Motorola Atrix 4G :: Stuck In Reboot Loop?
Sep 27, 2011
My phone has been stuck in reboot loop for the last 2 days. I had powered it off on the plane and when i turn on...it keeps rebooting itself after the "Rethink Possible" screen ends. I let the battery drain and still after charging it keeps on rebooting. I am running the phone on "Safe Mode" and only able to run basic Android apps like Gmail, Phone, Gtalk, Camera, etc. All 3rd party apps in Safe mode do not work.
View 4 Replies
ADVERTISEMENT
Jul 27, 2011
Today I noticed my Defy screen was black, and it wasn't responding to power button presses, so I took the battery out and rebooted it. A few hours later it was black screen again, and I tried the same proceedure but watched it. Maybe 10 seconds after it finished booting, it rebooted and then gets stuck in a sequence of showing motorola logo and rebooting over and over. I've tried removing the battery again and it will boot once, then immediately reboot and get stuck in loop again.I have tried the following and the same result every time:boot w/o simboot w/o sdboot w/o sd or simboot with better signalI cannot do factory data reset as I do not have enough time before first reboot to get to it. Attempting to start any app before the first reboot just returns to the menu screen.
I attempted to do 'hard reset' as per these instructions: ttp://www.knowyourcell.com/motorola/motorola-defy/defy-uides/595986/how_to_hard_reset_the_motorola_defy.htmlHowever after motorola screen I get a warning icon with a droid similar to this image but without the menu. Attempting to tap anypart of the screen or press any button did not change this screen:ttp://farm5.static.flickr.com/4132/5194579958_880780d9e4.jpgThe phone has been running mostly okay for the 6 months or so that I have owned it. I say mostly because I upgraded to Froyo 2 months ago, and it was behaving badly (lagging badly) until factory data reset a month ago.
View 6 Replies
View Related
Sep 6, 2011
I've had my Photon for two weeks now and love it, but I've noticed it tend to randomly reboot itself after being removed from a car charger. Now the phone boots until it gets into the android operating system, then resets itself. This makes me VERY nervous for two reasons. I don't want to be stuk with a hone that reboots constantly, and more importantly, I sell them and don't want to have to tell everyone I've sold to that I've made a mistake. Is there a fix for this other than a hard reset?
View 15 Replies
View Related
Feb 2, 2012
So earlier I was deleting some lock screen application and my blackberry was rebooting but then it got stuck on the reboot screen. So it reboots fully and then starts again. I've tried to connect it to the desktop manager and that didn't work so I took the battery out and tried the apploader but the app I wanted to delete was already gone but it kept rebooting.
View 1 Replies
View Related
Aug 17, 2012
I downloaded an app last night and as soon as it installed my phone started to reboot.Since then it has just been on a reboot loop. The white line gets nearly to the end then a red light comes on and it starts all over again. I have tried a soft re-start: alt shift del a battery pull (loads of times!) I have tried to log on to blackberry desktop manager and resettle whole phone but it tries to connect to the phone every time! I am stuck at what else to do
View 1 Replies
View Related
Jan 2, 2012
My BB Torch 9800 is stuck in a reboot loop. I have tried reinstalling the OS using the AppLoader, tried simply hitting "Update" from my Desktop Manager, I have essentially tried everything I have found online about a "nuked or bricked BB". I have been working on this for days.The problem is that, because of the reboot loop, my phone will not stay connected to my computer long enough for anything to actually happen. I get the error message "Unable to maintain JVC connection" or something along the lines of "Your device is not connected, please reconnect, enter your password and continue".I have had this phone for a year and love it. I made an investment in a BB product and I expect it to last more than one year! If I need to take it in for service, so I simply return to the store where it was purchased?
View 5 Replies
View Related
May 28, 2015
My battery ran out so I plugged my 1020 into a charger and it started turning on then showing the no battery icon then off then on again and now that I connected it to my pc all it does is show the nokia then turn off then show the nokia again. I somehow managed to turn it on but everything was laggy and slow so I turned it off again and back to square one...
View 1 Replies
View Related
May 16, 2012
My iphone is stuck in reboot loop and wont connect to itunes. Stuck!
