i tried to install another ROM and made some kind of big mistake
I deleted the whole system what was quiete dumb i think...
(I had stock kernel, then rooted is via CFroot and then installed TWRP and delete the wrong thinks without having made a backup)
I have not secured my taken pictures to OneDrive / Dropbox, but I thought a single TWRP backup (on a USB OTG) would be enough.
I was using Edgar28's XtreStoLite 2.1, and wanted to put 2.2 on the S6. I knew v2.2 needed a new bootloader and modem to be loaded in ODIN, so I did.
Before I did that, I made the TWRP backup on the usb stick, so if anything would happen I could go back.
Well, as I usually did with my Note 4 when installing a new ROM, I completely wiped everything except for the microSD card and the USB OTG.
But at that point I forgot the S6 doesn't use the microSD so I would probably be lost of all the photo's (yes because I also forgot to set up OneDrive).
Then I realised I had to go back because I forgot about my photo's. So I put back the modem and boatloader for XtreStoLite 2.1 and loaded the TWRP backup in the restore.
I hoped it'd start right up, but it does not. It comes in a bootloop, even before the animated samsung logo.
So then I tried installing XtreStoLite 2.1 without a wipe, and the system started but I couldn't see my photo's, the were gone.
Then I loaded the original firmware via odin over the backup, and I did see the photo's, but they were all grayed out. Like they were there but you wouldn't be able to see them.
What can I do to restore the photo's from the TWRP backup?
I got my phone back and recovered it through a backup from TWRP.
Everything went smooth, besides half my drop-down menu settings are gone.
Attached picture. Missing things like Mobile Data on/off
Attached Thumbnails....
I reflashed all the factory images to my Nexus 6P (except userdata), and then restored a TWRP backup of the data partition. This worked, my phone boots up and obviously has my installed apps, etc. But... on the Nexus 6P when you restart the phone you have to enter your lock pattern or PIN. My phone was previously configured with a pattern. It seems the TWRP data backup didn't backup the lock pattern, because it doesn't recognize my pattern.
My fingerprint is recognized, but on the Nexus 6P you still have to enter the lock pattern or PIN when you first reboot. So, I have no way to get into the phone. I tried setting a new lock screen password with Android Device Manager, but it doesn't work. I still get the screen asking for the lock pattern. Is there any way I can get into my phone without blowing away all the data?
I tried to create a backup with TWRP of PureNexus the 29M build with EX kernel and it has given me an error.
It says 'E:createTarFork() process ended with ERROR=255'
Why can I not create a backup? I really need to back it up!!!!
Using a rooted nexus 5 running stock 4.4.4. And twrp 2.8.x.x ... I want to restore an old twrp backup I had made some time ago (with an earlier version of twrp) and moved to my pc. So I copied that backup from my pc to the twrp folder in the nexus 5. But when I reboot into TWRP, twrp lists other backups, but not the one I just copied back into its folder. How can I get twrp to see and restore that nandroid backup?
View 3 Replies View RelatedI am having trouble finding my nandroid backup file made with TWRP. I can't even find the TWRP directory! This file system is so confusing! I have tried ES File Explorer, Root Browser, and tried searching the file system using my laptop. I have even searched for "2014-12-13" and nothing is found. Nexus 5 on Android 5.0 w/ TWRP v2.8.1.0
View 10 Replies View RelatedI'm running the latest TWRP 3.0.0.0. I noticed when taking a backup, and it asks which partitions I'd like to back up, I notice a couple new ones I've not seen before. System image, vendor image, right below, system, and vendor. I notice the "image" partitions are slightly larger than regular system and vendor. What are these, and should they be included in a regular backup?
View 2 Replies View RelatedI have installed TWRP recovery in order to take a back up from it but it's shows "storage: internal storage (0 MB)" ....
View 3 Replies View RelatedI was restoring a twrp backup and when it reaches "flashing system image" in the restore process it just reboots. Ive tried a few things but cant get it going. It just bootloops.
View 4 Replies View RelatedI deleted the backup file while trying to update to 5.1.1. My phone wouldn't update and I read that I needed to delete the previous backup (bad idea). Well after I updated OS I can't backup to get my previous files and contacts. This is horrible and I am lost at this point on what to do. And I haven't been using iCloud.
Info:
iPhone 4, iOS 5.1.1
A video was inadvertently deleted before the next backup and sync. Can this be retrieved? Would iClould enter in here?
Info:
iPhone 4, iOS 5.1
Do I need to backup data in order to be able to revert back to my stock Rom? My understanding is that if I did a backup of the System, Boot, EFS, and Cache then I should be fine. Only gripe is that my Apps and app data will be lost. Is that correct?
