Huawei Nexus 6P :: Just Installed CM13 Now TWRP Shows Internal Storage As 0MB
Feb 1, 2016
The title pretty much explains it. I just finished installing CM13 on my Nexus 6P, but realised I'd downloaded the wrong GApps, so booted up into CM13 (Worked fine) and then downloaded the newest GApps into internal storage (Which was NOT empty when I connected over USB to my PC) yet when I went to flash the new GApps, TWRP tells me that I have nothing in my internal storage folder. I'm confused as to how that could happen.
View 3 Replies
ADVERTISEMENT
Nov 25, 2015
I saw the cm website had a new cm13 nightly for angler, so I decided to try it out, so I downloaded it and gapps, and rebooted into twrp, then I wiped everything besides for internal storage and then I proceeded to Install cm, it took a few minutes, and then when it was done I rebooted. The first sign of something weird was that after the regular your device can't be checked for corruption message it went black and then said that my device is corrupt in red letters, then it started the cm boot animation, I waited about 5 minutes and nothing happened so I rebooted into recovery and it asked me for an encryption password...
My device was not previously encrypted and I didn't require a password to Install cm, so I tried wiping everything besides for internal storage, and then I was about to flash again, but non of my files were there so I had nothing to flash.... So I rebooted into my bootloader and fastbooted stock and now I'm on stock, but all my files and backups are gone. I guess that's why it's good to have an external sd, because that never got wiped by installing a rom before, and if I would have one, I would have all my pictures, music, and app backups. But now I have to start from scratch all because I tried a new build cyanogen mod
View 10 Replies
View Related
Dec 18, 2015
I have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies
View Related
Dec 18, 2015
I have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 1 Replies
View Related
Dec 21, 2015
I was rooted on 6.0 and wanted to keep my user data, so I downloaded the 6.0.1 factory image and individually flashed the different pieces with Fast boot.
I also updated to the latest TWRP.
My phone now boots to 6.0.1 and works normally, but when I go into recovery TWRP can't access the internal SD card and just shows 0 bytes, so I can't reflash SuperSU.
View 3 Replies
View Related
Dec 12, 2015
I am having the problem of writing to my internal storage. Ever since upgrading to 6.0.1 I have not been able to download anything successfully. I am currently on the current android version, do I need to have the phone encrypted for storage to read/write?
[URL] ... was the guide I used.
View 2 Replies
View Related
Dec 31, 2015
I have this issue and have spent the last 2 days trying to fix it to no avail. I'm wanting to start a fresh to resolve it which means wiping internal storage of music/photos etc. One question though, what's the best way of doing this to them install a fresh ROM?
View 2 Replies
View Related
Nov 28, 2015
I've tried dirty flashing, factory reset, system wipe, and a full reflash of Googles stock images. Still when I try and boot into CM13, I get stuck at the Google logo.
View 10 Replies
View Related
Nov 20, 2015
I had to restore my phone to stock last night by manually flashing the 6P image from Google's Nexus page. I noticed that the storage now shows as 32GB instead of 64GB total. How to fix this?
View 1 Replies
View Related
Feb 13, 2016
I just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
View 7 Replies
View Related
Jan 31, 2016
I was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies
View Related
Dec 30, 2015
Im using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies
View Related
Feb 7, 2016
I tried to create a backup with TWRP of PureNexus the 29M build with EX kernel and it has given me an error.
It says 'E:createTarFork() process ended with ERROR=255'
Why can I not create a backup? I really need to back it up!!!!
View 1 Replies
View Related
Dec 10, 2015
After manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 Replies
View Related
Feb 18, 2016
Cannot seem to flash factory image from Google. Trying to do it via adb but cannot push onto device. Says "cannot open no such file or directory". What can I try?
View 7 Replies
View Related
Nov 5, 2015
I unlocked my bootloader, flashed Chainfire's systemless boot.img, flashed TWRP twrp-2.8.7.1-angler.img and when I took into recovery TWRP is asking me for a password to decrypt. I don't remember setting a password and don't know if there is a default one.
