I just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
I tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies View RelatedSo I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed..
View 10 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 1 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies View RelatedI was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies View RelatedIm using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View RelatedI tried to create a backup with TWRP of PureNexus the 29M build with EX kernel and it has given me an error.
It says 'E:createTarFork() process ended with ERROR=255'
Why can I not create a backup? I really need to back it up!!!!
I was rooted on 6.0 and wanted to keep my user data, so I downloaded the 6.0.1 factory image and individually flashed the different pieces with Fast boot.
I also updated to the latest TWRP.
My phone now boots to 6.0.1 and works normally, but when I go into recovery TWRP can't access the internal SD card and just shows 0 bytes, so I can't reflash SuperSU.
After manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 Replies View RelatedCannot seem to flash factory image from Google. Trying to do it via adb but cannot push onto device. Says "cannot open no such file or directory". What can I try?
View 7 Replies View RelatedI unlocked my bootloader, flashed Chainfire's systemless boot.img, flashed TWRP twrp-2.8.7.1-angler.img and when I took into recovery TWRP is asking me for a password to decrypt. I don't remember setting a password and don't know if there is a default one.
View 10 Replies View RelatedI can't seem to find my way to FULLY wipe when I want to flash or try a new ROM. I just installed an RRO that resulted in SystemUI crash, I then went to reflash the ROM, same results. Decided to WIPE in TWRP and reflash the rom, the SystemUI FC is still there ! Wipe, Flash ROM, then Wipe, same result... What's wrong with my TWRP ? I am on the latest. I just restored an old backup, and I have the same FC of system UI !
View 2 Replies View RelatedI'm running the latest TWRP 3.0.0.0. I noticed when taking a backup, and it asks which partitions I'd like to back up, I notice a couple new ones I've not seen before. System image, vendor image, right below, system, and vendor. I notice the "image" partitions are slightly larger than regular system and vendor. What are these, and should they be included in a regular backup?
View 2 Replies View RelatedOn Chainfire's thread there is a link to a boot image for the MDB08K build of our phones, but nothing else. I personally have build number MDB08L and when I tried rooting the phone and flashing TWRP, I became stuck in a bootloop that I was eventually able to recover from. That was using the stock boot image for the MDB08L build number from Google's site.
My question simply is, how can we root any version other than the MDB08K build because we don't have a modified boot image of any other build.
Fastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View RelatedAs the title states, I flashed the lastest Cataclysm (stable) and ElementalX kernel(also TWRP asked me that SuperSU wasn't present and to flash it so I did, that might've messed it up), phone booted up fine and set my fingerprint password and everything. I decided to reboot my phone and the phone encrypted itself and now the ROM is force closing and I can't do anything. It asks for a password every time the recovery starts up (I tried default_password, no go) and TWRP won't let me decrypt.
So my question is, is there a way to decrypt without erasing userdata? Would really like to keep my internal storage. I have lots of important pictures and files.
Having issue with TWRP not erasing/flashing roms properly..I have a dark theme installed Domination Theme with the extras (MMS, contacts, etc) and i did a very clean install, normally I go Wipe > Advanced and select all partitions and format it.After flashing another rom, I noticed some parts are still dark themed like the MMS, Google search bar, contacts, etc
View 3 Replies View RelatedThe title pretty much explains it. I just finished installing CM13 on my Nexus 6P, but realised I'd downloaded the wrong GApps, so booted up into CM13 (Worked fine) and then downloaded the newest GApps into internal storage (Which was NOT empty when I connected over USB to my PC) yet when I went to flash the new GApps, TWRP tells me that I have nothing in my internal storage folder. I'm confused as to how that could happen.
View 3 Replies View RelatedI have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies View RelatedSo I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies View RelatedI was restoring a twrp backup and when it reaches "flashing system image" in the restore process it just reboots. Ive tried a few things but cant get it going. It just bootloops.
View 4 Replies View RelatedI'm trying to sideload the new OTA, but for some reason when Nexus Root Toolkit gets to the point where it actually tries to sideload it, ADB disconnects. I went into the driver software and it's a microsoft driver. I've tried replacing it with the Google USB driver but windows just says "Windows has determined this is the best driver for your device" and doesn't let me. I've been trying all day.
View 4 Replies View RelatedI've tried a few methods of getting recovery back but so far have failed. I always end up with that droid and a red warning triangle, which if left long enough it will boot into android on its own..
View 6 Replies View RelatedI reflashed all the factory images to my Nexus 6P (except userdata), and then restored a TWRP backup of the data partition. This worked, my phone boots up and obviously has my installed apps, etc. But... on the Nexus 6P when you restart the phone you have to enter your lock pattern or PIN. My phone was previously configured with a pattern. It seems the TWRP data backup didn't backup the lock pattern, because it doesn't recognize my pattern.
My fingerprint is recognized, but on the Nexus 6P you still have to enter the lock pattern or PIN when you first reboot. So, I have no way to get into the phone. I tried setting a new lock screen password with Android Device Manager, but it doesn't work. I still get the screen asking for the lock pattern. Is there any way I can get into my phone without blowing away all the data?
My Nexus ha been a dream. Though I've hit a few bumps, I don't expect to waste money on other flagships again.I don't need to be able to right this instant, but wiping cache is one of my regular troubleshooting tools. Upon troubleshooting an MMS issue I was having, I discovered my recovery wasn't working properly. Though I fixed the MMS issue by resetting APN settings, the recovery thing has been bothering me.
I am running stock and locked. I have done nothing to this phone to warrant it being my fault. The problem is simple (and a Google search indicated, common). When you get to Recovery, you get a droid on its back, a red exclamation mark and "NO COMMAND". Doesn't matter if you hold up and power, tap up, or get there from the bootloader. The recovery software is seemingly missing completely.
So just purchased my nexus 6p and after reading the index by Heisenberg, I came to know that I have four updates to install. So downloaded all serial wise.
But the problem is when I boot into stock recovery and select apply update from SD card it says sdcard not mounted. So how to solve this.
Second thing after mounting can I apply all updates serialwise one by one and then reboot or do I have to apply an update and then boot then apply the second one and so on.
So this may be a stupid question, but this is my first Nexus device. I will have a 6P delivered Thursday and plan to unlock, decrypt, and install TWRP. The guides so far reference using MDB08K, and the modified boot is only for this version currently. After I install TWRP, am I able to install the factory image for the latest MDB08M and just exclude flashing certain images? Or do I need to flash them all then wait for a new modified boot image for 08M and install TWRP over again?
View 10 Replies View RelatedSo I was running screwd ROM with elementalX kernel. Everything was working great but I'm a long time DU user. Went to their G+ page flashed ROM. I had issues with it so I wiped and restored my backup of screwd ROM through TWRP. The first go around I selected to restore all partitions. It got stuck on the boot logo. Booted back into recovery and restored android again. This time I unchecked the vendor image box and restored the rest of the partitions. Worked like a charm.
View 7 Replies View Related