View 1 Replies View RelatedSo, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
View 1 Replies View Relatedi have a problem with battery drain the phone is emty after a half day. im on AOE3 firmware version.i remember reading somewhere the this is because of flashing twrp? and needing to flash stock recovery.My question is is this true? and where can i find the AOE3 stock recovery?
View 4 Replies View RelatedI am currently on 5.1.1 stock with rooted and twrp installed. After flashing 6.0.1 official ROM via Odin will I retain ROOT and TWRP? If not then how can i get rooted and twrp installed?
View 1 Replies View RelatedI got a little problem with my TWRP.
Galaxy S6, Android 5.0.2
TWRP v2.8.7.1
I noticed it when i tried to install the Camera Mod. I tried flashing the zip, using TWRP.
It said, that the flashing was done succesfully, but nothing happened. I also tried it with anothter zip file, but still no change.
The folders which should have been changed doesn't show a change in the last changed dates etc.
I recently flashed xef 5.1.1 and ota'd to 6.0.1 and rooted with spacex kernel. My question is can i install twrp with flashify?
First of all root with spacex kernel.... Then follow the guide on how to root galaxy s6 android 6 in this forum and don't do the last part with installing the kernal and super su. Link to guide: [URL] ....
Trying to root my Galaxy s6 SM-G920I India version but no luck. Had to restore stock firmware thrice today. Every time I used ODIN 3.10.6 with Unibase or Unikernal it would say kernel is not SEAndroid enforcing and stick to a bootloop. If I use the CF auto root method it says Recovery is not SEAndroid enforcing and again bootloop.
View 10 Replies View RelatedI tried rooting my Galaxy S5 SM-G900T and after the root process with Odin and TWRP in the last step when I rebooted the phone it got stuck on a boot loop in the Samsung logo, so I had no choice but to do a Factory reset which even the OS got deleted in the process. I'm downloading the 5.1.1 firmware for my phone on my computer but I have questions on how to install it on my phone now, because obviously PC is not recognizing my phone or it is not letting me access the storage or sd card once connected. I have Kies 3 in my pc and TWRP on the phone. Which way can I install the firmware on my phone again?
View 3 Replies View RelatedFor the past 6 hours I've been trying to unbrick my Samsung Galaxy S6 Edge (G925-W8). I accidentally cleared all the files/ caches with TWRP, now I do not have any OS on it.
Things I've done: Used Odin to flash a md5 file or a rom I keep getting an error
I'm so lost, I just got the phone yesterday as well too...
I'm new to the Samsung S6. Just brought a second hand S6 edge from eBay, and how to flash twrp recovery to the phone. It's been a while since I flashed a Samsung phone unsure on the process on how do it. I'm not really worried about tripping know....
View 1 Replies View RelatedI flashed the XtreStoLite Bootloader and Modem for 5.1.1. After that I flashed the new TWRP with Odin, it passed so there shouldn't be any errors.
I tried to boot into the recovery after I turned off the phone with volume + / power / home button. At first there was only a picture of an android but now it doesn't do anything when I try to press the buttons.
The Bootloader shows that the knox is already tripped so it's w/e. Tried to check for root in Android terminal but apparently it doesn't recognise the command.
How to proceed, so I can finally boot into twrp?
I have a G920F. It is rooted via odin flashing Unikernel. When I tried to flash TWRP via TWRP Manager (installed from the playstore), the phone would get into a bootloop. It got stuck at the Galaxy S6 screen, with the red line up on the top left corner saying "Recovery Seandroid not enforcing" or something like that. I had to use KIES to get it back up and running (no data loss). Now I rooted it again, and root was successful. I want to get TWRP flashed in order to install the custom ROMS. How do I do that now? I don't want to have to use KIES to recover my phone again. It is running 5.1.1 btw.
View 4 Replies View RelatedJust got my SM-920F
First I tried to flash CF-Autoroot with odin v3.10.6 - after odin passed, the phone rebooted and got stuck on "powered by android" screen
I got the stock firmware (G920FXXU1AOBN) downloaded and flashed with odin.. the phone comes to life...
I try to flash twrp. ... same story
What can be the cause of this ? Can't root or get custom recovery
Should I do the OTA update maybe and try ?
I rooted my s6 with pingpong root and i want to flash twrp recovery. After flashing twrp.img with flashfy app,my ph stuck in logo. I tried some soft reset and other home+volume buttons+POWEKEY . However my phone still stuck in logo.
View 1 Replies View RelatedI decided to root and installed a custom recovery on my G920l.
The root went fine and I installed TWRP but once I tried to reboot into the recovery my phone has frozen and doesn't want to turn off.
I don't get what I did wrong and how to fix it or at least how to turn the phone off?
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
I do have a android backup I took in twrp.
System, data and something else (I forgot)
I formatted internal storage through twrp.
Is there a way I can recover it from the backup?
Can I recover deleted photo without backup?
Info:
iPhone 4, iOS 5.0.1