Info:
iPhone 4S, iOS 5.1.1
View 1 Replies
View Related
Sep 10, 2011
It went blank after the "Rethink Possible" screen and the indicator light started flashing red. It did that for a bunch of minutes and then it rebooted again.
View 1 Replies
View Related
May 3, 2010
My mom has literally had her BB 9700 for 2 weeks now and last night it just turned off and when she goes to turn it on it shows that it's turning on and shows the status bar only it doesn't go all the way and just turns right back on? I really don't feel like hassaling with t-mobile if there is another way to fix this!
View 12 Replies
View Related
Dec 15, 2011
I was doing a regular update of the BB apps yesterday late evening, as per the notifications received by the App World. However, the phone shutdown suddenly, and it tried to reboot. It has since failed to boot up, and keeps on shutting down, while trying to reboot. The progress bar always reaches approx. 95%+, and then it starts again. I have already done Battery pull etc., and connected it with a charger - but so far no luck with it. Connected it to the laptop as well - but it does not recognize it either. I have a backup from a couple of weeks ago, so I am wondering, how I can reset the device and restore to an earlier backup? This is a month old Torch 9800 device.
View 8 Replies
View Related
Feb 27, 2012
My Blackberry torch 9800 is stuck in a reboot loop tried all fixes nothing works, desk top manager wont fix, nor will a download of OS, sounds like a common problem
View 7 Replies
View Related
Nov 12, 2012
I tried to update the Blackberry Apps store as notified on phone.Now phone is stuck in a reboot loop.I have tried pulling battery and connecting to computer, pulling SD card and sim.
View 2 Replies
View Related
Apr 14, 2010
I am an IT technician, and we use BES at my company. I have been handed a phone by one of my fellow employees exhibiting the dreaded reboot cycle problem. Yes, I know there are lots of other threads on this, but some are dead ends and some just rehash the same old thing. I'm not certain, but I think this may be different and deserve its own thread. I am working with a BlackBerry Curve 8310 stuck in the known reboot loop. Black screen for 5 seconds, white screen with hourglass for 5 seconds, black screen for 5 seconds, rinse/lather/repeat.
I have tried:
01) Using BBSAK to wipe the device (without Desktop Manager open or running).
02) Using JL_Cmder to wipe the device (without Desktop Manager open or running).
03) Installing the BlackBerry Java Developer Kit and running the wipe variable command on JavaLoader.exe (without Desktop Manager open or running).
04) Deleting vendor.xml and running loader.exe with and without the /nojvm variable from /Program Files/Common Files/etc (without Desktop Manager open or running).
05) Using BlackBerry Desktop Manager to load the newest OS (hey, why not).
06) Tried every combination possible of booting the phone without the battery and inserting it at just the right time, over and over and over again, while all of the processes above attempt to run (BBSAK, JL_Cmder, Loader.exe, etc).
07) Doing all of the above on a Windows XP Professional PC instead of my Windows 7 Ultimate x86 PC.
08) Doing all of the above on a different BlackBerry Curve 8310 without a reboot problem (it works every time; wipe the OS, install the newest one, no issues at all, I'm very familiar with the process).
09) Trying all of the above using a completely different battery.
10) Trying all of the above with the SIM card removed (there is no media card, so no issues there).
As far as all of the documented steps to resolve this known issue, I've tried them all in every which way using every combination I could possibly imagine or invent on the fly, and I've made absolutely, positively no progress whatsoever. The BlackBerry Curve 8310 continues its auto-reboot-5-seconds-into-loading process, and it prevents any of the utilities above to communicate with the phone long enough to establish a handshake before it reboots again. It doesn't seem to matter when I insert the battery at all. The farthest I get is using the loader.exe method (step 04 above). Once it gets to the device initialization step, however, and I insert the battery back in, the reboots simply continue. I am at a loss, and I've done everything that I know to do or that I've learned to do via research on multiple messageboards. Aside from sending teh phone out for repair, what steps are there to take that I have not yet taken to fix this myself? Note that there is no report of the phone being dropped, jarred, or physically mishandled in any way. Nonetheless, could it be that this is not software-related, but hardware-related? What am I missing?
