I used adb to install TWRP onto my Nexus 5. Now it is in a bootloop, and TWRP does not seem to be able to mount anything. When it reboots it looks like it automatically goes to the TWRP where it says it is running OpenRecoveryScript but it is unable to mount anything. I tried a boot start to Recovery and it worked but when i tried a factory reset it says the same thing.
View 1 RepliesI wanted to install a custom Rom on my Nexus 5 running Android 6.0 so I downloaded TWRP latest and unlocked the Bootloader and installed TWRP.
Now the OS doesn't bootup anymore and the TWRP starts but gets rebooted all the time.
Tried to install an older TWRP version 2.8.70 and sideloaded and installed Pure Nexus Rom but this doesn't fix the problem.
Wiping anything from TWRP gives error messages...
Last night, I left my phone on charge. It was working normally and the software was functional etc. However, once I woke up, the phone was constantly restarting itself, and wouldn't load past the boot animation. I tried to load up fastboot to enter the TWRP recovery, however, the phone froze on the load screen. I should also add that my custom boot animation was replaced by the CyanogenMod mascot.
I tried to use WugFresh's NRT to flash a factory image of Android 6, however, the command terminal indicated that each process had failed. This did not restore the phone to its original condition.
I should also point out that I have been running a CM 12.1 nightly, which has been very stable and I have been using this nightly, without major problems (bar the infrequent system UI crashes) for a couple of months. It is obviously rooted and I have a Nandroid backup, which I can't access for aforementioned reasons.
I was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not: Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there.
Im using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View RelatedAfter manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 Replies View RelatedFastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View RelatedI've been using Nexus 5 since Nov '13, but this is the first time i'm facing a serious issue in my device.I was browsing through Chrome and my Battery was 73%, all of a sudden my device rebooted and here comes the main issue/problem.My device is suffering a boot loop only displaying the google logo for 3-5 seconds and again it reboots.Occasionally the boot animation starts but no success, again it reboots.
I tried to enter fastboot menu, it enters but it doesn't stay there for not more than 2 seconds. So I can't make any choice over there.I tried all the combinations (VOL UP+ Power, VOL DOWN+Power, pressing all the buttons), but its of no use.My device is out of power now.Even when I plug my device to charger/computer its not showing the battery charging animation instead the reboot loop occurs.I suspect it can be a problem with the power button in the board.
My device details:
I'm running Stock Android 4.4.4 with stock kernel.(not modified any system files)
TWRP recovery V 2.7.1.1
UNLOCKED ( @present Locked)
ROOTED. @present Unrooted)
My Nexus 5 is stuck at the flying dots after Lollipop OTA update. Already try factory reset. Cant connect to my Lap (running Windows 10) because it says in the device manager: Unknown USB Device (Device Descriptor Request Failed), so I cant manually update the driver and cant access it with ADB and Fastboot tool. The device has no USB debugging enabled. In the old computer where I used to connect the device and has the drivers installed says the same thing in device manager as my new laptop.
View 10 Replies View RelatedI'm not really and expert on flashing stuff on Android. I was pretty comfy not rooting my phone for more than a year. TBH, I didn't really need it, because I was not a power user, but I've recently installed a root app called King User (King Root, etc.). It made things easy for the very few apps I could not use without root permission. However, when I received the latest OTA (5.1.1. security update) I had to disable root authorization in order to install it. So I disabled it using the app's built in authorization setting.
The OTA update failed and gave me the error with the opened up android and the red exclamation mark. So I thought that the app messed something up. Disabling in house did nothing. Uninstalling it did nothing. So I decided to replace it with SuperSU using this guide: [URL] .... After SuperSU deleted KingUser and updated itself the phone remained stuck inside a bootloop. So I figured this replacement process messed up permissions.
My bootloader is locked and I have no custom recovery (because like I said, I just needed temporary root access for a couple of apps and wanted to avoid the hassle). When I enter Recovery mode in default fastboot it gives me the "No command" error (probably because of SuperSU permission).
Now I don't even know if the phone is rooted or not. USB debugging was not enabled last time the phone was on and now I think I'm stuck in this point where nothing works without something else. Doing a full recovery now would probably be asking for a lot, but right now, I would be happy if I could just do a factory reset or something...
Nexus on bootloop tried every method ,most of them . Flashing new factory image is also of no good. Cleared cache , factory reset and still on bootloop. On flashing lollipop factory image it gets stuck on boot loop and on flashing KitKat factory image or using any custom ROM like cyanogenmod it gets through boot but is unable to detect sim and apps like play store and camera keep crashing and refuses to open.
View 2 Replies View RelatedA colleague of mine (yes honestly it wasnt me) reported that his Nexus 5 was stuck with as he put it "the wee android man in the middle of the screen" Then, before he give the phone to me to look at he said that he had tried some things with images to get it to work but it didnt work. so truthfully i am not sure what he has done or not done but the phone is stuck as follows:
When you turn the phone on you have the android robot which looks like it is doing an update.
I have gone into bootloader where I have the option to Start, Recovery Mode, Restart Bootloader and Power Off. The lock state in the Fastboot mode shows unlocked.
No matter which option you take (Even Recovery) it just goes back to the android screen that looks like it is trying to update....i cant get to the android with the exclamation mark that would allow me to do a factory reset. At this stage of the game im not worried about any lost data etc.
