAXX wont last very long lately since the ICS, And its suppose to have a very long battery life, what happened?
View 3 Replies
View Related
Sep 9, 2011
Perplexing problem I am having. My co-worker can get our hidden wireless signal in our room but I can't. I can see an open AP but can't see the one I want. It is WPA encrypted with the SSID xmit turned off. That shouldnt make any difference, especially since the other guy added the AP to his Droid with no issues at all. Is there a wireless card test to see if my wireless is working fine? I should also mention that I have to manually create the AP in my wireless list. When I am in the direct vicinity of this AP, it shows up in the list as WPA protected - Not in Range.
I have downloaded the WiFi Analyzer app and it does not show the AP I created, but does show an open one in the area...ot sure what is going on here. I can connect to my WPA wireless at home...Update: I just checked to see if my home wireless network will connect to the Droid yet and it does not. The 2 similarities between work and home are that both are B&G wireless units with both xmitting both B & G signals. I am able to pick up the wireless from the city water tower which is encrypted so I am not sure what exactly is going on. DOes anyone know if version 2.2 of android doesnt like a B/G router with both signals on?
View 5 Replies
View Related
Dec 4, 2012
On Oct 20, we switched from AT&T to Verizon Wireless after being with AT&T for over 10 years. We had iPhones and had to get new phones when we switched. The Verizon salesperson convinced me and my adult daughter to get the RAZR HD that had just come out and he said it was better than the iPhone. My husband stayed with an iPhone because he is a commercial pilot and needed to use aviation apps that were not available on a DROID phone. Initially we were very impressed with the RAZR HD until my daughter had a problem with hers after just 20 days of use. She is an EMT and was on duty sitting in her ambulance. She has to have a phone on her while working. She used her phone several times and had it in her front pocket. She took the phone out of her pocket to call us and the screen was black and not functioning—a few minutes before it was working fine. She noticed some spider cracks in the LCD at the edge of the screen. She took the phone back to the store where it was purchased and the Verizon salesperson accused her of abusing/dropping it and said she would have to file an insurance claim which would cost $99. I was shocked. Our iPhones had heavy mobile use and were even dropped several times, including on cement, but never failed. I told our daughter we had no intention of filing an insurance claim for a defective product that should be covered under warranty. For all we know, it had damage before we even bought it from Verizon. But when she contacted Motorola, they said a screen failure due to a cracked screen was not covered but she could send it in to be evaluated. When we read the warranty, it does not say this. It says it doesn't cover damage caused by accidents, abuse, misuse, including improper usage or operation, abuse or neglect, or impact damage, such as dropping the phone. The phone had not been dropped, abused, or misused. There is not a scratch or any physical damage on the phone and the glass. The phone failed under normal use. The LCD screen under the glass fractured. Normal use should not cause this unless there was a manufacturer's defect in the phone. I.contacted my dad who works with digital and analog wireless technologies/hardware, and he told us to file a warranty claim. He said the phone has an accelerometer in it that detects G-force and impact and Motorola should provide us the data that shows the phone was impacted outside the tolerance thresholds for normal use. Well clearly Motorola and Verizon are just scamming customers and ripping them off. How convenient for Motorola to automatically tell a client all screen failures are due to customer damage. We should have stuck with iPhones and the AppleCare. Apple stands behind the quality of their products and would have never questioned replacing a phone for a defective LCD, i.e., no broken glass, just screen failure. You get a replacement on the spot. Oh but not Motorola—mail it in and then you are without a phone for how long??? We are going on 24 days now. Motorola got the phone and sent a picture of the phone screen (included) and said it was physically damaged—said it would cost $99 to fix—interesting how that is the same amount as the Verizon insurance deductible. Really--they are insulting my intelligence... I called them up and told them to provide me the accelerometer data—I wanted proof the phone was damaged by us and not defective. They still have the phone and have not responded to my request for over a week now. I told customer service that Motorola should be ready for a fight—we will file a report with the FTC and the BBB if they don't repair or replace the phone at no cost. I am very angry about this poor customer service. If we dropped the phone and cracked it up, well that is what insurance is for and that is why we bought the insurance. I would not expect Motorola to fix a phone for free if we broke it, but this is not the case and it is just outrageous. I am worried the same thing will soon happen to my RAZR HD which has overheated while it was charging. The phone is so thin that any expansion in the case is going to put pressure on the LCD. I am wondering how we are going to make it through a 2-year contract with Verizon when the Motorola phone can't even handle normal mobile use. I used my AT&T iPhone 3Gs for over 3 years before switching to Verizon and the RAZR HD and the iPhone still works well as a Smart device for email, photos and music. Clearly Apple has a superior product and also knows how to take care of customers. We called Motorola customer service again today since we aren't seeing any information online regarding the current status of our phone, and they couldn't even tell us what the status is. They have had the phone for over 2 weeks. If Motorola doesn't do what is right, they will lose us as customers. This is so frustrating.