View 5 Replies
View Related
Oct 29, 2015
I have a Z2 that got stuck in a reboot loop after attempting an update. I'd like to make sure I get a copy of my data before I hand it in to have it fixed.
View 3 Replies
View Related
Jun 3, 2014
My iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it.
My iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it.
Info:
iPhone 5c, iOS 7
View 3 Replies
View Related
Jul 26, 2010
I did some cydia updates, against my better judgement, it worked ok for a day or so then choked while txting. Its an unlocked 3g on ios3.0. I think it was mobile substrate, I ssh'd an older version, a deb file but no luck. Is a restore my only option? I have my old 3.0 ipsw.
View 5 Replies
View Related
Apr 25, 2011
My Curve 8900 shut down over the weekend. It won't come back on. It goes off and when I press the power button, the red light comes one, the backlit screen with the hourglass comes on and then it goes off again. A little while later, it starts the cycle over again, backlit blank screen, hourglass spins, bb shuts off.
View 1 Replies
View Related
Feb 4, 2012
I purchased a used Backflip and almost immediately started having the re-boot issue, which I since have learned is very well documented. Next time I'll research the forums b4 buying!My Backflip would spontaneously re-boot and then get caught in a constant cycle by rebooting less than 1 minute after my home screen (finally) appears. It never seemed to be triggered by any specific action, such as pressing the infamous "J" key, or using the camera, as others have stated.Through my research I determined the first thing to do was a reset to factory settings. That took time, but didn't solve anything. Then I went down the loose battery/business card shim route. I have 3 BN80 batteries. None of them solved the problem, nor did any of the various business card shim configurations I tried. All of my BN80 batteries are rated 1380 mAh/5.1 Wh. One poster claims that there are 2 different versions of that battery and the correct one is rated 1320 mAh/4.2 Wh. So I tried my BN70 from my Moto Karma (1140 mAh/4.2 Wh).
I also have 2 SD cards and it re-booted with either of them, and with neither of them.So I mumbled something unrepeatable, and gave-up. :-( I pulled my sim card and stuck it back into my Q1 Karma.Then I thought...could it be? So I re-tried the Backflip and viola! No problems. It's solid as a rock. I can browse the web via wi-fi and use all of the features. I can open it, shut it, use the camera, push any key (hard), including those on the battery side of the keyboard (even with the thinner profile BN70 battery) and I can't get the thing to re-boot! That is until I insert a SIM card. The very same SIM card which works just fine in my other Moto phone.
View 2 Replies
View Related
Aug 16, 2011
My Atrix has the latest update applied and has started recently showing the following error message:"com.motorola.service.main had stopped unexpectedly" Touching ok returns to the home screen for 1 second and the error reappears. This makes the phone unusable.I have performed a factory reset and the error was away for 24 hrs but now it has reappeared.
View 2 Replies
View Related
Aug 1, 2012
Its simply is that when I press the fingerprint sensor to bring the screen on, it starts yelling 'Swap too fast/too slow' bla bla bla BEFORE any actual fingerprint scan and it keeps doing it until I pres the sensor again to turn screen off. Tried disabling and enabling it, cleaned the sensor hardware gently but nothing has helped so far........Its Atrix 4G (till 4G i assume all parts will already go, just 4G will be left) on gingerbread 2.3.4...GB version.
View 4 Replies
View Related
Aug 25, 2011
I am having a very strange problem with the fingerprint reader. The problem started occasionally, but now is almost permanent. When at the lock screen, without even touching the sensor, I get the message "Swipe was too fast". It will instantaneously flash back to say "Swipe finger sensor", but usually flashes back so quickly to the "too fast" message you can't even see the "swipe" message. This pretty much prevents it from reading my finger swipes, although every once it a while I can break in.
I have tried many power cycles, pulling the battery, cleaning the sensor, all with no luck. In fact, I can do a clean power cycle, never touch the finger sensor at all, and when it finishes booting, it is already in the infinite loop. I even tried forgetting all fingerprint settings and re-registering, and most of the time as soon as I got to the screen to start reading my swipes, it would register all illegal swipes even before I ever attempted one. (After many tries, I was able to finally get through the re-register step).
To me it very much feels like a hardware issue with the sensor, but I'm wondering if anyone has seen anything similar as my searches have not turned up anything quite like this problem.
