Galaxy S6 :: Unable To Boot Into TWRP Recovery After Flashing Using Odin
May 1, 2015
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
View 10 Replies
ADVERTISEMENT
Aug 8, 2015
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
View 2 Replies
View Related
Nov 7, 2015
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
View 9 Replies
View Related
Feb 22, 2016
SM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
View 1 Replies
View Related
Aug 1, 2015
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
View 9 Replies
View Related
Jun 23, 2015
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
View 2 Replies
View Related
Jul 20, 2015
I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
View 2 Replies
View Related
Sep 24, 2015
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
View 2 Replies
View Related
May 5, 2015
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies
View Related
Dec 27, 2014
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
View 1 Replies
View Related
Jul 14, 2015
I got a little problem with my TWRP.
Galaxy S6, Android 5.0.2
TWRP v2.8.7.1
I noticed it when i tried to install the Camera Mod. I tried flashing the zip, using TWRP.
It said, that the flashing was done succesfully, but nothing happened. I also tried it with anothter zip file, but still no change.
The folders which should have been changed doesn't show a change in the last changed dates etc.
View 8 Replies
View Related
Nov 24, 2015
I'm new to the Samsung S6. Just brought a second hand S6 edge from eBay, and how to flash twrp recovery to the phone. It's been a while since I flashed a Samsung phone unsure on the process on how do it. I'm not really worried about tripping know....
View 1 Replies
View Related
Jul 9, 2015
I have a G920F. It is rooted via odin flashing Unikernel. When I tried to flash TWRP via TWRP Manager (installed from the playstore), the phone would get into a bootloop. It got stuck at the Galaxy S6 screen, with the red line up on the top left corner saying "Recovery Seandroid not enforcing" or something like that. I had to use KIES to get it back up and running (no data loss). Now I rooted it again, and root was successful. I want to get TWRP flashed in order to install the custom ROMS. How do I do that now? I don't want to have to use KIES to recover my phone again. It is running 5.1.1 btw.
View 4 Replies
View Related
Sep 26, 2015
I flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
View 6 Replies
View Related
Jul 27, 2015
I rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies
View Related
Aug 18, 2012
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies
View Related
May 20, 2015
I want to just boot twrp (fastboot boot ..... ) not flash, so I can install xposed without tripping know or anything
View 3 Replies
View Related
Dec 25, 2015
I had flash TWRP via odin couple times but nothing, it again boot into stock recovery?
View 1 Replies
View Related
Mar 27, 2015
My GS5 was working just fine this morning. Out of nowhere I picked up my phone and it was on a black screen with green, white, red, then white again, then grey, blue and red words. It reads as follows;
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
sbli partition doesn't exist
ODIN MODE
PRODUCT NAME: SW-G900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
I have tried everything from removing battery, removing SD CARD, SIM CARD, connecting to charger, connecting to USB cable on my laptop, holding volume up, home, and power button. My biggest fear is losing all my data. I have 100's of photos of my 3 month old newborn on my phone memory because I was running low on my SD CARD. I can't fathom losing all her newborn pictures.
View 4 Replies
View Related
Oct 9, 2015
I have not used my phone in any wrong way. I did not install a custom rom or anything. no root. randomly in my every day normal usage of my phone, it started to restart. and the the problem got worse and worse. for a few minutes, i will be able to use my phone but then my phone will restart and be stuck restarting. most of the times I can't even go into recovery mode. It restarts again when i get to that. I already resetted my phone, and I wiped the partition.
I have a samsung galaxy s6 SM-G920W8 telus/koodo 32 gb. i got the battery replaced by samsung but that didnt work. i noticed that after a few hours, my phone stops restarting when it reaches to 10% battery life.
View 7 Replies
View Related
Dec 5, 2015
Galaxy S6 SM-G920V firmware G920VVRU3BOG5 (5.1.1)
When I'm trying to power on the phone, I get the initial black and white "Samsung Galaxy S6" screen. Then everything goes black and the blue LED on the top left lights up and stays on, does not flash or dim, just stays on. The phone does not vibrate or make any sound when it does this.
