Galaxy S6 :: Stuck On Boot - Can't Flash Stock Firmware
Sep 7, 2015
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
It's a SM-G920I
View 10 Replies
ADVERTISEMENT
Aug 18, 2012
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies
View Related
Feb 22, 2016
SM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
View 1 Replies
View Related
Sep 24, 2015
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
View 2 Replies
View Related
Feb 12, 2010
I'm still stuck with the stock firmware, ie 021.024... nothing shows up either on the phone or via NSU.Am I alone in this situation?
View 6 Replies
View Related
Jun 5, 2015
I am stuck on boot screen.. I went into download mode but I keep getting stuck on Setup Connection when I try to flash the stock rom.
View 2 Replies
View Related
Dec 25, 2015
I had flash TWRP via odin couple times but nothing, it again boot into stock recovery?
View 1 Replies
View Related
Jul 13, 2015
Been trying to flash Gaakxy s6 back to stock for hours. I get this message in ODIN
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2POFC_G920FVFG2BOF2_G920FXXU2POFC_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] ....
Do i need to flash pit to the phone?
View 3 Replies
View Related
Jun 14, 2015
Is it possible too flash stock android on s6 and then any link to roms I can play and have done a couple things but trying get resources.
View 2 Replies
View Related
Jul 21, 2015
I root my S6 without trigering knox. But I know if I install custom recovery that will triger knox. So is it possible to install custom rom with stock recovery? Do I have to rename rom zip file as update.zip? Will that triger knox?
I am on 5.0.2 not 5.1.1 yet.
View 4 Replies
View Related
Feb 4, 2016
I have a SM-G920F phone and I recently flashed the UK version of Lollipop to be able to participate in Marshmallow beta program. I didn't like it because it didn't support my gear VR and I went back to Lollipop. Now I have the UK version installed on my phone and I can't get rid of the Android 6.0 beta OTA software update notification.
So I would like to flash the Nordic countries firmware but my pc is broken and I don't have admin permissions for my pc at work. It there a way to flash it without a pc?
View 3 Replies
View Related
Jun 13, 2015
I flashed to 5.1.1 T-Mobile when it came out, then learned it was a leak and wasn't ready for release yet. Unsurprisingly I'm having issues with System crashing, etc. I tried to flash back to 5.0.2 and I end up in a bootloop.
I'm stuck! The only ROM that seems to work now is 5.1.1, all others get me stuck in a bootloop in which I must use TWRP to flash back to 5.1.1. How to be able to go back to a stable 5.0.2!
View 2 Replies
View Related
Dec 18, 2011
first off is my problem with ics which i installed the other day after watching a "how to install" video on Internet. got it installed and working fine but as you may or may not know its not official update so there was alot of issues like the phone would turn itself off and other annoying things.now i want it back to stock (not bothered about the orange bloatware that was on it). i am new to all this flashing/installing.
View 9 Replies
View Related
Jul 6, 2015
I see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies
View Related
Jun 1, 2015
How can i flash a stock rom on a Live Demo Unit S6 Edge. Is there any way to get rid of that Retail Mode ?
I like to use this Phone like a Tablet so wifi is okay i just need to get rid of this retail mode. I now there are many Threads here but i just want a yes or a no.
Is it possible to flash a stock rom ? Is there any way to delete the Retail Mode ? Are there allready custom roms ?
View 3 Replies
View Related
Sep 26, 2015
I flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
View 6 Replies
View Related
May 5, 2015
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies
View Related
Nov 27, 2015
Some reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies
View Related
Jun 7, 2015
I want to flash to G920FXXU1AOD4 from G920FXXU1AOE3. I tried to use Odin 1.85 and 3.04.
This is the error that I'm getting in Odin 1.85:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOD4_G920FOJK1AOD4_G920FXXU1AOCZ_HOME.tar .md5 is valid.
[Code] ....
Why can't I flash to this firmware?
View 6 Replies
View Related
May 19, 2015
How can I flash firmware using Smart Switch?
View 2 Replies
View Related
Nov 18, 2015
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies
View Related
Oct 18, 2015
I am on the latest firmware BOI1 and i decided to root my sprint s6 the other day to try and do a sim unlock. so i am trying now to return it to stock. i downloaded the correct firmware and used the latest odin3(i believe it is the latest) and the md5 check would do good but when i tried to flash the actual firmware it kept hanging on "setupConnection" and fails
Wiped cache and factory reset from recovery. It has hung at getting pit now the last couple times. I re downloaded the firmware directly from sammobile website this time.
