I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 RepliesSM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies View RelatedI tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
I see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies View RelatedCan i delete Cyanogenmod with installing stock rom with odin download? so will the recovery uninstall with the cyanogenmod?
View 1 Replies View RelatedI'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
Some reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies View RelatedNot sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies View RelatedToday i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
View 3 Replies View RelatedI'm about to fully flash my device back to stock. I have a o2 UK variant s6. I have downloaded the correct 5.1.1 rom via sammobile. However the worry I have is about the bootloader, do I have to do anything with it.
View 3 Replies View RelatedI had so many problems in the last days. I flashed the first INU 5.1.1 version on my G920I, after a few problems flashing TWRP. Finally I got the phone working and no major problems until last days when battery started to malfunction.
Anyway, after that I tried to flash the latest INU 5.1.1 version (G925IDVU2COGA_G925IODD2COGA_G925IDVU2COGA_HOME.ta r) but the phone couldn't start the Odin process. Then I tried another roms but nothing (all of them 5.1.1) after that I flashed the TWRP and made a stupid "factory wipe" and then my device was soft bricked.
The phone was on boot loop.. Finally, I splitted COGA rom in parts (modem.bin, cache, etc) and flashed system separated from the rest ROM. This worked but the only file that wasn't possible to load was sboot.bin cm.bin. Anyway, after that I tried to reflash COGA in one part but nothing. Finally I used the COF room (INU 5.1.1 from sammobile) and it was flashed full with no problems via Odin but now my device has the TOUCH SENSOR INVERSED. when I type in the right the letters on the left side of the keyboard are pressed.
By now I don't know what to do. Except that I am trying to flash a modded stock rom to get things fixed .
1. I have knox tripped
2. When i flash stock with smart switch i get stuck on samsung boot logo
3. Same thing with odin....stuck on samsung boot logo
4. To get the phone working and boot to desktop i flash custom kernel like unikernel
5. The problem is i want to use stock kernel i want to flash with smart switch and i want to get updates from samsung like i was before because when i use unikernel and i try to updates phone said your rom is modified...
Is there any chance to bypass samsung logo without flashing custom kernel...
I have a SM-G920F phone and I recently flashed the UK version of Lollipop to be able to participate in Marshmallow beta program. I didn't like it because it didn't support my gear VR and I went back to Lollipop. Now I have the UK version installed on my phone and I can't get rid of the Android 6.0 beta OTA software update notification.
So I would like to flash the Nordic countries firmware but my pc is broken and I don't have admin permissions for my pc at work. It there a way to flash it without a pc?
My last Samsung phone was a note 3, 2 years ago. After that I went through some other non Samsung phones so I wanted to check if this was still the same:
I had bought it through my carrier and then downloaded and flashed the factory unlocked firmware via odin to remove carrier bloat.
Does this still work?
first off is my problem with ics which i installed the other day after watching a "how to install" video on Internet. got it installed and working fine but as you may or may not know its not official update so there was alot of issues like the phone would turn itself off and other annoying things.now i want it back to stock (not bothered about the orange bloatware that was on it). i am new to all this flashing/installing.
View 9 Replies View RelatedAnyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
W REV. CHECK FAIL. DEVICE: 2 BINARY: 1
and on odin :
Odin engine v(ID:3.1005)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
It's a SM-G920I
Link me a guide to do a full firmware upgrade via flashing?
View 4 Replies View RelatedAs my phone is rooted, I can't update phone through OTA.
There just came a new firmware on Sammobile (May 21) and I downloaded it. If I flash it, will my phone be wiped?
Also, if it do. Is there anything "to do" so I can get everything with it?
I have tried several times to flash to KG6 (I think it is) 2.3.4Every time it will show I have android version 2.3.3So can a 3 UK locked phone stop me flashing the firmware of choice?
View 9 Replies View RelatedI got a little problem with my TWRP.
Galaxy S6, Android 5.0.2
TWRP v2.8.7.1
I noticed it when i tried to install the Camera Mod. I tried flashing the zip, using TWRP.
It said, that the flashing was done succesfully, but nothing happened. I also tried it with anothter zip file, but still no change.
The folders which should have been changed doesn't show a change in the last changed dates etc.
i found this very cool time widget on his lockscreen. is it a custom rom ? or just a simple app? I have S5 and unrooted.
View 1 Replies View RelatedI'm using the stock calendar on my Verizon S5. As you can see in the screen shot my tasks are a blue color. I would like to change it to red. How do I do that?
View 1 Replies View RelatedIs it possible to change the firmware version/type installed on a Galaxy S6? For example change a 920A to a 920F?
View 1 Replies View RelatedI just did the last firmware update on my X3-02, it seemed to have gone fine but I'm unable the restore the parameters I previously saved. It starts alright, but stops in the middle of the process claiming it has connection problems, and advising that I restart my device and try again (which I did of course). Is it a known problem? Is there a way to restore my content?
View 3 Replies View RelatedI am not able to change my qwerty input languages by swiping <space bar> after my latest firmware upgrade build (KOT49H.G900FXXU1ANCF).
I have tried the following:
1. Adding and removing input languages
2. restart my phone
I flashed my LG G3 Because i felt that the sound was not working anymore and that it can be a software issue which it was a hard ware issue ( loud speaker wasnt connected because of screw) Anyways preformed the stock FW Flash following the guide that highonandroid provided to go completely back to a stock rom. After flashing i restart phone and the boot takes forever until it finally hangs on the tmobile screen. there was a point where i left it over night to see if it will turn on but it still hung for a good 8 hours. Ive done everything i can which can be that i preformed atleast hundreds of hard resets but nothing is working.. there was a point where i did manage to turn it on then i tried updating to lolipop and when it reboots the bootloop is back..
View 2 Replies View RelatedI am currently using Xperia IceCream Pureness ROM on my Xperia Pro with Ultima ICS kernel (allows overclocking upto 2.0 Ghz ).However, I guess I am tired of custom ROMs now and want to go back to original (Stock) ICS but still keeping the overclocking part.what's the process to just flash the Stock ROM keeping my kernel? Bootloader is unlocked by the way.
View 2 Replies View Related