I was restoring a twrp backup and when it reaches "flashing system image" in the restore process it just reboots. Ive tried a few things but cant get it going. It just bootloops.
View 4 RepliesI tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies View RelatedUsing a rooted nexus 5 running stock 4.4.4. And twrp 2.8.x.x ... I want to restore an old twrp backup I had made some time ago (with an earlier version of twrp) and moved to my pc. So I copied that backup from my pc to the twrp folder in the nexus 5. But when I reboot into TWRP, twrp lists other backups, but not the one I just copied back into its folder. How can I get twrp to see and restore that nandroid backup?
View 3 Replies View RelatedWell I'm back at it again. Always had a problem of phone shutting off and entering qhdbootloader 9008 (however it goes) and I just run the boarddiag tool but this time its not that far. Well whenever it does that I also have to reflash system but now when I try to flash a rom, it gets to the installing system part in twrp and hangs, then reboots at the google logo until I enter recovery again. Aka I cant flash a rom, hangs and reboots at the installing system portion
View 5 Replies View RelatedOn Chainfire's thread there is a link to a boot image for the MDB08K build of our phones, but nothing else. I personally have build number MDB08L and when I tried rooting the phone and flashing TWRP, I became stuck in a bootloop that I was eventually able to recover from. That was using the stock boot image for the MDB08L build number from Google's site.
My question simply is, how can we root any version other than the MDB08K build because we don't have a modified boot image of any other build.
As the title states, I flashed the lastest Cataclysm (stable) and ElementalX kernel(also TWRP asked me that SuperSU wasn't present and to flash it so I did, that might've messed it up), phone booted up fine and set my fingerprint password and everything. I decided to reboot my phone and the phone encrypted itself and now the ROM is force closing and I can't do anything. It asks for a password every time the recovery starts up (I tried default_password, no go) and TWRP won't let me decrypt.
So my question is, is there a way to decrypt without erasing userdata? Would really like to keep my internal storage. I have lots of important pictures and files.
Having issue with TWRP not erasing/flashing roms properly..I have a dark theme installed Domination Theme with the extras (MMS, contacts, etc) and i did a very clean install, normally I go Wipe > Advanced and select all partitions and format it.After flashing another rom, I noticed some parts are still dark themed like the MMS, Google search bar, contacts, etc
View 3 Replies View RelatedI reflashed all the factory images to my Nexus 6P (except userdata), and then restored a TWRP backup of the data partition. This worked, my phone boots up and obviously has my installed apps, etc. But... on the Nexus 6P when you restart the phone you have to enter your lock pattern or PIN. My phone was previously configured with a pattern. It seems the TWRP data backup didn't backup the lock pattern, because it doesn't recognize my pattern.
My fingerprint is recognized, but on the Nexus 6P you still have to enter the lock pattern or PIN when you first reboot. So, I have no way to get into the phone. I tried setting a new lock screen password with Android Device Manager, but it doesn't work. I still get the screen asking for the lock pattern. Is there any way I can get into my phone without blowing away all the data?
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
I tried to create a backup with TWRP of PureNexus the 29M build with EX kernel and it has given me an error.
It says 'E:createTarFork() process ended with ERROR=255'
Why can I not create a backup? I really need to back it up!!!!
I was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies View RelatedI'm running the latest TWRP 3.0.0.0. I noticed when taking a backup, and it asks which partitions I'd like to back up, I notice a couple new ones I've not seen before. System image, vendor image, right below, system, and vendor. I notice the "image" partitions are slightly larger than regular system and vendor. What are these, and should they be included in a regular backup?
View 2 Replies View RelatedI haven't been able to figure out for sure whether or not it's possible to modify lcd_density without touching build.prop. Past versions of Android allowed one to override build.prop settings using a local.prop file on the userdata partition, but I've been unable to get that working.
It looks like in the past you could put qemu.sf.lcd_density into /data/local.prop, but that's not working for me, nor is any permutation of that variable or location of local.prop that I've tried. Did Google disable local.prop or officially disallow overriding of read only settings?
Currently flashing back to stock with the steps given by Heisenberg's step by step guide, number 11, how to flash the factory image.
At the command fastboot flash system C:anglerimagessystem.img and it has sat here for over an hour and a half now with the output of writing 'system'. If I'm not mistaken, my phone is basically bricked at this point, as all I have written to the phone right now is recovery and bootloader really, and since I flashed the stock bootloader that means it is relocked.
Is there any way I can unlock it from here and then flash TWRP again, and then restore one of my backups of my 6P to at least get it working again?
I'm stock rooted when I restore my back up when trying to unlock it when I type my pin or used swipe code it doesn't authorize it
View 4 Replies View RelatedI rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies View RelatedSo I made a backup as I wanted to dirty flash PN again to change kernel. My phone bootlooped after I flashed PN and franco kernel. So i decided to restore my working backup..still boot looping... WHY?! this phone never successfully restores backups in my experience.
View 6 Replies View RelatedIs there a way to do this outside of initial set up?
View 2 Replies View RelatedI restored my device from a backup I had and now when I put in my pattern it says wrong pattern... Do I have any options besides restoring.....
View 10 Replies View RelatedI just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
Im using twrp 2.8.7.2, can flash cm13 but when im trying to flash gapps i get error 64,I've tried all kind of gapps and nothing work, why???
View 2 Replies View RelatedI had to just restore my iPhone and just wondering if during the Restore Process(where only apple logo was on screen) if someone text messaged me, would it still of come through, after the Restore Process was finished? i just want to make sure i havent missed any messages.
Info:
iPhone 4S, iOS 5.0.1
I was rooted on 6.0 and wanted to keep my user data, so I downloaded the 6.0.1 factory image and individually flashed the different pieces with Fast boot.
I also updated to the latest TWRP.
My phone now boots to 6.0.1 and works normally, but when I go into recovery TWRP can't access the internal SD card and just shows 0 bytes, so I can't reflash SuperSU.
After manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
View 3 Replies View RelatedCannot seem to flash factory image from Google. Trying to do it via adb but cannot push onto device. Says "cannot open no such file or directory". What can I try?
View 7 Replies View RelatedI unlocked my bootloader, flashed Chainfire's systemless boot.img, flashed TWRP twrp-2.8.7.1-angler.img and when I took into recovery TWRP is asking me for a password to decrypt. I don't remember setting a password and don't know if there is a default one.
View 10 Replies View RelatedI can't seem to find my way to FULLY wipe when I want to flash or try a new ROM. I just installed an RRO that resulted in SystemUI crash, I then went to reflash the ROM, same results. Decided to WIPE in TWRP and reflash the rom, the SystemUI FC is still there ! Wipe, Flash ROM, then Wipe, same result... What's wrong with my TWRP ? I am on the latest. I just restored an old backup, and I have the same FC of system UI !
View 2 Replies View RelatedFastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
Is it possible to unlock bootloader, root, flash twrp and somehow flash the stock rom? If yes, where can I get the rom files for flashing with twrp?
View 9 Replies View RelatedThe title pretty much explains it. I just finished installing CM13 on my Nexus 6P, but realised I'd downloaded the wrong GApps, so booted up into CM13 (Worked fine) and then downloaded the newest GApps into internal storage (Which was NOT empty when I connected over USB to my PC) yet when I went to flash the new GApps, TWRP tells me that I have nothing in my internal storage folder. I'm confused as to how that could happen.
View 3 Replies View RelatedI have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies View Related