Galaxy S6 :: Touchscreen Inverted After Flashing Stock
Aug 16, 2015
I had so many problems in the last days. I flashed the first INU 5.1.1 version on my G920I, after a few problems flashing TWRP. Finally I got the phone working and no major problems until last days when battery started to malfunction.
Anyway, after that I tried to flash the latest INU 5.1.1 version (G925IDVU2COGA_G925IODD2COGA_G925IDVU2COGA_HOME.ta r) but the phone couldn't start the Odin process. Then I tried another roms but nothing (all of them 5.1.1) after that I flashed the TWRP and made a stupid "factory wipe" and then my device was soft bricked.
The phone was on boot loop.. Finally, I splitted COGA rom in parts (modem.bin, cache, etc) and flashed system separated from the rest ROM. This worked but the only file that wasn't possible to load was sboot.bin cm.bin. Anyway, after that I tried to reflash COGA in one part but nothing. Finally I used the COF room (INU 5.1.1 from sammobile) and it was flashed full with no problems via Odin but now my device has the TOUCH SENSOR INVERSED. when I type in the right the letters on the left side of the keyboard are pressed.
By now I don't know what to do. Except that I am trying to flash a modded stock rom to get things fixed .
I've got a problem with my new Galaxy S6 (G920F). Rooted - la Chainfire with Odin.
After this process the phone seem to work fine. But the x axis is inverted.
Means: If I want to go into appdrawer which is on the right buttom side I need to click at the left buttom.
I tried to change the DPI to 480 what worked fine (after the above mentioned problem). Now camera as well as my keyboard is way to small for the screen. I've already seen the problem with the camera and a black border but it didn't seem to have been fixed yet..
I'm about to fully flash my device back to stock. I have a o2 UK variant s6. I have downloaded the correct 5.1.1 rom via sammobile. However the worry I have is about the bootloader, do I have to do anything with it.
1. I have knox tripped 2. When i flash stock with smart switch i get stuck on samsung boot logo 3. Same thing with odin....stuck on samsung boot logo 4. To get the phone working and boot to desktop i flash custom kernel like unikernel 5. The problem is i want to use stock kernel i want to flash with smart switch and i want to get updates from samsung like i was before because when i use unikernel and i try to updates phone said your rom is modified...
Is there any chance to bypass samsung logo without flashing custom kernel...
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
I flashed my LG G3 Because i felt that the sound was not working anymore and that it can be a software issue which it was a hard ware issue ( loud speaker wasnt connected because of screw) Anyways preformed the stock FW Flash following the guide that highonandroid provided to go completely back to a stock rom. After flashing i restart phone and the boot takes forever until it finally hangs on the tmobile screen. there was a point where i left it over night to see if it will turn on but it still hung for a good 8 hours. Ive done everything i can which can be that i preformed atleast hundreds of hard resets but nothing is working.. there was a point where i did manage to turn it on then i tried updating to lolipop and when it reboots the bootloop is back..
I am currently using Xperia IceCream Pureness ROM on my Xperia Pro with Ultima ICS kernel (allows overclocking upto 2.0 Ghz ).However, I guess I am tired of custom ROMs now and want to go back to original (Stock) ICS but still keeping the overclocking part.what's the process to just flash the Stock ROM keeping my kernel? Bootloader is unlocked by the way.
I have flashed various version 5 stock firmware's and the latest 6.0 using nexus tool kit, as well as specifically flashing only stock recovery using the tool kit and I cannot load into the stock recovery. I've spent hours looking for information on manually flashing the stock recovery without the tool kit but have found the instructions very vauge. Any information on flashing manually only the recovery would be very useful or information on why I may be having this issue.
I know every time i flash a rom it only shows about half of my internal storage. I have a 32gb version. So I end up having to go into a recovery "temp flashed" using the tool kit in order to clear some information and then i get my 32gb's back.
I"m wondering if the space being auto allocated or partitioned is interfering with the flash of the recovery..
I had on my nexus 5 custom recovery, custom kernel (franco) and paranoid android rom (rooted). I wanted to get back to stock and flashed factory image lollipop 5.1 doint this
Since this morning i experience the problem that when i switch my phone on i cannot use the touchscreen. No input is accepted. When i switch the phone off and remove the battery and then switch it on the problem dissapears...
The main (rear facing) camera on my new Nokia Lumia 900 is inverted top to bottom in portrait and left to right in landscape. I cannot find any settings to correct this on the phone. Is this a manufacturing defect that needs the phone to be swapped out under warranty or is there a setting that I am missing to invert the camera.
