I recently flashed xef 5.1.1 and ota'd to 6.0.1 and rooted with spacex kernel. My question is can i install twrp with flashify?
First of all root with spacex kernel.... Then follow the guide on how to root galaxy s6 android 6 in this forum and don't do the last part with installing the kernal and super su. Link to guide: [URL] ....
I'm new to the Samsung S6. Just brought a second hand S6 edge from eBay, and how to flash twrp recovery to the phone. It's been a while since I flashed a Samsung phone unsure on the process on how do it. I'm not really worried about tripping know....
View 1 Replies View RelatedI flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
Just got my SM-920F
First I tried to flash CF-Autoroot with odin v3.10.6 - after odin passed, the phone rebooted and got stuck on "powered by android" screen
I got the stock firmware (G920FXXU1AOBN) downloaded and flashed with odin.. the phone comes to life...
I try to flash twrp. ... same story
What can be the cause of this ? Can't root or get custom recovery
Should I do the OTA update maybe and try ?
Like the title says I have a t-mobile s6 running AOCG rooted with ping pong can I use flashify to flash a recovery now instead of Odin?
View 8 Replies View RelatedI was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not: Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there.
Im using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View RelatedI used adb to install TWRP onto my Nexus 5. Now it is in a bootloop, and TWRP does not seem to be able to mount anything. When it reboots it looks like it automatically goes to the TWRP where it says it is running OpenRecoveryScript but it is unable to mount anything. I tried a boot start to Recovery and it worked but when i tried a factory reset it says the same thing.
View 1 Replies View RelatedAfter manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 Replies View RelatedFastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View RelatedDo I need to backup data in order to be able to revert back to my stock Rom? My understanding is that if I did a backup of the System, Boot, EFS, and Cache then I should be fine. Only gripe is that my Apps and app data will be lost. Is that correct?
View 1 Replies View RelatedSo, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
View 1 Replies View Relatedi have a problem with battery drain the phone is emty after a half day. im on AOE3 firmware version.i remember reading somewhere the this is because of flashing twrp? and needing to flash stock recovery.My question is is this true? and where can i find the AOE3 stock recovery?
View 4 Replies View RelatedI am currently on 5.1.1 stock with rooted and twrp installed. After flashing 6.0.1 official ROM via Odin will I retain ROOT and TWRP? If not then how can i get rooted and twrp installed?
View 1 Replies View Relatedi tried to install another ROM and made some kind of big mistake
I deleted the whole system what was quiete dumb i think...
(I had stock kernel, then rooted is via CFroot and then installed TWRP and delete the wrong thinks without having made a backup)
I got a little problem with my TWRP.
Galaxy S6, Android 5.0.2
TWRP v2.8.7.1
I noticed it when i tried to install the Camera Mod. I tried flashing the zip, using TWRP.
It said, that the flashing was done succesfully, but nothing happened. I also tried it with anothter zip file, but still no change.
The folders which should have been changed doesn't show a change in the last changed dates etc.
Trying to root my Galaxy s6 SM-G920I India version but no luck. Had to restore stock firmware thrice today. Every time I used ODIN 3.10.6 with Unibase or Unikernal it would say kernel is not SEAndroid enforcing and stick to a bootloop. If I use the CF auto root method it says Recovery is not SEAndroid enforcing and again bootloop.
View 10 Replies View RelatedI tried rooting my Galaxy S5 SM-G900T and after the root process with Odin and TWRP in the last step when I rebooted the phone it got stuck on a boot loop in the Samsung logo, so I had no choice but to do a Factory reset which even the OS got deleted in the process. I'm downloading the 5.1.1 firmware for my phone on my computer but I have questions on how to install it on my phone now, because obviously PC is not recognizing my phone or it is not letting me access the storage or sd card once connected. I have Kies 3 in my pc and TWRP on the phone. Which way can I install the firmware on my phone again?
View 3 Replies View RelatedFor the past 6 hours I've been trying to unbrick my Samsung Galaxy S6 Edge (G925-W8). I accidentally cleared all the files/ caches with TWRP, now I do not have any OS on it.
