I flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
I recently flashed xef 5.1.1 and ota'd to 6.0.1 and rooted with spacex kernel. My question is can i install twrp with flashify?
First of all root with spacex kernel.... Then follow the guide on how to root galaxy s6 android 6 in this forum and don't do the last part with installing the kernal and super su. Link to guide: [URL] ....
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
I'm new to the Samsung S6. Just brought a second hand S6 edge from eBay, and how to flash twrp recovery to the phone. It's been a while since I flashed a Samsung phone unsure on the process on how do it. I'm not really worried about tripping know....
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005).. File analysis.. SetupConnection.. Initialzation.. Get PIT for mapping.. Firmware update start.. SingleDownload. sboot.bin NAND Write Start!! FAIL!
I was trying to install a ROM and things got a bit messed up. I wiped system/cache/dalvik/data via TWRP. I then went to install the ROM but it failed due to only supporting hhz12h bootloader.
So now I'm kind of stuck. I can't update the bootloader because fastboot/ADB won't list the device in TWRP. Is there any way to launch an ADB server in TWRP so I can fastboot the bootloader? Doesn't look like there is.
If there's not: Is there a TWRP zip-install hhz12h bootloader I can use? Looked around, couldn't find one.
If not I'll have to try and find/flash the original image..but fastboot is not going to happen so I have to find a zip installable one that'll work with hhz12d bootloader...which hopefully is around. Otherwise I could install literally anything just to get an ADB server so I can fastboot the hhz12h bootloader in there.
I used adb to install TWRP onto my Nexus 5. Now it is in a bootloop, and TWRP does not seem to be able to mount anything. When it reboots it looks like it automatically goes to the TWRP where it says it is running OpenRecoveryScript but it is unable to mount anything. I tried a boot start to Recovery and it worked but when i tried a factory reset it says the same thing.
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
After manually flashing files to upgrade to 6.0.1, I flashed TWRP 2.8.7.0. But I am not able to flash supersu from sdcard because when I browse to the folder, it looks empty. Why this is happening?
So I updated to Marshmallow from Lollipop via fastboot on my Mac. Upon installing SuperSU and rebooting, I got stuck on the boot animation. Cache wipe and factory reset - still no go, and after the factory reset, I lost TWRP. I tried installing it again only to receive a black screen when rebooting into recovery mode. Tried another factory reset and reinstalled Marshmallow - same issue. I have contacted Google and there's nothing they can do.
Fastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
As the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
The flash works fine with the camera but doesn't work with any other app using the flash like flashlight or heart rate monitor. I tried downloading different apps or deleting the app and reinstalling rebooting the phone each time but the problem persists. Any suggestions? I upgraded to 5.1.1. The same
Iknow how to flash. I do fastboot oem unlock, then I have unlocked LG, but when i flash the ROM it restarts, and adb cant flash the ROM because after reboot the device is locked again.
I can't login to ROM, its bricked so i can use only adb... cant wipe cache and partition , cant reset to factory -
Yessterday my Nexus 5 battery drained out and instead of shutting down, it tried to restart and got stuck in the startup sequence with the dots floating on the screen. I went into bootloader mode and then into recovery mode where I saw the cache errors.
E: failed to mount /cache (invalid argument)
I started to read a bit more on fixing the issue and the first solution was to flash it with the stock cache.img. However, when I unlock the OEM using fastboot oem unlock and reboot the boot-loader, it is going back to the locked state. I'm not sure if I'm going wrong somewhere but I haven't been able to flash my phone yet with the stock rom.
Do I need to backup data in order to be able to revert back to my stock Rom? My understanding is that if I did a backup of the System, Boot, EFS, and Cache then I should be fine. Only gripe is that my Apps and app data will be lost. Is that correct?
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
i have a problem with battery drain the phone is emty after a half day. im on AOE3 firmware version.i remember reading somewhere the this is because of flashing twrp? and needing to flash stock recovery.My question is is this true? and where can i find the AOE3 stock recovery?
I am currently on 5.1.1 stock with rooted and twrp installed. After flashing 6.0.1 official ROM via Odin will I retain ROOT and TWRP? If not then how can i get rooted and twrp installed?
I Just reflashed my N900 to RX-51_2009SE_10.2010.19-1.203.1_PR_COMBINED_203_ARM and wanted to clear it completely by flashing RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM Though the first 1 flashes just fine, but the vanilla file wont flash. I entered this command flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_ MR0_ ARM.bin -f -R. It detects the device, then it says "booting device into flash mode" But then nothing happens anymore, phone does not show usb icon anymore And i just see flasher v2.5.2 <sep 24 2009> Image 'mmc', size 255947 kB version RX-51_2009SE _10.2010.13-2.VANILLA USB device found found at bus bus-0, device address \.libusb0-0001--0x0421-0x0105. Found device RX-51, hardware revision 2101 NOLO version 1.4.14 Version of 'sw-release': RX-51_2008SE _10.2010.19-1.203.1_PR_203 Booting device into flash mode Suitable USB device not found, waiting. Can anybody explain me why it wont do this? EDIT: Tried a few times to start over. Sometimes it reboots, and i see the low power mode 5fots moving. Then after a few seconds, it freezes on the 2nd dot.
Trying to root my Galaxy s6 SM-G920I India version but no luck. Had to restore stock firmware thrice today. Every time I used ODIN 3.10.6 with Unibase or Unikernal it would say kernel is not SEAndroid enforcing and stick to a bootloop. If I use the CF auto root method it says Recovery is not SEAndroid enforcing and again bootloop.
I tried rooting my Galaxy S5 SM-G900T and after the root process with Odin and TWRP in the last step when I rebooted the phone it got stuck on a boot loop in the Samsung logo, so I had no choice but to do a Factory reset which even the OS got deleted in the process. I'm downloading the 5.1.1 firmware for my phone on my computer but I have questions on how to install it on my phone now, because obviously PC is not recognizing my phone or it is not letting me access the storage or sd card once connected. I have Kies 3 in my pc and TWRP on the phone. Which way can I install the firmware on my phone again?
For the past 6 hours I've been trying to unbrick my Samsung Galaxy S6 Edge (G925-W8). I accidentally cleared all the files/ caches with TWRP, now I do not have any OS on it.
Things I've done: Used Odin to flash a md5 file or a rom I keep getting an error
I'm so lost, I just got the phone yesterday as well too...