I replaced my Torch 9800 LCD a couple days ago. The battery was dead, so when I connected it so it could charge, I saw that the charging screen was odd. It is supposed to be black and the gray battery with the yellow thingy, and it was a white background and instead of a yellow thingy, it was blue. Now all of my OS is inverted, I changed the option in the settings but nothing helped. In fact, when it is set to normal, it is inverted, and when is inverted, it is normal, I don't know what to do, this option does not affect the camera. When I use the camera it looks like negative or like an x ray.
Recently I'm having some troubles with my touchscreen. I've had this problem a few times now, and it seems to act up more often now. Sometimes the screen doesn't register my finger. After I reboot, it works fine again. I believe it's always on the same place. Take a look at the screenshots that I've added.
Is this software related or hardware related? I'm in doubt if I should send it back for repair. I'm afraid that i'll lose my nillkin tempered glass screen protector ...
I accidentally flashed the edge version of twrp to my regular s6, 920r4. Now my touchscreen is reversed along the xaxis. When I dial *#2663#, nothing happens, only a dialtone goes on.
i only changing my charging port and it showed dis problem....i have done everytin that needs to be done on the software section---security wipe,memory wipe,downgrade and upgrade OS,deleted apps---none worked....I think its more of a hardware problem than a software problem.
I have a problem on my xperia st15i. The problem is when I want to use the camera or the video the picture in the screen is inverted. For example when I take a picture of a person the head is the bottom part and the feet is in the upper part of the screen. I try to check the settings and I can find the camera settings.
I factory reset my phone and during the process of signing in, agreeing to T&C's etc, a strange problem started occurring - the touchscreen became super unresponsive (had to press something three of five times for it to respond), however, at the same time, the phone would quickly vibrate on touch multiple times, but again, not actually do anything. Moreover, a weird blue text box started appearing around the options I touched and I can't swipe down to access the normal settings menu.
And to top it all off, if I long hold the power button to force restart/power off, it just won't do it. (tried the old "turn it off and on" trick to see it'll do the trick)
Everything was all normal until this point, had my phone for a couple of months, haven't dropped it or anything.
I used to charge my iPhone at night connected to a wall charger. Sometimes I would get an inverted yellow triangle with the message that the device di not support charging, but it would still charge. Now for some reason it gives the message and really won't charge. I have bought a dock to see if it was the wall charger but although the dock works fine when connected by usb to the laptop, I still can't charge when connected to the wall charger. It is an intermittent problem so I don't think it has anything to do with a dirty connector.
Info: iPhone 3GS, iOS 5.1.1, problem is internittent
The keys on the key pad of my BB curve 8520 are inverted (4 of them) when I press the A key I get the Q and vise versa and so are the W and the Z. The funny thing is that the symbol keys on those same keys are correct! How I can correct this.
I recently got a Samsung Galaxy s6 Edge. Loving the phone, but was surprised not to see raw support and shutter speed ability in the stock camera app, as last may I was convinced I had read that it was going to have an 'exciting' camera update. After some research, I discovered this had been updated and implemented in Android 5.1.1.
So does this mean even with the impending 6.0 update, that the only way to use raw or tinker with the shutter speed will be via a third party app? If so that seems a bit lame..
I do love my lg g4 but compared to the s6 edge it looks ancient, the camera capabilities are simply amazing though. That's why I don't get why Samsung hasn't made it accessible from their own app?
My phone is currently rooted, with a different kernel and running deodexed XtreStoLite. How to go back to stock? I want to trade my phone in soon at T-Mobile and I know they'll notice the phone is rooted, since it says "kernel is not seandroid enforcing" when booting up. Everything works fine, though. I know in most people's case that text only shows for bootloop, but mine works fine.
my 920F has previously 5.1.1 from another csc, probably UK and the app freeze stock in 5.1.1 appear but now flashed spanish (ATL vodafone) and the freeze menu has gone i think.
How to come back ? appears that all the 100% apps stays in auto-freeze cause the notifications from apps disappear and lags considerably
I'm new with S6 development. Been playing with SONY devices since 2011. So the question is, can I flash a 920F stock firmware on a 920I device? Will brick my phone? Does it need a special process to make it work? I really want to flash 920F on my 920I and I need to know if its secure.
I have a SM-G920F phone and I recently flashed the UK version of Lollipop to be able to participate in Marshmallow beta program. I didn't like it because it didn't support my gear VR and I went back to Lollipop. Now I have the UK version installed on my phone and I can't get rid of the Android 6.0 beta OTA software update notification.
So I would like to flash the Nordic countries firmware but my pc is broken and I don't have admin permissions for my pc at work. It there a way to flash it without a pc?
