I tried flashing the newest firmware that came a few days ago.
Quote:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
and after 5-10 minutes, I just take the USB out and boot it up normally, because nothing happens.I'm in download mode, USB debugging is enabled, original cable, Odin v3.09, tried using different usb ports, odin is started as administrator.
my s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies View RelatedI have tried to flash stock firmware a few weeks ago but got the same problem. Now I am trying to flash engineering bootloader exactly the same problem.the problem is; every time I want to flash something with odin it fails after nand write start and then i get this weird thing on my screen.and yes after this fail i can still use my phone and other things.
View 5 Replies View RelatedI have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies View RelatedI see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies View RelatedAs the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
View 1 Replies View RelatedSome reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies View RelatedI have a serious problem booting my galaxy s6 g920p. i installed king root on android 5.1.1 and then opened it to root my phone (it was wrong). the phone rebooted after 4% of king root actions, and restart again and again and again!
i tried to use odin, but it couldnt do it and failed. the error was 'unable to write'. i tried this rom: [URL] ....
i think the problem is i choose the wrong rom! and i dont know whats my phone exact model.
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed.I was already turn off Samsung Reactivation Lock, check USB Debug.
View 10 Replies View RelatedWhile trying to solve my problem with the phone heating up, I decided to reboot my phone however it got stuck on Odin mode! I cannot do the normal solution which is take the battery out since it cannot be done in S6 Edge.
View 9 Replies View RelatedI would like to update to Marshmallow from lollipop but my charge port is knackered. Doesn't work at all so can't use odin in any way. Can I just flash a new modem in recovery and then flash a marshmallow rom.
View 2 Replies View RelatedI flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
My Device is saying ODIN and do not turn off during download. How do I get it out of this MODE?
View 1 Replies View RelatedMy phone says downloading do not turn off target but stays stuck there. In the upper left corner it says Odin mode along with a lot of other things.
View 2 Replies View RelatedIt says downloading do not turn off target. tried everything else to restart, all 3 buttons as indicated and still will not work.
View 1 Replies View RelatedToday i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
View 3 Replies View RelatedI've got a problem with my new Galaxy S6 (G920F). Rooted - la Chainfire with Odin.
After this process the phone seem to work fine. But the x axis is inverted.
Means: If I want to go into appdrawer which is on the right buttom side I need to click at the left buttom.
I tried to change the DPI to 480 what worked fine (after the above mentioned problem). Now camera as well as my keyboard is way to small for the screen. I've already seen the problem with the camera and a black border but it didn't seem to have been fixed yet..
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
Can i delete Cyanogenmod with installing stock rom with odin download? so will the recovery uninstall with the cyanogenmod?
View 1 Replies View RelatedI have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies View RelatedSM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
I have a Blackberry Curve 8320. Out of sudden the above error pop out after charging battery.I tried with all the commands stated in the device and reset them one by one and still having the same error.I tried to reinstall the BB OS 4.5.0.181 via Apploader, it comes out with another error after loading half way "Unable to reconnect to the device during a multi-stage load operation", then the device keeps on restart on it's own every few seconds.
View 6 Replies View RelatedAt first, it was loaded and the browser would not recognize Flas as installed.I uninstalled Flash, and tried to reinstall. Up Came the message "Adobe Flash Player 11could not be downloaded due to an error (941)I tried everything, including uninstalling and installing each browser "Default Browser from ATT" Firefox and another one called Dolphin,
View 4 Replies View RelatedIm using twrp 2.8.7.2 the latest one
Im on stock 6.0.1
I can flas cm13 but when i flash gapps(not matter which one nano, pico ext..) i get error 6 or 22, what is wrong???
I was taking snapshots with my Xperia Neo V, when my camera closed and now when I start the camera app, it says, "Unfortunately, the camera stopped". Using any other apps like Pudding Camera, It says, "Camera Open Error". My LED flash also does not work.
View 9 Replies View RelatedI notice some problem regarding my SE ELM's camera flash.It seem can't be turn off.Though I already selected no flash option,the phone still fires it.I think it some kind a software bugs because when selecting twilight landscape in scene menu (where the option is having no flash) the flash is completely off.I tried reflashing R7CA61, it seem doesn't solve anything,anybody could help me on this and anybody experience the same?
View 3 Replies View RelatedThat's one problem with my cam: when recording video on flash card there are some delays in picture changing and the image become smooth and then divide into squares?how can i solve this bug?ps: everything is ok when i record on the phone memory!
View 5 Replies View Related