After manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 RepliesIm using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View RelatedFastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View RelatedI was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not: Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there.
I used adb to install TWRP onto my Nexus 5. Now it is in a bootloop, and TWRP does not seem to be able to mount anything. When it reboots it looks like it automatically goes to the TWRP where it says it is running OpenRecoveryScript but it is unable to mount anything. I tried a boot start to Recovery and it worked but when i tried a factory reset it says the same thing.
View 1 Replies View RelatedI just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
I was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies View RelatedI tried to create a backup with TWRP of PureNexus the 29M build with EX kernel and it has given me an error.
It says 'E:createTarFork() process ended with ERROR=255'
Why can I not create a backup? I really need to back it up!!!!
I was rooted on 6.0 and wanted to keep my user data, so I downloaded the 6.0.1 factory image and individually flashed the different pieces with Fast boot.
I also updated to the latest TWRP.
My phone now boots to 6.0.1 and works normally, but when I go into recovery TWRP can't access the internal SD card and just shows 0 bytes, so I can't reflash SuperSU.
Cannot seem to flash factory image from Google. Trying to do it via adb but cannot push onto device. Says "cannot open no such file or directory". What can I try?
View 7 Replies View RelatedI unlocked my bootloader, flashed Chainfire's systemless boot.img, flashed TWRP twrp-2.8.7.1-angler.img and when I took into recovery TWRP is asking me for a password to decrypt. I don't remember setting a password and don't know if there is a default one.
View 10 Replies View RelatedI can't seem to find my way to FULLY wipe when I want to flash or try a new ROM. I just installed an RRO that resulted in SystemUI crash, I then went to reflash the ROM, same results. Decided to WIPE in TWRP and reflash the rom, the SystemUI FC is still there ! Wipe, Flash ROM, then Wipe, same result... What's wrong with my TWRP ? I am on the latest. I just restored an old backup, and I have the same FC of system UI !
View 2 Replies View RelatedI'm running the latest TWRP 3.0.0.0. I noticed when taking a backup, and it asks which partitions I'd like to back up, I notice a couple new ones I've not seen before. System image, vendor image, right below, system, and vendor. I notice the "image" partitions are slightly larger than regular system and vendor. What are these, and should they be included in a regular backup?
View 2 Replies View RelatedOn Chainfire's thread there is a link to a boot image for the MDB08K build of our phones, but nothing else. I personally have build number MDB08L and when I tried rooting the phone and flashing TWRP, I became stuck in a bootloop that I was eventually able to recover from. That was using the stock boot image for the MDB08L build number from Google's site.
My question simply is, how can we root any version other than the MDB08K build because we don't have a modified boot image of any other build.
I tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies View RelatedAs the title states, I flashed the lastest Cataclysm (stable) and ElementalX kernel(also TWRP asked me that SuperSU wasn't present and to flash it so I did, that might've messed it up), phone booted up fine and set my fingerprint password and everything. I decided to reboot my phone and the phone encrypted itself and now the ROM is force closing and I can't do anything. It asks for a password every time the recovery starts up (I tried default_password, no go) and TWRP won't let me decrypt.
So my question is, is there a way to decrypt without erasing userdata? Would really like to keep my internal storage. I have lots of important pictures and files.
Having issue with TWRP not erasing/flashing roms properly..I have a dark theme installed Domination Theme with the extras (MMS, contacts, etc) and i did a very clean install, normally I go Wipe > Advanced and select all partitions and format it.After flashing another rom, I noticed some parts are still dark themed like the MMS, Google search bar, contacts, etc
View 3 Replies View RelatedSo I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
The title pretty much explains it. I just finished installing CM13 on my Nexus 6P, but realised I'd downloaded the wrong GApps, so booted up into CM13 (Worked fine) and then downloaded the newest GApps into internal storage (Which was NOT empty when I connected over USB to my PC) yet when I went to flash the new GApps, TWRP tells me that I have nothing in my internal storage folder. I'm confused as to how that could happen.
View 3 Replies View RelatedI have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies View RelatedSo I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies View RelatedApparently I lack sufficient brainpower to do something that, in my small feeble mind, I assumed would be easy: connect my Nexus 5 to a Windows 7 PC via Bluetooth so that I can access the storage files on my Nexus. Very specific, very simple, yet it does not work. I have searched everywhere, and I do not need a tutorial on how to pair them. I have them paired. That pairing does not do anything, it has no function.
On my Nexus 5, it says it is paired to my PC. On my PC, I have a fugly *** Nokia-esque icon that has "Nexus 5" under icon listed under Bluetooth Devices. I do not understand what else I need to do?
P.S. How do I find "Bluetooth drivers"? Windows update has no clue WTF to do, and like I said, I am retarded and lack basic reading comprehension since I cannot find any information that is relevant through searching online.
I was restoring a twrp backup and when it reaches "flashing system image" in the restore process it just reboots. Ive tried a few things but cant get it going. It just bootloops.
View 4 Replies View RelatedI reflashed all the factory images to my Nexus 6P (except userdata), and then restored a TWRP backup of the data partition. This worked, my phone boots up and obviously has my installed apps, etc. But... on the Nexus 6P when you restart the phone you have to enter your lock pattern or PIN. My phone was previously configured with a pattern. It seems the TWRP data backup didn't backup the lock pattern, because it doesn't recognize my pattern.
My fingerprint is recognized, but on the Nexus 6P you still have to enter the lock pattern or PIN when you first reboot. So, I have no way to get into the phone. I tried setting a new lock screen password with Android Device Manager, but it doesn't work. I still get the screen asking for the lock pattern. Is there any way I can get into my phone without blowing away all the data?
Im using twrp 2.8.7.2 the latest one
Im on stock 6.0.1
I can flas cm13 but when i flash gapps(not matter which one nano, pico ext..) i get error 6 or 22, what is wrong???
i can get into the boot loader. but i want to flash the latest stock image so i can get every thing back to stock. any tools i can use or any videos?
View 10 Replies View RelatedI am looking for a clear explanation of how to flash Android 6.0.1 with root and encryption disabled without wiping data. With all the explanations through the forum, all the "if's" and "but's" get confusing and can be clear as mud.
View 10 Replies View RelatedI've tried dirty flashing, factory reset, system wipe, and a full reflash of Googles stock images. Still when I try and boot into CM13, I get stuck at the Google logo.
View 10 Replies View RelatedHowever, I tried taking a few photos in full darkness with flash on or even in low light. I realized that the flash was very dull and did not produce sharp photos as should happen when the flash is on. This phone has dual LED flash and I can still say that my Galaxy S3 with single LED flash had a better performance and produced really good photos with flash on.
The problem I see here is that the flash is kinda yellow in color while S3 had a pure white flash and that too extremely bright, however, with N6P thats not the case.
I was recently on chroma rom with a layers theme applied and I decided to go back to stock and it seems like the layers theme stayed through all the flashes.... I'm not complaining because I much prefer my theme then the stock theme but I'm just curious as to why it stuck
View 2 Replies View Related