Things I've done: Used Odin to flash a md5 file or a rom I keep getting an error
I'm so lost, I just got the phone yesterday as well too...
I have not secured my taken pictures to OneDrive / Dropbox, but I thought a single TWRP backup (on a USB OTG) would be enough.
I was using Edgar28's XtreStoLite 2.1, and wanted to put 2.2 on the S6. I knew v2.2 needed a new bootloader and modem to be loaded in ODIN, so I did.
Before I did that, I made the TWRP backup on the usb stick, so if anything would happen I could go back.
Well, as I usually did with my Note 4 when installing a new ROM, I completely wiped everything except for the microSD card and the USB OTG.
But at that point I forgot the S6 doesn't use the microSD so I would probably be lost of all the photo's (yes because I also forgot to set up OneDrive).
Then I realised I had to go back because I forgot about my photo's. So I put back the modem and boatloader for XtreStoLite 2.1 and loaded the TWRP backup in the restore.
I hoped it'd start right up, but it does not. It comes in a bootloop, even before the animated samsung logo.
So then I tried installing XtreStoLite 2.1 without a wipe, and the system started but I couldn't see my photo's, the were gone.
Then I loaded the original firmware via odin over the backup, and I did see the photo's, but they were all grayed out. Like they were there but you wouldn't be able to see them.
What can I do to restore the photo's from the TWRP backup?
I have a G920F. It is rooted via odin flashing Unikernel. When I tried to flash TWRP via TWRP Manager (installed from the playstore), the phone would get into a bootloop. It got stuck at the Galaxy S6 screen, with the red line up on the top left corner saying "Recovery Seandroid not enforcing" or something like that. I had to use KIES to get it back up and running (no data loss). Now I rooted it again, and root was successful. I want to get TWRP flashed in order to install the custom ROMS. How do I do that now? I don't want to have to use KIES to recover my phone again. It is running 5.1.1 btw.
View 4 Replies View RelatedI rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies View RelatedI decided to root and installed a custom recovery on my G920l.
The root went fine and I installed TWRP but once I tried to reboot into the recovery my phone has frozen and doesn't want to turn off.
I don't get what I did wrong and how to fix it or at least how to turn the phone off?
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
I got my phone back and recovered it through a backup from TWRP.
Everything went smooth, besides half my drop-down menu settings are gone.
Attached picture. Missing things like Mobile Data on/off
Attached Thumbnails....
How to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.What confuses and scares me is the warning about the bootloader and modem... Go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
View 5 Replies View Relatedwhere is the flash light on the galaxy s6
View 7 Replies View RelatedI have tried to flash stock firmware a few weeks ago but got the same problem. Now I am trying to flash engineering bootloader exactly the same problem.the problem is; every time I want to flash something with odin it fails after nand write start and then i get this weird thing on my screen.and yes after this fail i can still use my phone and other things.
View 5 Replies View RelatedI have 5.0.2 firmware now, but the main problem is hot spot not working and even I can't use "shareit" app.I want to flash 5.1.1 firmware on my phone.
My phone is factory unlocked (knox warranty void: 1 (0x0000))but after 1 sec the process fails.I cant attach it's photo. I don't know how to attach image in XDA. It has been rooted easily but the twrp recovery touch didn't work and I installed sprint version and problem solved.If I flash the wrong firmware it will not be flashed or flash will complete and the phone won't work?because I didn't know to flash 920v or 920r4. and finally I choosed the 920v my phone build info is: ( I used "root checker" for this information)
BOARD : universal7420
BOOTLOADER : G920R4TYU1AOD3
BRAND : Verizon
CPU_ABI : arm64-v8a
DEVICE :zeroltevzw
DISPLAY : LRX22G.G920VVRU1AOC3
HARDWARE : samsungexynos7420
HOST : SWDD5706
ID : LRX22G
MANUFACTURER : samsung
MODEL :SM-G920V
PRODUCT: zeroltevzw
INCREMENTAL : G920VVRU1AOC3
RELEASE : 5.0.2
SDK_INT : 21
RADIO :G920R4TYU1AOD3