What I've tried to fix it:
1) Power + Volume down (maintenance boot mode) ... I've tried normal boot, factory reset and booting in safe mode, all just give me a black screen with the blue LED.
2) Power + Volume Up + Home (andoid system recovery screen) ... When doing this, the phone displays the black and white "Samsung Galaxy S6" screen, followed by a bluish colored screen with a little android guy on it, followed by the dead android guy with a yellow exclamation triangle over his head, then goes into the android system recovery menu. On this screen I can wipe data/factory reset and wipe cache partition and reboot and I still get a black screen with a steady blue LED.
3) Power + Volume Down + Home followed by Volume Up (Downloading screen) ... Takes me to the bluish screen warning me about downloading a custom OS. After hitting up it does not show the knox has ever been triggered. I've tried using ODIN 3.10.6 to reinstall fresh firmware (5.1.1 G920VVRU3BOG5) and after it successfully installs it, it boots to a black screen with the steady blue LED.
View 1 Replies
View Related
Dec 7, 2013
I have ClockWord Mod Recovery installed and its V6.0.3..2. I wish to install a new ROM but it requires at least V6.0.4.5 and I can't seem to be able to upgrade. I was wondering if I change my recovery to TWRP and I manage to upgrade to the latest version?! I was wondering how do I actually convert ?
View 4 Replies
View Related
Aug 6, 2014
I got an m8 from a friend that had it rooted so he could use it unlocked on tmobile. I looked up how to get stock sense back onto it and successfully did that although the device is still rooted with TWRP as the custom recovery. How to get my m8 back to stock. like 100% stock. I want to be able to accept updates from att and have no trouble doing so. SO FAR i tried flashing a recovery image that i found.
I am not able to post links yet but it was the stock recovery firmware base version 1.12.502.18 for ATT from the website andromods which i read is the correct one.
I flashed the recovery image there^^^ and got the red triangle with the ! in it, then my phone restarted about 2 mins later and went back to the rooted sense 6 overlay i had but i still have TWRP on it. I thought i had bricked my phone at this point but it restarted.
So, how can I completely get rid of TWRP? I have a fastboot program already installed.
View 3 Replies
View Related
Apr 22, 2015
Just got my SM-920F
First I tried to flash CF-Autoroot with odin v3.10.6 - after odin passed, the phone rebooted and got stuck on "powered by android" screen
I got the stock firmware (G920FXXU1AOBN) downloaded and flashed with odin.. the phone comes to life...
I try to flash twrp. ... same story
What can be the cause of this ? Can't root or get custom recovery
Should I do the OTA update maybe and try ?
View 2 Replies
View Related
Feb 13, 2016
I just got my second hand Nexus 6p and the bootloader came unlocked and TWRP is installed. The updates don't work when TWRP is installed so I want to go back to the stock recovery.
Build number: MMB29P
Android 6.0.1
January 2016 patch.
View 7 Replies
View Related
Nov 5, 2015
I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed..
View 10 Replies
View Related
Jul 28, 2015
I have never rooted my phone nor have I flashed a custom ROM before. I have a 32 GB HTC One M9 from Verizon on stock Lollipop Android, and it has been working perfectly until this morning. I woke up to my M9 stuck in a bootloop. It would boot to the HTC logo, stay there for about 10 sec, then go black and constantly restart again (even as I type this). I can access the bootloader, but it seems none of the options work for me! I can't boot to recovery mode or even power off my phone. It just constantly boots again by itself.
View 3 Replies
View Related
Dec 18, 2015
I have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 1 Replies
View Related
Feb 17, 2016
I tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies
View Related
Dec 18, 2015
I have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies
View Related
Nov 8, 2015
On Chainfire's thread there is a link to a boot image for the MDB08K build of our phones, but nothing else. I personally have build number MDB08L and when I tried rooting the phone and flashing TWRP, I became stuck in a bootloop that I was eventually able to recover from. That was using the stock boot image for the MDB08L build number from Google's site.
My question simply is, how can we root any version other than the MDB08K build because we don't have a modified boot image of any other build.
View 4 Replies
View Related