View 10 Replies
View Related
Dec 25, 2015
I can't seem to find my way to FULLY wipe when I want to flash or try a new ROM. I just installed an RRO that resulted in SystemUI crash, I then went to reflash the ROM, same results. Decided to WIPE in TWRP and reflash the rom, the SystemUI FC is still there ! Wipe, Flash ROM, then Wipe, same result... What's wrong with my TWRP ? I am on the latest. I just restored an old backup, and I have the same FC of system UI !
View 2 Replies
View Related
Feb 14, 2016
I'm running the latest TWRP 3.0.0.0. I noticed when taking a backup, and it asks which partitions I'd like to back up, I notice a couple new ones I've not seen before. System image, vendor image, right below, system, and vendor. I notice the "image" partitions are slightly larger than regular system and vendor. What are these, and should they be included in a regular backup?
View 2 Replies
View Related
Nov 8, 2015
On Chainfire's thread there is a link to a boot image for the MDB08K build of our phones, but nothing else. I personally have build number MDB08L and when I tried rooting the phone and flashing TWRP, I became stuck in a bootloop that I was eventually able to recover from. That was using the stock boot image for the MDB08L build number from Google's site.
My question simply is, how can we root any version other than the MDB08K build because we don't have a modified boot image of any other build.
View 4 Replies
View Related
Feb 17, 2016
I tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies
View Related
Feb 4, 2016
Fastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
View 1 Replies
View Related
Jan 27, 2016
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies
View Related
Jan 3, 2016
As the title states, I flashed the lastest Cataclysm (stable) and ElementalX kernel(also TWRP asked me that SuperSU wasn't present and to flash it so I did, that might've messed it up), phone booted up fine and set my fingerprint password and everything. I decided to reboot my phone and the phone encrypted itself and now the ROM is force closing and I can't do anything. It asks for a password every time the recovery starts up (I tried default_password, no go) and TWRP won't let me decrypt.
So my question is, is there a way to decrypt without erasing userdata? Would really like to keep my internal storage. I have lots of important pictures and files.
View 5 Replies
View Related
Nov 14, 2015
Having issue with TWRP not erasing/flashing roms properly..I have a dark theme installed Domination Theme with the extras (MMS, contacts, etc) and i did a very clean install, normally I go Wipe > Advanced and select all partitions and format it.After flashing another rom, I noticed some parts are still dark themed like the MMS, Google search bar, contacts, etc
View 3 Replies
View Related
Nov 7, 2015
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
View 9 Replies
View Related
Nov 22, 2015
I have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies
View Related
Nov 6, 2015
So I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies
View Related
Oct 13, 2015
After upgrading to marshmallow, the internal storage is no longer accessible from my computer. It only works when on twrp recovery mode. Already turned off USB debugging, changed MTP and back, reinstalled the latest ADB drivers, removed the ADB drivers completely and no cigar.
View 7 Replies
View Related
Jan 3, 2016
So as the subject says, somehow my internal storage moved to a different location in my phone. It moved from storage/emulated/0 to data/media/0 somehow. I don't know how but now my apps and file managers are unable to access my internal storage and I am unable to download anything from my browser. My nexus 5 is rooted with Android 6.0 and has experimentalx kernel with xposed. Other than that, my nexus 5 is stock. I tried using root browser and solid browser to move my internal storage back to the correct place but that just gives me an error. I also tried using Android commander to move my storage using my pc but it's giving me permission denied. So I don't know what to do.
View 3 Replies
View Related
Oct 14, 2015
When i click on setting there is a storage & USB atab under device which I click on. When I do this, no internal storage is available in order for me to click on MTP. When I click on the three dots it says Help and Feedback. The phone is not locked. I am tethering my phone to my computer.
My goal is to transfer pictures from my phone to my computer via tethering but I cannot locate the internal storage in order to click on MTP.
View 1 Replies
View Related
Oct 2, 2015
I have installed cataclysm rom after doing the full wipe and it booted up without problems but then I deleted internal storage in twrp and it didn't boot anymore. I have tried reinstalling it but when it started there was no status bar and no soft keys.
View 1 Replies
View Related