I have tried to flash stock firmware a few weeks ago but got the same problem. Now I am trying to flash engineering bootloader exactly the same problem.the problem is; every time I want to flash something with odin it fails after nand write start and then i get this weird thing on my screen.and yes after this fail i can still use my phone and other things.
View 5 Repliesmy s2 is stuck in download mode, am trying to flash a stock firmware in odin but odin is stuck on <ID:0/004> cache.img
View 3 Replies View RelatedI tried flashing the newest firmware that came a few days ago.
Quote:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
and after 5-10 minutes, I just take the USB out and boot it up normally, because nothing happens.I'm in download mode, USB debugging is enabled, original cable, Odin v3.09, tried using different usb ports, odin is started as administrator.
I have a friend's Galaxy S6 here. A password was suddenly set and nobody knew why, she really said it came out of nowhere! So she asked me to get her photos from the phone and reset it afterwards.
I did that on other phones before so I flashed TWRP and pulled the files with adb. I tried to reboot after that and was stuck at the boot screen. I tried flashing some stock firmware from stockrom.net but Odin always says FAIL!
Not sure where im going wrong really, i used odin to flash a firmware, i was expecting it to wipe the phone completely which is what i wanted it to do because i wanted to start afresh with a new firmware but after installing i still has the remnants of the previous rom on like the theme didn't change, it didn't even bring up the initial setup screens. i did not change any of the Odin tickboxes, am i missing something?
View 1 Replies View RelatedI see that when i use odin to restore i used this to see if it will get rid of lags or not .... I started a thread about the lag i am facing but apparently odin does not format the device my only hope to get this device running smoothly is this method ....
View 1 Replies View RelatedAs the title say can this be a way out because flashfire doesn't use odin to flash a custom binary it directly flashes from phone and hence bypass knox ! Will it work?
View 1 Replies View RelatedSome reason a monster energy wallpaper from zedge somehow turned into a splash screen that won't go back to stock even after Odin flash stock multiple times .It was only a wallpaper at that point now after Samsung boot then the monster energy logo then the t-mobile boot screen.Everything works fine just can't get rid of it even after multiple Odin flash to stock and factory resets
View 1 Replies View RelatedI tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed.I was already turn off Samsung Reactivation Lock, check USB Debug.
View 10 Replies View RelatedWhile trying to solve my problem with the phone heating up, I decided to reboot my phone however it got stuck on Odin mode! I cannot do the normal solution which is take the battery out since it cannot be done in S6 Edge.
View 9 Replies View RelatedI would like to update to Marshmallow from lollipop but my charge port is knackered. Doesn't work at all so can't use odin in any way. Can I just flash a new modem in recovery and then flash a marshmallow rom.
View 2 Replies View RelatedI flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
[code]...
My Device is saying ODIN and do not turn off during download. How do I get it out of this MODE?
View 1 Replies View RelatedMy phone says downloading do not turn off target but stays stuck there. In the upper left corner it says Odin mode along with a lot of other things.
View 2 Replies View RelatedIt says downloading do not turn off target. tried everything else to restart, all 3 buttons as indicated and still will not work.
View 1 Replies View RelatedToday i tried to do a firmware update with odin. My phone crashed and odin failed. I now have a message on my phone saying firmware upgrade encountered an issue. Please select recovery mode in kies and try agan.
View 3 Replies View RelatedI've got a problem with my new Galaxy S6 (G920F). Rooted - la Chainfire with Odin.
After this process the phone seem to work fine. But the x axis is inverted.
Means: If I want to go into appdrawer which is on the right buttom side I need to click at the left buttom.
I tried to change the DPI to 480 what worked fine (after the above mentioned problem). Now camera as well as my keyboard is way to small for the screen. I've already seen the problem with the camera and a black border but it didn't seem to have been fixed yet..
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
Can i delete Cyanogenmod with installing stock rom with odin download? so will the recovery uninstall with the cyanogenmod?
View 1 Replies View RelatedI have the S6 with 5.0.2 and CSC ITV (AP:G920FXXU1AOCV, CP:G920FXXU1AOCW, CSC:G920FXXU1AOCN). Since I leave in Greece, I tried to flash through odin the Stock firmware with CSC EUR but I had fails all 4 times. Tried with both odin 3.0.9 and 3.10. The problem seems to be the hidden file in the end, because everything goes fine until that moment. The result is soft brick. What should I do?
View 2 Replies View RelatedSM-G920.
I tried renegade rom and wanted to go back to stock, but I can't seem to get rid of the boot/splash image it puts when you turn on your phone.
Is there something special I need to do when I flash stock firmware with odin?
Also, as I have sprint, should I be selected RTN for sprint? I had done that, was that bad?
It seems telling twrp to do advanced wipe of system and a bunch of other stuff that apparently is not normally wiped did it.
I have a serious problem booting my galaxy s6 g920p. i installed king root on android 5.1.1 and then opened it to root my phone (it was wrong). the phone rebooted after 4% of king root actions, and restart again and again and again!
i tried to use odin, but it couldnt do it and failed. the error was 'unable to write'. i tried this rom: [URL] ....
i think the problem is i choose the wrong rom! and i dont know whats my phone exact model.
I Just bought a Storm 2 Odin 9550.But on the first hour using the odin, suddenly The Flashlight turned on. I have tried to turn it off, but it is still turning on until now.
View 1 Replies View RelatedHow to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.What confuses and scares me is the warning about the bootloader and modem... Go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
View 5 Replies View Relatedwhere is the flash light on the galaxy s6
View 7 Replies View RelatedI have 5.0.2 firmware now, but the main problem is hot spot not working and even I can't use "shareit" app.I want to flash 5.1.1 firmware on my phone.
My phone is factory unlocked (knox warranty void: 1 (0x0000))but after 1 sec the process fails.I cant attach it's photo. I don't know how to attach image in XDA. It has been rooted easily but the twrp recovery touch didn't work and I installed sprint version and problem solved.If I flash the wrong firmware it will not be flashed or flash will complete and the phone won't work?because I didn't know to flash 920v or 920r4. and finally I choosed the 920v my phone build info is: ( I used "root checker" for this information)
BOARD : universal7420
BOOTLOADER : G920R4TYU1AOD3
BRAND : Verizon
CPU_ABI : arm64-v8a
DEVICE :zeroltevzw
DISPLAY : LRX22G.G920VVRU1AOC3
HARDWARE : samsungexynos7420
HOST : SWDD5706
ID : LRX22G
MANUFACTURER : samsung
MODEL :SM-G920V
PRODUCT: zeroltevzw
INCREMENTAL : G920VVRU1AOC3
RELEASE : 5.0.2
SDK_INT : 21
RADIO :G920R4TYU1AOD3
I got my new S6, however, I immediately noticed that the LED flash is not as bright as my old Nexus 4 or event my wife's Note 4. Moreover, it has a yellowish color, not pure white as the rest of the phones.
View 7 Replies View RelatedBeen trying to flash Gaakxy s6 back to stock for hours. I get this message in ODIN
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2POFC_G920FVFG2BOF2_G920FXXU2POFC_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
[Code] ....
Do i need to flash pit to the phone?
