i only changing my charging port and it showed dis problem....i have done everytin that needs to be done on the software section---security wipe,memory wipe,downgrade and upgrade OS,deleted apps---none worked....I think its more of a hardware problem than a software problem.
My blackberry torch 9860 works but the screen is black. ive done a battery pull and have had it out for about half an hour at the most and put it back in...as soon as i put it back in a tiny hourglass shows on the screen then goes away and the scren stays black....how do i fix this!!
hi my blackberry torch won't start up. i downloaded the new blackberry messenger after installing the latest update. It asked me for a reboot and then all of a sudden my blackberry won't start up. If i run it in safe mode i see battery charging for about 10 seconds and then battery with a red cross in the middle all over again.
I dont know if i'm the only one or the first one but here goes.Model: Torch 9860Operating system: OS 7.0 bundle 1465Pin <Personal Content Removed> My screen just stopped rotatin. it was doing it in the morning but in the afternoon it stopped rotatin.I've tried everything.I tried a soft reset a hard resetI even reinstalled OS 7 but i've read a post the foundedsolution was to go back to OS 6. something.But having a newly purchased telephone not dropped once i find it very silly to downgrade my Operating system.
I tried updating blackberry msg, twitter and blackberry protect through app world, it asked for a reset after the installation, the phone got stuck on the boot screen, did battery pull a couple of times and still it was getting stuck at that exact point, finally reloaded the OS and it still didnt bulge, tried a couple of other OS downgrades and it's still stuck on the boot screen at that exact point
I just got my new torch 9860 and cannot turn it on - I have on the screen a battery with a red cross ! does that mean that the battery is out of service ?it seems that it doesn't reload / charge the battery !?
Since around 2 weeks I have a Torch 9860. Yesterday evening, when I was not using the device the Torch suddenly stopped functioning. When I turned it on again it said it was setting up but it didn't do anything. So after a few minutes I turned it off and on again but now it didn't react at all (so screen stays black, no button lightens up etc.). I can't get it turned on again, not even when I removed the battery for a few minutes. I also tried to charge it again as I wanted to be sure the battery was charged but this doesn't work either.
i have been using my blackberry for the past five months when it suddenly went blank on me the phone just blanked off and the red light started blinking then the load screen with the hourglass and the load bar would come up but the bar wouldn't load and it would blank off again...i was told by the store that i bought it from that the software had crashed and that it would need to be reinstalled... long story short the software can't be reinstalled for whatever reason and i now have a very expensive paperweight
I replaced my Torch 9800 LCD a couple days ago. The battery was dead, so when I connected it so it could charge, I saw that the charging screen was odd. It is supposed to be black and the gray battery with the yellow thingy, and it was a white background and instead of a yellow thingy, it was blue. Now all of my OS is inverted, I changed the option in the settings but nothing helped. In fact, when it is set to normal, it is inverted, and when is inverted, it is normal, I don't know what to do, this option does not affect the camera. When I use the camera it looks like negative or like an x ray.
I have an lg600g through net10 that I've had for about a year now.The other day, I noticed that the outer screen had become flipped and inverted.it will randomly correct itself, but not after a reboot or anything. It just seems to be totally at random. Does anyone know what could be causing this? Everything else functions fine, and even the data on the screen is fine (it's just flipped horizontally and vertically).
I have a problem on my xperia st15i. The problem is when I want to use the camera or the video the picture in the screen is inverted. For example when I take a picture of a person the head is the bottom part and the feet is in the upper part of the screen. I try to check the settings and I can find the camera settings.
i bought a new torch 9860 with OS7. when i try to open any flash video from facebook, it doesn;t open and says my phone doesnot support this. on adobe site, there is no flash player available for blackberry os7.
i have only had this phone four days and it has all of a suddend started switching itself of then reboting itself then flash and vibrate of 2mins then turning it self off again, it has done this constantly for 2 hours now.
Just purchased my new blackberry torch last June and I have been sending it to service center for 5 times already. I am so lost on how to fix the problem. My problem is my phone shows full signal strength and I can't receive not make calls nor messages. I tried to call the service provider for any network problems and they said no problems at all. It happens at ant time of the day. Service center says there no problem on the phone. I just notice that whenever I put the rubber casing on my phone problem occurs.Is there any connection? Im using the rubber casing for easy grip.Signal: -77dbmOS: 7.1.0
Since this morning my Blackberry's speaker hasn't been working, I get no message alerts, no alarm, no music, the camera shutter isn't even going off. However everything is fine when I put headphones in and I can also make phonecalls without speakerphone.
i got my bb torch 9860. it was using wi-fi connection. but when i update software it is not using wi-fi at all, when i go to wi-fi dignostic it shows local ip address as missing mean does not shows local ip address.
I have set up a BB Id using using my laptop and have received a mail from BB validating the same. I have also tried login in from my laptop and it works.However, when I try to log in using my BB Id and password from my phone it is giving an error message 'The user name and password provided do not correspond to a valid blackberry ID'.
Torch 9860 one week old. Battery went dead so I hooked up charger. Now phone will not boot up. I get a red LED light on for 10 seconds and off for 8 seconds, repeats. Tried removing battery. Tried booting in safe mode (holding escape key), nothing works.
I purchased BB Torch 9860 before two days and I already have plan for the data package (200 mb). I connected it to my WiFi at home and it shows that it's connected. Now when I'm at home and I want to surf the internet, it's using the carrier data package, but I want it to use the WiFi. I searched all over and I can't find any solution. any help? Notes: On the home screen, I can see my carrier name (Etisalat) and my WiFi network name. When I go to "Manage Connections", it shows that I'm connected to the WiFi network; but I've never seen the WiFi signal icon in blue or green or any color than grey (which means the BB is not using the WiFi at all) I want to set the default internet access as WiFi. but How ?! Some people told me that it will switch automatically between WiFi and data package, but as far as I see, it's not switching at all. This is my WiFi Diagnosis Report: Wi-Fi Current Profile: Wael Netword SSID: Wael Netword AP MAC Address: 00:25:9C1:F4:82 Security Type: WPA Personal Local IP Address: 192.168.1.101 Signal Level: -63 dBm Connection Data Rate: 48 Mbps Status: Network acquired VPN Current Profile:Concentrator Address:Contact: N/A Authentication: N/A Secure Device IP:Status: VPN profile is not found. BlackBerry Infrastructure Connecting: Error Authenticating router: N/A Authenticating server: N/A Empower your Business with BlackBerry® and Mobile Solutions from Etisalat
ineed help on how to fix my GPX maps, i have purchased this torch 9860 3 month ago, and a month after i purchased this phone i found out that there is no maps available in it, so i tried to complained this to the supplier and they have replaced it immediately, after replacing hte unit, still map is not availble. i need your help on how to load a map,Map loader data is available icon are there, in application management maps is there, but whenever i am opening the maps application, it does not show any maps.