View 7 Replies
View Related
Jul 10, 2012
I was facing problems similar to this ( Gallery crash after OTA ICS update )url..I followed the thread and did a factory reset.I now find that the problem is solved but the UI after factory reset is different from the original UI that came with ICS update. I kinda like previous UI. I am guessing it is Motoblur. Is there any way to get that back.
View 13 Replies
View Related
Aug 1, 2011
I'm thinking about getting the wireless charger with the D3 but customer service couldn't answer my questions.
Will it work with the extended battery? Does this have a cable on the door that uses the usb port for charging as I've seen some of the add-on solutions?
View 4 Replies
View Related
Sep 4, 2011
The back replaces the (extended) battery cover and it a bit thicker and heavier but not bad at all. It fits well on the phone, no issues and the back of the phone remains flat (no uneven raised portions on the cover). The cover connects to the four charing pins on the back of the phone (under the cover) so you don't need any cables that use the usb port as on some of the third party wireless phone chargers.Setup was as simple as changing the back of the phone, powering the charging pad and laying the phone on the pad. I didn't time how long it too to charge but when my phone was down 50% it didn't seem longer than the usb charger. There is an indicator on the pad that lets you know when the phone is not charging (off or not properly placed on the pad), charging or fully charged and an audible that sounds when you place the phone correctly on the pad.
You can feel when the phone is correctly placed as if there's a magnet in the pad and phone back. The bottom of the phone overhands the pad by about 1/2 inch. I was planning to get a picture frame type holder to prop up the pad so the phone can be easily viewed on my desk. With the phone being longer than the pad, it might not work as well as I wanted but I can probably still do it in landscape mode.
View 13 Replies
View Related
Jun 15, 2011
I created email accounts that use POP3 to receiv and SMTP to send and find I can receive mail but my sent emails get an authentication error. I originally thought they were not being sent at all but then I decided to let them remain in the out folder. After 6 hours they were finally sent. Some take 1 1/2 hours. So it seems that to send email out with a SMTP (roadrunner account) it can take from 1 1/2 hours to 6 hours. The gmail accounts work just fine, but I don't use gmail except for people I am not sure of and do not want their emails in my roadrunner account. Yes, I have my POP3 and SMTP set up correctly. If I didn't I wouldn't be able to send or receive at all. I have removed them and put them back, turned my phone off and let it rest and turned it back on many times.
I have talked to Motorola and the person I talked to yesterday has referred the problem to a tech person further up the ladder. I have read about other problems of this kind on sites on the web when I googled a question about it, but I am not always trusting of the unknown sites. This is a Motorola help site so I am hoping the information here will be more accurate and trustworthy.
FYI, I just read something from a site that said to use gmail as the outgoing smtp. Well, I switched the smtp for one of the roadrunner accounts to use .gmail.com as the smtp. It seems to have the same problem.
View 6 Replies
View Related
Aug 18, 2012
There is a wireless printer on my office network that I would like to be able to print saved files from my phone to. How would I do this. Is there an App or ?
View 2 Replies
View Related
Nov 7, 2011
My very small company uses Exchange Server 2003 to host our own email. On my laptop, I use Outlook. When I'm out of the office I connect my laptop to the internet and access my exchange mail via an IMAP account. With that connection, I can send mail using the SMTP server. I got my new Atrix 2 and set up that account using the advanced settings that were the closest to the settings I use for the IMAP account in my Outlook setup. I was immediately able to see my inbox and receive email. After one tweak (that I can't remember any more), I was able to sent mail. Then a few hours later, I couldn't. I've tried every possible combination of the Advanced Settings in the Account Setup screens on the phone. Nothing works. I tried a Master Reset and all that accomplished was flushing away the contact list that the salesperson had copied to my new Atrix from my old phone when I bought it. I thought that was backed up to Google and would be restored when I logged back in but apparently not. Any advice on how to get that back? But the main problem is sending mail.
View 9 Replies
View Related
Jul 3, 2011
My droid pro is connected to my wirelss network. When I first connected it to the network I could see all the other devices and download shared files from the computers to my droid. I could view all the devices on the droid. Now I can't view any of the devices ( computers ) on my droid nor access any of the shared files. I see the droid connected to the router ( IP and Mac addresses ) I go to the file folder and scan for the shared folders and the IP addresses of these computer are visible, however I can not access any the of shared folders as before. I contacted the service provider ( Verizon ). They tried to say it was a computer issue rather than a cell phone issue. All shared files are marked and set up to be shared to anyone who has access to the wireless network. The computers were check by a computer engineer and fould not to be the problem. I have tried so many areas to resolve this issue as has the computer engineer who checked the computers.
View 1 Replies
View Related
May 10, 2011
Like many of the other users on this forum, I have wireless problems with my Droid 2. I would like to try to change some of the Advanced settings under Wi-Fi Settings, such as Peer to peer channel, but when I do the settings app force closes. I have never been successful in making a change here.
View 1 Replies
View Related
Oct 1, 2011
While connected to my wireless for data, voice signal strength hovers at 1 bar. I can't find the signal strngth meter in settings to double check this as I write... when I am connected to 3g I typically see 3-4 bars...
View 3 Replies
View Related
