Google Nexus 5 :: How To Enable MTP In TWRP
Feb 7, 2016I am having problems with my Nexus 5, and i would like to know how to enable MTP IN TWRP �n version 2.6.34
View 3 RepliesI am having problems with my Nexus 5, and i would like to know how to enable MTP IN TWRP �n version 2.6.34
View 3 RepliesI flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed..
View 10 Replies View RelatedI was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not: Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there.
Rooting and unlocking. Up until I rooted my nexus 5 in the hopes to get side by side apps I haven't rooted since my gs2. Anyways I rooted my phone via the nexus 5 root toolkit and unlocked the bootloader and whatnot. I found out that I couldn't do side by side because it wasn't available for my version of android. I attempted to unroot and return to stock and I just unrooted and locked the bootloader. Can't figure out how to return my phone to stock without twrp. Every time I try to do OTA updates it just restarts to twrp and it's super annoying. How to get back to stock so I can do OTA updates?
View 2 Replies View RelatedI have updated to android m on my nexus 5. However when trying to root using instructions from: [URL] ...
I'm not able to install twrp with adb as well as one click recovery installer.bat as mentioned in the article.
I follow the steps and it shows it sent the recovery image and when reboot, it optimizes the apps as well ,however when i go to recovery, i get android dead icons with X.
Using a rooted nexus 5 running stock 4.4.4. And twrp 2.8.x.x ... I want to restore an old twrp backup I had made some time ago (with an earlier version of twrp) and moved to my pc. So I copied that backup from my pc to the twrp folder in the nexus 5. But when I reboot into TWRP, twrp lists other backups, but not the one I just copied back into its folder. How can I get twrp to see and restore that nandroid backup?
View 3 Replies View RelatedI used adb to install TWRP onto my Nexus 5. Now it is in a bootloop, and TWRP does not seem to be able to mount anything. When it reboots it looks like it automatically goes to the TWRP where it says it is running OpenRecoveryScript but it is unable to mount anything. I tried a boot start to Recovery and it worked but when i tried a factory reset it says the same thing.
View 1 Replies View RelatedI Am New To Nexus 5 , I wanted to know is there is any way to install twrp without losing data or any way to unlock bootloader without losing data ...
View 2 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 1 Replies View RelatedI am having trouble finding my nandroid backup file made with TWRP. I can't even find the TWRP directory! This file system is so confusing! I have tried ES File Explorer, Root Browser, and tried searching the file system using my laptop. I have even searched for "2014-12-13" and nothing is found. Nexus 5 on Android 5.0 w/ TWRP v2.8.1.0
View 10 Replies View RelatedI wanted to install a custom Rom on my Nexus 5 running Android 6.0 so I downloaded TWRP latest and unlocked the Bootloader and installed TWRP.
Now the OS doesn't bootup anymore and the TWRP starts but gets rebooted all the time.
Tried to install an older TWRP version 2.8.70 and sideloaded and installed Pure Nexus Rom but this doesn't fix the problem.
Wiping anything from TWRP gives error messages...
i have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
I am on a stock rooted Nexus 5 (with TWRP). I want to install a custom rom; however, I would like to do a clean install of the custom rom (making sure no files/settings of my previous installations are left if that makes sense). What's the best way to go about this? Does it mean I have to install both the custom rom and the recovery again in order to do a clean install?
View 2 Replies View RelatedWell I'm back at it again. Always had a problem of phone shutting off and entering qhdbootloader 9008 (however it goes) and I just run the boarddiag tool but this time its not that far. Well whenever it does that I also have to reflash system but now when I try to flash a rom, it gets to the installing system part in twrp and hangs, then reboots at the google logo until I enter recovery again. Aka I cant flash a rom, hangs and reboots at the installing system portion
View 5 Replies View RelatedLast night, I left my phone on charge. It was working normally and the software was functional etc. However, once I woke up, the phone was constantly restarting itself, and wouldn't load past the boot animation. I tried to load up fastboot to enter the TWRP recovery, however, the phone froze on the load screen. I should also add that my custom boot animation was replaced by the CyanogenMod mascot.
