Do I need to backup data in order to be able to revert back to my stock Rom? My understanding is that if I did a backup of the System, Boot, EFS, and Cache then I should be fine. Only gripe is that my Apps and app data will be lost. Is that correct?
.. just bought s6 today very happy .... transferred my whatsapp folder from old fone to this one but when started whatsapp .. it started without verifying which is good but it didnt restored my earlier chats
i have followed all the steps using NRT to unlock boot-loader and root the phone.
Installed TWRT manager and flashed the recovery.
Now i am trying to flash CM12 for the first time and stuck with error message "can't install this package on top of incompatible data" during flashing .
downloaded the following flash zip from CM website: cm-12.1-20150901-SNAPSHOT-YOG4PAO237-hammerhead.zip (281.77 MB)
I'll be updating to 5.1.1 later and wondered what the best way to restore my S6 (SM-G920F). I'll be backing up different ways where each backup does it slightly differently.
I have
1. Samsung backup set up via the backup/restore options
2. Google sync via accounts and backup via backup/restore options
3. Helium backup "carbon" folder copied to my PC
Which is the best to restore from? Is there a certain order i should do it? Can i ignore any of the options listed above? I only ask this as Helium is denied backup to certain apps e.g. WhatsApp etc.
I have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
So I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
i have a problem with battery drain the phone is emty after a half day. im on AOE3 firmware version.i remember reading somewhere the this is because of flashing twrp? and needing to flash stock recovery.My question is is this true? and where can i find the AOE3 stock recovery?
I am currently on 5.1.1 stock with rooted and twrp installed. After flashing 6.0.1 official ROM via Odin will I retain ROOT and TWRP? If not then how can i get rooted and twrp installed?
I recently flashed xef 5.1.1 and ota'd to 6.0.1 and rooted with spacex kernel. My question is can i install twrp with flashify?
First of all root with spacex kernel.... Then follow the guide on how to root galaxy s6 android 6 in this forum and don't do the last part with installing the kernal and super su. Link to guide: [URL] ....
Trying to root my Galaxy s6 SM-G920I India version but no luck. Had to restore stock firmware thrice today. Every time I used ODIN 3.10.6 with Unibase or Unikernal it would say kernel is not SEAndroid enforcing and stick to a bootloop. If I use the CF auto root method it says Recovery is not SEAndroid enforcing and again bootloop.
I tried rooting my Galaxy S5 SM-G900T and after the root process with Odin and TWRP in the last step when I rebooted the phone it got stuck on a boot loop in the Samsung logo, so I had no choice but to do a Factory reset which even the OS got deleted in the process. I'm downloading the 5.1.1 firmware for my phone on my computer but I have questions on how to install it on my phone now, because obviously PC is not recognizing my phone or it is not letting me access the storage or sd card once connected. I have Kies 3 in my pc and TWRP on the phone. Which way can I install the firmware on my phone again?
For the past 6 hours I've been trying to unbrick my Samsung Galaxy S6 Edge (G925-W8). I accidentally cleared all the files/ caches with TWRP, now I do not have any OS on it.
Things I've done: Used Odin to flash a md5 file or a rom I keep getting an error
I'm so lost, I just got the phone yesterday as well too...
I'm new to the Samsung S6. Just brought a second hand S6 edge from eBay, and how to flash twrp recovery to the phone. It's been a while since I flashed a Samsung phone unsure on the process on how do it. I'm not really worried about tripping know....
I have not secured my taken pictures to OneDrive / Dropbox, but I thought a single TWRP backup (on a USB OTG) would be enough.
I was using Edgar28's XtreStoLite 2.1, and wanted to put 2.2 on the S6. I knew v2.2 needed a new bootloader and modem to be loaded in ODIN, so I did.
Before I did that, I made the TWRP backup on the usb stick, so if anything would happen I could go back.
Well, as I usually did with my Note 4 when installing a new ROM, I completely wiped everything except for the microSD card and the USB OTG.
But at that point I forgot the S6 doesn't use the microSD so I would probably be lost of all the photo's (yes because I also forgot to set up OneDrive).
Then I realised I had to go back because I forgot about my photo's. So I put back the modem and boatloader for XtreStoLite 2.1 and loaded the TWRP backup in the restore.
I hoped it'd start right up, but it does not. It comes in a bootloop, even before the animated samsung logo.
So then I tried installing XtreStoLite 2.1 without a wipe, and the system started but I couldn't see my photo's, the were gone.
Then I loaded the original firmware via odin over the backup, and I did see the photo's, but they were all grayed out. Like they were there but you wouldn't be able to see them.
What can I do to restore the photo's from the TWRP backup?
I flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
I have a G920F. It is rooted via odin flashing Unikernel. When I tried to flash TWRP via TWRP Manager (installed from the playstore), the phone would get into a bootloop. It got stuck at the Galaxy S6 screen, with the red line up on the top left corner saying "Recovery Seandroid not enforcing" or something like that. I had to use KIES to get it back up and running (no data loss). Now I rooted it again, and root was successful. I want to get TWRP flashed in order to install the custom ROMS. How do I do that now? I don't want to have to use KIES to recover my phone again. It is running 5.1.1 btw.
I reflashed all the factory images to my Nexus 6P (except userdata), and then restored a TWRP backup of the data partition. This worked, my phone boots up and obviously has my installed apps, etc. But... on the Nexus 6P when you restart the phone you have to enter your lock pattern or PIN. My phone was previously configured with a pattern. It seems the TWRP data backup didn't backup the lock pattern, because it doesn't recognize my pattern.
My fingerprint is recognized, but on the Nexus 6P you still have to enter the lock pattern or PIN when you first reboot. So, I have no way to get into the phone. I tried setting a new lock screen password with Android Device Manager, but it doesn't work. I still get the screen asking for the lock pattern. Is there any way I can get into my phone without blowing away all the data?
I rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
I have a torch 9800 and Curve 8900 and over time I have created backups on my PC. I now need to give the PC back and am unable to remove the backups.
When I try and delete the .ipd files it says "you need permission of administrator to make these changes." I am using Windows 7 and to my knowledge have full administration.