I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies View RelatedAnyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
It's a SM-G920I
I have tried to flash stock firmware a few weeks ago but got the same problem. Now I am trying to flash engineering bootloader exactly the same problem.the problem is; every time I want to flash something with odin it fails after nand write start and then i get this weird thing on my screen.and yes after this fail i can still use my phone and other things.
View 5 Replies View RelatedI tried flashing the newest firmware that came a few days ago.
Quote:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
and after 5-10 minutes, I just take the USB out and boot it up normally, because nothing happens.I'm in download mode, USB debugging is enabled, original cable, Odin v3.09, tried using different usb ports, odin is started as administrator.
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies View RelatedI'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
I see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies View RelatedSM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
As the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
View 1 Replies View RelatedI flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
Some reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies View RelatedIt says downloading do not turn off target. tried everything else to restart, all 3 buttons as indicated and still will not work.
View 1 Replies View RelatedI am stuck on boot screen.. I went into download mode but I keep getting stuck on Setup Connection when I try to flash the stock rom.
View 2 Replies View RelatedI flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
I have galaxy s6 G920F and I can't return to stock ROM, if I flash via Odin android 5.1.1, it says successful then stops on boot screen. I also did factory rest after installing also cleared cache but nothing happens. I tried France stock ROM 5.1.1 XEF I guess also UK BTE but I got same results.. but I can install custom ROM and it works fine but I need to return my phone but can't until it's on stock ROM.
It also says dm-verity verification failed. I just need to boot with stock ROM other error or warning messages don't matter..
I have a galaxy s6 g920f and i recently updated it to 5.1.1 via odin wih build number bofj;I'm not liking the firmware as it cant be rooted via pingpong so i tried cf auto root but it stuck on the boot screen so is there anyway to root it? Or can I downgrade to 5.0.2 back and i have seen some guys who reset the knox counter (which is shown in the bootloader) so I have got knox 01 (00500) is there anyway I can get it back to zero?
View 1 Replies View RelatedI just bought a S6 to use Samsung Pay.
Received it today, fist thing I had to do was update it from 5.0.2. So I used the OTA update from t-mobile option (as it offered it as soon as I turned the phone on and connected to Wifi).
I click the "Restart and apply update" when it had finished downloading, set the phone down, browse the internet for a little and notice it was hanging on the Samsung logo.
I try to turn it off and on, nothing works. I try entering recovery mode, won't let me.So I then download and try manually flashing 5.1.1 through ODIN.
Everything says "PASS" in ODIN, it reboots and gets to the Samsung logo, shows the android robot, says "installing updates" but when the bar reaches about 45% it switches to "erasing" then goes back to getting stuck on the Samsung Logo.
What can I do ? I really don't want to trip knox as Pay is the sole reason I bought this stupid phone, all other Stock ROMS now fail odin and G920TUVU3DOI1_G920TTMB3DOI1_G920TUVU3DOI1_HOME.tar is just doing the Install then erase thing.
I purchased an S6 off of CL yesterday, was able to use it all evening and set it up via Wifi (purchased it after Verizon stores were closed, so have not been able to get a SIM card or get it activated with service). Everything was working perfectly.
This morning it asked to update, I accepted. Ever since the update when booting it is stuck on the red verizon screen. I have tried clearing the cache and doing a factory reset, no changes.
I have a G920I that I just rooted with Odin. After that I installed TWRP manager and used it to install TWRP recovery. On reboot i am stuck at the black and white powered by android screen. I can reboot the phone with the volume down and power button combo but i cannot get it to boot into download mode using volume up+home+power buttons.
View 2 Replies View Relatedmy phone is stuck on the boot screen right now for over than 20 minutes, all i did is that i activated knox security settings and the phone asked to reboot and its stuck now, i've rooted the phone before using pingpong but then i deleted the root from super su itself, i don't understand anything i attached photos for the phone stuck on the boot screen, in the recovery mode and download mode too.
View 6 Replies View RelatedI am currently on axism rom which is lollipop 5.0.2 and i wanted to go to 'xtrestolite deo-dexed rom' which is lollipop 5.1.1 and noticed i needed to flash bootloader and modem for 5.1.1 so i did this using odin and now it will not boot i now realize that it says this will not work with a stock kernel which I am guessing the axism rom has so ...