Well as the title says, I modified framework-res.apk to change navbar dpi (using apktool and copying original META-INF folder and Manifest in my compiled apk). The problem is that when I push the framework to the N5, it wont boot.
Code:
adb reboot recovery
adb shell mount system
adb push framework-res.apk /system/framework/framework-res.apk
adb -d shell chmod 644 /system/framework/framework-res.apk
adb reboot
And I also tried to take a logcat when in bootloop (idk if it's stupid or not):
Failed to parse /system/framework/framework-res.apk: Failed to collect certificates from /system/framework/framework-res.apk
I had a new nexus 5 running on android 6.0 ,I was planning on rooting my phone , had the oem bootloader unlocked - the twrp installed , however after flashing the elementalx and beta supersu , my phone was in a bootloop for 4 hours. I did everything as told in the tutorial video for rooting and now i think that by flashing the nexus 5 stock rom it might be useful in recovering my phone... How to flash stock rom on nexus... when I tried getting into the recovery mode it was still in twrp ...
View 4 Replies View RelatedI was using the Cataclysm Rom for months without any problems. Today I restarted my phone (I do this every other day, when it gets a little bit slow) and it stuck in bootloop.
I tried wiping dalvik/cache, doing a factory reset, reflashing Cataclysm, nothing worked. So I decided to go back to stock (using [URL] ....) and I'm still stuck in a bootloop every time. I can access and use fastboot/stock recovery in the normal way, but it won't boot.. What I could do?
My unlocked Nexus 5 during kingroot rooting process my laptop shut down and now its in a boot loop stuck at logo. I can bring up bootloader and ADB but no back up or recovery on phone hard drive.exactly what do I do?
View 2 Replies View RelatedI am having problems with my Nexus 5, and i would like to know how to enable MTP IN TWRP �n version 2.6.34
View 3 Replies View RelatedA friend gave me his nexus 5 because it have a problem, one day the phone was stuck on boot screen (the flying balls of lollipop) and to add difficulty (can't be easy right?) windows doesn't recognize the phone but it recognize my nexus 5 with the same cable on the same usb port....
I get a "Device Descriptor Request Failed"(the usb port on the nexus seems to be ok) but my nexus get none ... Is it a hardware issue ? I heard that there is issues with nexus 5's motherboard...
I can enter the fastboot and recovery but after a wipe, still stuck..... Not rooted and booloader locked....
I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed..
View 10 Replies View RelatedRooting and unlocking. Up until I rooted my nexus 5 in the hopes to get side by side apps I haven't rooted since my gs2. Anyways I rooted my phone via the nexus 5 root toolkit and unlocked the bootloader and whatnot. I found out that I couldn't do side by side because it wasn't available for my version of android. I attempted to unroot and return to stock and I just unrooted and locked the bootloader. Can't figure out how to return my phone to stock without twrp. Every time I try to do OTA updates it just restarts to twrp and it's super annoying. How to get back to stock so I can do OTA updates?
View 2 Replies View RelatedI have updated to android m on my nexus 5. However when trying to root using instructions from: [URL] ...
I'm not able to install twrp with adb as well as one click recovery installer.bat as mentioned in the article.
I follow the steps and it shows it sent the recovery image and when reboot, it optimizes the apps as well ,however when i go to recovery, i get android dead icons with X.
Using a rooted nexus 5 running stock 4.4.4. And twrp 2.8.x.x ... I want to restore an old twrp backup I had made some time ago (with an earlier version of twrp) and moved to my pc. So I copied that backup from my pc to the twrp folder in the nexus 5. But when I reboot into TWRP, twrp lists other backups, but not the one I just copied back into its folder. How can I get twrp to see and restore that nandroid backup?
View 3 Replies View RelatedI Am New To Nexus 5 , I wanted to know is there is any way to install twrp without losing data or any way to unlock bootloader without losing data ...
View 2 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 1 Replies View RelatedI am having trouble finding my nandroid backup file made with TWRP. I can't even find the TWRP directory! This file system is so confusing! I have tried ES File Explorer, Root Browser, and tried searching the file system using my laptop. I have even searched for "2014-12-13" and nothing is found. Nexus 5 on Android 5.0 w/ TWRP v2.8.1.0
View 10 Replies View Relatedi have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
I am on a stock rooted Nexus 5 (with TWRP). I want to install a custom rom; however, I would like to do a clean install of the custom rom (making sure no files/settings of my previous installations are left if that makes sense). What's the best way to go about this? Does it mean I have to install both the custom rom and the recovery again in order to do a clean install?
View 2 Replies View RelatedWell I'm back at it again. Always had a problem of phone shutting off and entering qhdbootloader 9008 (however it goes) and I just run the boarddiag tool but this time its not that far. Well whenever it does that I also have to reflash system but now when I try to flash a rom, it gets to the installing system part in twrp and hangs, then reboots at the google logo until I enter recovery again. Aka I cant flash a rom, hangs and reboots at the installing system portion
View 5 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies View RelatedSo I updated to Marshmallow from Lollipop via fastboot on my Mac. Upon installing SuperSU and rebooting, I got stuck on the boot animation. Cache wipe and factory reset - still no go, and after the factory reset, I lost TWRP. I tried installing it again only to receive a black screen when rebooting into recovery mode. Tried another factory reset and reinstalled Marshmallow - same issue. I have contacted Google and there's nothing they can do.
View 4 Replies View Related