View 1 Replies
View Related
Aug 2, 2015
I have galaxy s6 G920F and I can't return to stock ROM, if I flash via Odin android 5.1.1, it says successful then stops on boot screen. I also did factory rest after installing also cleared cache but nothing happens. I tried France stock ROM 5.1.1 XEF I guess also UK BTE but I got same results.. but I can install custom ROM and it works fine but I need to return my phone but can't until it's on stock ROM.
It also says dm-verity verification failed. I just need to boot with stock ROM other error or warning messages don't matter..
View 7 Replies
View Related
Jul 27, 2015
I have a galaxy s6 g920f and i recently updated it to 5.1.1 via odin wih build number bofj;I'm not liking the firmware as it cant be rooted via pingpong so i tried cf auto root but it stuck on the boot screen so is there anyway to root it? Or can I downgrade to 5.0.2 back and i have seen some guys who reset the knox counter (which is shown in the bootloader) so I have got knox 01 (00500) is there anyway I can get it back to zero?
View 1 Replies
View Related
Nov 2, 2015
My s5's stock music app keeps on crashing when trying to go to other section and I am stuck at playlists. I tried to clear data but it didnt work. Can it be fixed without factory reset?
Current android version : latest 4.4.2 build
View 3 Replies
View Related
Dec 7, 2015
1. I have knox tripped
2. When i flash stock with smart switch i get stuck on samsung boot logo
3. Same thing with odin....stuck on samsung boot logo
4. To get the phone working and boot to desktop i flash custom kernel like unikernel
5. The problem is i want to use stock kernel i want to flash with smart switch and i want to get updates from samsung like i was before because when i use unikernel and i try to updates phone said your rom is modified...
Is there any chance to bypass samsung logo without flashing custom kernel...
View 1 Replies
View Related
Oct 14, 2015
I just bought a S6 to use Samsung Pay.
Received it today, fist thing I had to do was update it from 5.0.2. So I used the OTA update from t-mobile option (as it offered it as soon as I turned the phone on and connected to Wifi).
I click the "Restart and apply update" when it had finished downloading, set the phone down, browse the internet for a little and notice it was hanging on the Samsung logo.
I try to turn it off and on, nothing works. I try entering recovery mode, won't let me.So I then download and try manually flashing 5.1.1 through ODIN.
Everything says "PASS" in ODIN, it reboots and gets to the Samsung logo, shows the android robot, says "installing updates" but when the bar reaches about 45% it switches to "erasing" then goes back to getting stuck on the Samsung Logo.
What can I do ? I really don't want to trip knox as Pay is the sole reason I bought this stupid phone, all other Stock ROMS now fail odin and G920TUVU3DOI1_G920TTMB3DOI1_G920TUVU3DOI1_HOME.tar is just doing the Install then erase thing.
View 4 Replies
View Related
Jun 26, 2015
I purchased an S6 off of CL yesterday, was able to use it all evening and set it up via Wifi (purchased it after Verizon stores were closed, so have not been able to get a SIM card or get it activated with service). Everything was working perfectly.
This morning it asked to update, I accepted. Ever since the update when booting it is stuck on the red verizon screen. I have tried clearing the cache and doing a factory reset, no changes.
View 6 Replies
View Related
Apr 19, 2015
I have a G920I that I just rooted with Odin. After that I installed TWRP manager and used it to install TWRP recovery. On reboot i am stuck at the black and white powered by android screen. I can reboot the phone with the volume down and power button combo but i cannot get it to boot into download mode using volume up+home+power buttons.
View 2 Replies
View Related
May 25, 2015
my phone is stuck on the boot screen right now for over than 20 minutes, all i did is that i activated knox security settings and the phone asked to reboot and its stuck now, i've rooted the phone before using pingpong but then i deleted the root from super su itself, i don't understand anything i attached photos for the phone stuck on the boot screen, in the recovery mode and download mode too.
View 6 Replies
View Related
Sep 13, 2015
I am currently on axism rom which is lollipop 5.0.2 and i wanted to go to 'xtrestolite deo-dexed rom' which is lollipop 5.1.1 and noticed i needed to flash bootloader and modem for 5.1.1 so i did this using odin and now it will not boot i now realize that it says this will not work with a stock kernel which I am guessing the axism rom has so ...
View 8 Replies
View Related
