Galaxy S6 :: How To Get Rid Of ROM Boot Image - Odin Flashing Of Stock Firmware Doesn't Do It
Feb 22, 2016
SM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
View 1 Replies
ADVERTISEMENT
May 5, 2015
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies
View Related
Aug 18, 2012
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies
View Related
May 1, 2015
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
View 10 Replies
View Related
Sep 7, 2015
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
It's a SM-G920I
View 10 Replies
View Related
Aug 1, 2015
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
View 9 Replies
View Related
Apr 21, 2011
I received my shiny new 3G Xoom (MZ601) yesterday and decided to root it. I successfully unlocked the bootloader and then flashed the rootboot.img file. Unfortunately on rebooting it hung at the Motorola logo. I tried a couple of other boot images, such as Tiamat 1.3.1 and ocboot but all with the same result. Obviously something is different about the European 3G Xoom which makes these US boot images fail.
I managed to "sort of" recover using one of the stock US boot images (can't remember which one!) but my Wi-Fi and Bluetooth are no longer working. What I would really like to do is revert to a completely stock MZ601 image. I see that the Verizon stock images are available on motodev but no mention of MZ601.
View 8 Replies
View Related
Jul 31, 2015
I had on my nexus 5 custom recovery, custom kernel (franco) and paranoid android rom (rooted). I wanted to get back to stock and flashed factory image lollipop 5.1 doint this
adb devices
adb reboot bootloader
fastboot flash bootloader <bootloader-filename>.img
fastboot flash radio <radio-fileame>.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot reboot
When i rebooted i noticed that everything was fine but i had paranoid android rather than stock rom! What happened?
View 2 Replies
View Related
Jun 23, 2015
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
View 2 Replies
View Related
Aug 8, 2015
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
View 2 Replies
View Related
Jul 20, 2015
I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
View 2 Replies
View Related
Jul 6, 2015
I see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies
View Related
Sep 24, 2015
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
View 2 Replies
View Related
Aug 8, 2015
Can i delete Cyanogenmod with installing stock rom with odin download? so will the recovery uninstall with the cyanogenmod?
View 1 Replies
View Related
Nov 27, 2015
Some reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies
View Related
Nov 18, 2015
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies
View Related
Jan 24, 2013
Today i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
View 3 Replies
View Related
May 12, 2015
As the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
View 1 Replies
View Related
Jul 27, 2015
I rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies
View Related
Feb 12, 2016
I'm about to fully flash my device back to stock. I have a o2 UK variant s6. I have downloaded the correct 5.1.1 rom via sammobile. However the worry I have is about the bootloader, do I have to do anything with it.
View 3 Replies
View Related
Dec 25, 2015
I had flash TWRP via odin couple times but nothing, it again boot into stock recovery?
View 1 Replies
View Related
Aug 16, 2015
I had so many problems in the last days. I flashed the first INU 5.1.1 version on my G920I, after a few problems flashing TWRP. Finally I got the phone working and no major problems until last days when battery started to malfunction.
Anyway, after that I tried to flash the latest INU 5.1.1 version (G925IDVU2COGA_G925IODD2COGA_G925IDVU2COGA_HOME.ta r) but the phone couldn't start the Odin process. Then I tried another roms but nothing (all of them 5.1.1) after that I flashed the TWRP and made a stupid "factory wipe" and then my device was soft bricked.
The phone was on boot loop.. Finally, I splitted COGA rom in parts (modem.bin, cache, etc) and flashed system separated from the rest ROM. This worked but the only file that wasn't possible to load was sboot.bin cm.bin. Anyway, after that I tried to reflash COGA in one part but nothing. Finally I used the COF room (INU 5.1.1 from sammobile) and it was flashed full with no problems via Odin but now my device has the TOUCH SENSOR INVERSED. when I type in the right the letters on the left side of the keyboard are pressed.
By now I don't know what to do. Except that I am trying to flash a modded stock rom to get things fixed .
View 3 Replies
View Related
Dec 7, 2015
1. I have knox tripped
2. When i flash stock with smart switch i get stuck on samsung boot logo
3. Same thing with odin....stuck on samsung boot logo
4. To get the phone working and boot to desktop i flash custom kernel like unikernel
5. The problem is i want to use stock kernel i want to flash with smart switch and i want to get updates from samsung like i was before because when i use unikernel and i try to updates phone said your rom is modified...
Is there any chance to bypass samsung logo without flashing custom kernel...
View 1 Replies
View Related
Feb 4, 2016
I have a SM-G920F phone and I recently flashed the UK version of Lollipop to be able to participate in Marshmallow beta program. I didn't like it because it didn't support my gear VR and I went back to Lollipop. Now I have the UK version installed on my phone and I can't get rid of the Android 6.0 beta OTA software update notification.
So I would like to flash the Nordic countries firmware but my pc is broken and I don't have admin permissions for my pc at work. It there a way to flash it without a pc?
View 3 Replies
View Related
Oct 7, 2015
My last Samsung phone was a note 3, 2 years ago. After that I went through some other non Samsung phones so I wanted to check if this was still the same:
I had bought it through my carrier and then downloaded and flashed the factory unlocked firmware via odin to remove carrier bloat.
Does this still work?
View 4 Replies
View Related
Dec 18, 2011
first off is my problem with ics which i installed the other day after watching a "how to install" video on Internet. got it installed and working fine but as you may or may not know its not official update so there was alot of issues like the phone would turn itself off and other annoying things.now i want it back to stock (not bothered about the orange bloatware that was on it). i am new to all this flashing/installing.
View 9 Replies
View Related
Dec 5, 2015
Galaxy S6 SM-G920V firmware G920VVRU3BOG5 (5.1.1)
When I'm trying to power on the phone, I get the initial black and white "Samsung Galaxy S6" screen. Then everything goes black and the blue LED on the top left lights up and stays on, does not flash or dim, just stays on. The phone does not vibrate or make any sound when it does this.
What I've tried to fix it:
1) Power + Volume down (maintenance boot mode) ... I've tried normal boot, factory reset and booting in safe mode, all just give me a black screen with the blue LED.
2) Power + Volume Up + Home (andoid system recovery screen) ... When doing this, the phone displays the black and white "Samsung Galaxy S6" screen, followed by a bluish colored screen with a little android guy on it, followed by the dead android guy with a yellow exclamation triangle over his head, then goes into the android system recovery menu. On this screen I can wipe data/factory reset and wipe cache partition and reboot and I still get a black screen with a steady blue LED.
3) Power + Volume Down + Home followed by Volume Up (Downloading screen) ... Takes me to the bluish screen warning me about downloading a custom OS. After hitting up it does not show the knox has ever been triggered. I've tried using ODIN 3.10.6 to reinstall fresh firmware (5.1.1 G920VVRU3BOG5) and after it successfully installs it, it boots to a black screen with the steady blue LED.
View 1 Replies
View Related
Oct 7, 2011
Link me a guide to do a full firmware upgrade via flashing?
View 4 Replies
View Related
May 24, 2015
As my phone is rooted, I can't update phone through OTA.
There just came a new firmware on Sammobile (May 21) and I downloaded it. If I flash it, will my phone be wiped?
Also, if it do. Is there anything "to do" so I can get everything with it?
View 2 Replies
View Related
Aug 3, 2011
I have tried several times to flash to KG6 (I think it is) 2.3.4Every time it will show I have android version 2.3.3So can a 3 UK locked phone stop me flashing the firmware of choice?
View 9 Replies
View Related
Sep 26, 2015
I flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
View 6 Replies
View Related