I tried to use WugFresh's NRT to flash a factory image of Android 6, however, the command terminal indicated that each process had failed. This did not restore the phone to its original condition.
I should also point out that I have been running a CM 12.1 nightly, which has been very stable and I have been using this nightly, without major problems (bar the infrequent system UI crashes) for a couple of months. It is obviously rooted and I have a Nandroid backup, which I can't access for aforementioned reasons.
I have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies View RelatedSo I updated to Marshmallow from Lollipop via fastboot on my Mac. Upon installing SuperSU and rebooting, I got stuck on the boot animation. Cache wipe and factory reset - still no go, and after the factory reset, I lost TWRP. I tried installing it again only to receive a black screen when rebooting into recovery mode. Tried another factory reset and reinstalled Marshmallow - same issue. I have contacted Google and there's nothing they can do.
View 4 Replies View RelatedIs it possible to enable my SD card OTG adapter natively without rooting my nexus 6? I would prefer not to use an app to use my OTG SD card adapter.
View 4 Replies View RelatedI'd love to enable the diagnostic mode in my Nexus 5 so that I can trace the radio interface with software such as QXDM, X-CAL, etc... but I've had no luck so far.
basically I'm trying to change the variable sys.usb.config to [diag,adb] as shown in this post for the Nexus 4. I'm doing:
(if you run getprop you see that the correct order is sys.usb, not usb.sys as shown in that post)
However, when I enter this command the phone automatically reboots... and the value is reverted back to [mtp,adb].
Do you know of any 'friendlier' way to enable diag mode on the Nexus 5? For example, in the Galaxy S4 you can just dial *#0808# to get into the USB config menu, which easily allows you choose the DM mode... but I can't find a similar menu on the Nexus 5.
Seems a bit absurd to me that a developer-oriented phone is the hardest one to put in diag mode... I am rooted...
I bought a nexus 5 I was thinking that's the D821 model of my nexus 5, because when i put my SIM card on my phone it's working.
Recently I bought a 4G SIM card and i put it on my phone and it's works very well but when i want to use it to connect the 4G i can't, because my carrier has 3 and 20 bands and my nexus 5 D820 not supports those bands ! How to enable LTE band 3 or 20 on my D820 model.
I use a wireless hot spot now ever since CableOne decided to crash every damn night.
I have a Wireless AC capable adapter on my computer, yet the wireless hot spot on the Nexus 5 only streams at N speeds.
I remember reading that in the preview of 6.0, there was the ability to enable home screen rotation. Now that I have officially (wugfresh) upgraded to 6.0, I cannot find this feature.
View 6 Replies View RelatedToday I've suddenly started getting a grey pop up with the following text:You must enable sleep mode in "Settings" -> "Sleep settings" settings screen.I haven't changed anything or installed anything new so not sure what's going on.
View 5 Replies View RelatedIs it possible to enable flashing LED notifications on my Nexus 6 running CM 12?
View 6 Replies View RelatedWith the screen being nice and big, is there any way to enable multiple windows / multitasking on the Nexus 6?
View 21 Replies View RelatedWhy doesn't my Nexus 6 show the enable wireless display? Lollipop 6 ....
View 1 Replies View RelatedIs there a way to enable the dial pad to show up instead of favorites when you click the telephone icon?
All of my other android phones I could either dial by name as in spell it out using the alpha buttons or if I wanted to call my wife and her number is ie. 614-555-5555 I could dial 0067 on the pad and it was the only number with that combo and pop her name up. Now I have to dial 6145555 and it pops her name up. Is there a way to change this??
I came from a Moto RZR Maxx, went to the Samsung s6 (dialer worked great but no data and voice at the same time) Now to the nexus6...
I have a nexus 5 running on android 6.0.1.I was trying to root it when I found that the 'Enable oem unlock' option present in the developer options is missing on my device.The nexus root toolkitv2.1.0 also failed to detect my device.
View 3 Replies View RelatedI just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
I was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies View RelatedIm using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View Related