View 8 Replies View RelatedI just tryed updating to lollipop on my stock s5 and now it stuck in a boot loop is there anyway I could save my pictures on my device or get it out of this loop?
View 3 Replies View RelatedI wanted to root my galaxy s2, i followed the instructions up till the point where i flash with odin with an insecure kernel, after reboot , the phone is now stuck on the samsung boot screen.I cant even boot into recovery modem.
View 9 Replies View RelatedI have not used my phone in any wrong way. I did not install a custom rom or anything. no root. randomly in my every day normal usage of my phone, it started to restart. and the the problem got worse and worse. for a few minutes, i will be able to use my phone but then my phone will restart and be stuck restarting. most of the times I can't even go into recovery mode. It restarts again when i get to that. I already resetted my phone, and I wiped the partition.
I have a samsung galaxy s6 SM-G920W8 telus/koodo 32 gb. i got the battery replaced by samsung but that didnt work. i noticed that after a few hours, my phone stops restarting when it reaches to 10% battery life.
my phone has been playing up and generally malfunctioning lately. It seems to work fine for a day or so before freezing, and either rebooting itself or forcing me to manually reboot it using power + volume down. This seems to send it into a bootloop where it generally freezes during the Samsung animation with the pulsing squares. This sequence continues with me manually rebooting, also trying to boot to safe mode and to recovery and after various attempts, i successfully got into recovery without it freezing on the blue android.
I then decided to factory reset as a last option, having looked around on forums for solutions. However, I now do not know what to do as it seems to have frozen during the factory reset. I dont have screenshots but the script reads as follows :
dm-verity verification failed. . .
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
Okay I have the sm-G920P, and I used cf autoroot to root, I then installed twrp and the renegade rom. I also installed the unikernel kernel
The phone will start, display splash, Go to the "android is starting" screen, sometimes lets me choose wifi network, sometimes reboots at this point, the farthest I ever get is where it says we are preparing your services, this may take 3-4 mins. But I can never get through it all the way because the device keeps rebooting itself.
I tried flashing back the stock files from sammobile to no avail, I also went to the best buy store and had the samsung guys flash it 2x .... no luck...
I knew I shouldnt have attempted to root this phone.. Where I can find a PIT file for this model?
So i have a sprint s6 with 5.1.1 OBE. I have flashed a kernel for root. I found a video online to make RAM more managable and it had to do with earasing some data in the files and reboot. Now my phone is stuck on a boot loop and goes into the "Sprint spark" screen for like 5 min and restarts. Rocovery mode does not work but download mode does. I was thinking of trying to update with smart switch since there is a small update or maybe re flashing the kernel but i dont think that work and the stock roms for OFE arnt online yet.
View 1 Replies View RelatedI have never rooted my phone nor have I flashed a custom ROM before. I have a 32 GB HTC One M9 from Verizon on stock Lollipop Android, and it has been working perfectly until this morning. I woke up to my M9 stuck in a bootloop. It would boot to the HTC logo, stay there for about 10 sec, then go black and constantly restart again (even as I type this). I can access the bootloader, but it seems none of the options work for me! I can't boot to recovery mode or even power off my phone. It just constantly boots again by itself.
View 3 Replies View RelatedLike others, I tried the software update, and then my phone constantly got stuck at the four little circles at start up. I followed some instructions I found on AndroidPit:
1. From a powered off state, press the Power button to start your Nexus 5. When you see the Google logo press and hold the Volume Down key and release when the device vibrates.
2. Use the volume keys to highlight Recovery Menu and press the Power button to select. This will bring you to a screen with an Android on its back.
3. Hold the Volume Up key for 5 secs then release and a new menu will appear.
4. First off, you can use the volume keys to select Wipe Cache Partition. This will cause your phone to restart. once this is done, re-do the previous steps to get back to the same screen (the one that Wipe Cache Partition was on).
5. Highlight Wipe Data/Factory Reset and select using the Power key. Scroll down to Yes, Delete All Data and press the Power button again to select.
6. Your Nexus 5 will now wipe your data and reformat.
7. On the next screen hit the Power button to select Reboot System Now.
It has been 40 minutes now and it's stuck on 'Formatting /data'. Is this normal?
I've only had this phone for a couple of months and it was functioning perfectly until now I haven't rooted it or anything.
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
