Galaxy S6 :: Rooted With Odin - Touchscreen X Axis Inverted
Apr 18, 2015
I've got a problem with my new Galaxy S6 (G920F). Rooted - la Chainfire with Odin.
After this process the phone seem to work fine. But the x axis is inverted.
Means: If I want to go into appdrawer which is on the right buttom side I need to click at the left buttom.
I tried to change the DPI to 480 what worked fine (after the above mentioned problem). Now camera as well as my keyboard is way to small for the screen. I've already seen the problem with the camera and a black border but it didn't seem to have been fixed yet..
View 10 Replies
ADVERTISEMENT
Jul 15, 2015
I accidentally flashed the edge version of twrp to my regular s6, 920r4. Now my touchscreen is reversed along the xaxis. When I dial *#2663#, nothing happens, only a dialtone goes on.
View 10 Replies
View Related
Aug 16, 2015
I had so many problems in the last days. I flashed the first INU 5.1.1 version on my G920I, after a few problems flashing TWRP. Finally I got the phone working and no major problems until last days when battery started to malfunction.
Anyway, after that I tried to flash the latest INU 5.1.1 version (G925IDVU2COGA_G925IODD2COGA_G925IDVU2COGA_HOME.ta r) but the phone couldn't start the Odin process. Then I tried another roms but nothing (all of them 5.1.1) after that I flashed the TWRP and made a stupid "factory wipe" and then my device was soft bricked.
The phone was on boot loop.. Finally, I splitted COGA rom in parts (modem.bin, cache, etc) and flashed system separated from the rest ROM. This worked but the only file that wasn't possible to load was sboot.bin cm.bin. Anyway, after that I tried to reflash COGA in one part but nothing. Finally I used the COF room (INU 5.1.1 from sammobile) and it was flashed full with no problems via Odin but now my device has the TOUCH SENSOR INVERSED. when I type in the right the letters on the left side of the keyboard are pressed.
By now I don't know what to do. Except that I am trying to flash a modded stock rom to get things fixed .
View 3 Replies
View Related
Jul 10, 2015
I replaced the cracked LCD. Every time time the screen is awakened the touchscreen seems to randomly choose a different Y-axis starting position. Sometimes it is correct sometimes it is a little off and sometimes way off. Is this a defective replacement or is it an android issue.
Attached Thumbnails...
View 1 Replies
View Related
Aug 18, 2012
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies
View Related
Dec 7, 2015
I have tried to flash stock firmware a few weeks ago but got the same problem. Now I am trying to flash engineering bootloader exactly the same problem.the problem is; every time I want to flash something with odin it fails after nand write start and then i get this weird thing on my screen.and yes after this fail i can still use my phone and other things.
View 5 Replies
View Related
Aug 1, 2015
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
View 9 Replies
View Related
Jun 23, 2015
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
View 2 Replies
View Related
Aug 8, 2015
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
View 2 Replies
View Related
May 15, 2015
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed.I was already turn off Samsung Reactivation Lock, check USB Debug.
View 10 Replies
View Related
Apr 29, 2015
While trying to solve my problem with the phone heating up, I decided to reboot my phone however it got stuck on Odin mode! I cannot do the normal solution which is take the battery out since it cannot be done in S6 Edge.
View 9 Replies
View Related
Feb 25, 2016
I would like to update to Marshmallow from lollipop but my charge port is knackered. Doesn't work at all so can't use odin in any way. Can I just flash a new modem in recovery and then flash a marshmallow rom.
View 2 Replies
View Related
May 25, 2015
I tried flashing the newest firmware that came a few days ago.
Quote:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
and after 5-10 minutes, I just take the USB out and boot it up normally, because nothing happens.I'm in download mode, USB debugging is enabled, original cable, Odin v3.09, tried using different usb ports, odin is started as administrator.
View 5 Replies
View Related
Jul 20, 2015
I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
View 2 Replies
View Related
Aug 23, 2015
My Device is saying ODIN and do not turn off during download. How do I get it out of this MODE?
View 1 Replies
View Related
Sep 24, 2015
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
View 2 Replies
View Related
Jun 11, 2015
My phone says downloading do not turn off target but stays stuck there. In the upper left corner it says Odin mode along with a lot of other things.
View 2 Replies
View Related
Nov 18, 2015
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies
View Related
Jul 6, 2015
I see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies
View Related
Jul 10, 2015
It says downloading do not turn off target. tried everything else to restart, all 3 buttons as indicated and still will not work.
View 1 Replies
View Related
Jan 24, 2013
Today i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
View 3 Replies
View Related
May 1, 2015
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
View 10 Replies
View Related
Aug 8, 2015
Can i delete Cyanogenmod with installing stock rom with odin download? so will the recovery uninstall with the cyanogenmod?
View 1 Replies
View Related
May 5, 2015
I have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies
View Related
May 12, 2015
As the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
View 1 Replies
View Related
Nov 27, 2015
Some reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies
View Related
Feb 22, 2016
SM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
View 1 Replies
View Related
Feb 24, 2016
I am currently on 5.1.1 stock with rooted and twrp installed. After flashing 6.0.1 official ROM via Odin will I retain ROOT and TWRP? If not then how can i get rooted and twrp installed?
View 1 Replies
View Related
May 21, 2015
HIs Private Mode still working after root procedure on S6??
I know, that can by fix by one Xposed module called XSecureStorage but we don't have (yet) working Xposed on stock Samsung roms (hope not for long).
What else not working after root - Knox, Samsung Pay...... - what's more ??
View 4 Replies
View Related
Jun 23, 2015
I know there are ways to find out IF a found is rooted, but is there a way to find out the date it was rooted?
View 1 Replies
View Related
Apr 22, 2015
Enabled Encryption on my rooted 128GB Galaxy S6 with custom ROM, for about 3 hours now it has been stuck on 'Encrypting...'.
Should I give it some more time or is it just hard reset and hope for the best?
View 10 Replies
View Related