I have a fairly stock Atrix, build 4.5.91, with a decent share of apps, but no lauchers, lockers, task killers, and nothing in the auto-end list.
View 1 Replies
View Related
Nov 22, 2014
Like others, I tried the software update, and then my phone constantly got stuck at the four little circles at start up. I followed some instructions I found on AndroidPit:
1. From a powered off state, press the Power button to start your Nexus 5. When you see the Google logo press and hold the Volume Down key and release when the device vibrates.
2. Use the volume keys to highlight Recovery Menu and press the Power button to select. This will bring you to a screen with an Android on its back.
3. Hold the Volume Up key for 5 secs then release and a new menu will appear.
4. First off, you can use the volume keys to select Wipe Cache Partition. This will cause your phone to restart. once this is done, re-do the previous steps to get back to the same screen (the one that Wipe Cache Partition was on).
5. Highlight Wipe Data/Factory Reset and select using the Power key. Scroll down to Yes, Delete All Data and press the Power button again to select.
6. Your Nexus 5 will now wipe your data and reformat.
7. On the next screen hit the Power button to select Reboot System Now.
It has been 40 minutes now and it's stuck on 'Formatting /data'. Is this normal?
I've only had this phone for a couple of months and it was functioning perfectly until now I haven't rooted it or anything.
View 1 Replies
View Related
Jul 26, 2012
I recently gave my Electrify to my wife and took the phone to US cellular so they could portal our numbers around. They did a factory reset on my phone but since then her data speed seems to be stuck in 1x. It will switch over to 3g occasionally but only for a minute or 2. I've checked for a system update hoping this would correct the problem and also tried a hard reset, another facory reset, reactivation (*228) and to change network settings under *#*#4636#*#*. As a last resort I had my wife take it back to US cellular but they just lied to her and said that even though it shows 1x it was really working in 3g. Downloaded speed test and it shows a .2 Mbps download speed and even slower upload speed. I was thinking about trying to download the gingerbread file and manually installing it but other than this I'm out of ideas. Does anyone know of any I'm going to try a few more things and if I can't get this corrected I will have to return the phone to US cellular and try to get a replacement. Only reason I haven't already is because I figure fixing the thing myself is the quicker of the 2 options. :-)
View 5 Replies
View Related
Aug 4, 2011
So I'm on my third Atrix. First was within 30 day window with occasional random reboot, it was exchanged. The second was perfect up until the new OTA where I had issues with 4.5.91 installing and it was replaced with an upgraded Atrix with 4.5.91 already installed.he current one is rebooting twice daily and it's getting a little old. My question is where to I go from here? I have to be able to be contacted 24/7 for work, and got my peepee stepped on last time. So I cannot wait for an exchange.Can I reinstall 4.5.91 somehow and start from scratch? I've tried the factory reset and every combination of installing and uninstalling various apps I have. Even went a few days with not restoring any apps! I'm really thinking this may be software related, but could be wrong!
View 15 Replies
View Related
Jun 9, 2011
My Atrix does nothing at all when I plug a USB cable into it, regardless of what the other end is plugged into (PC, wall or car). It doesn't charge; it doesn't tell me I have a USB connection, nor does my PC. However, if I reboot the phone with a USB cable plugged in, it works correctly. If it's plugged into a power source only, it charges normally. If it's plugged into a PC, when it finishes booting, there's a USB notifier in my pull-down menu, and I can interact with it as I should be able to. It charges, it syncs, it interacts with Media Link, Windows Media Player... it's just like it ought to be.The cable works (several cables, in fact). The phone works. If the phone reboots and wakes up impaled by a USB cable, everything is great, which tells me there's nothing physically wrong with the phone. It's consistent. I've tried it this way on three PCs (2 laptops and a desktop), at home, at work, and in my car.My FW and software are all up to date. I had the problem when I got the phone home, and I've done a complete factory reset, and then updated everything (or checked for updates and found software to be current) again.
View 1 Replies
View Related
Feb 15, 2014
I flash android 4.4 rom but haven't got into s-off,so I sucked in reboot loop and can't get into recovery. I tried boot boot.img at first my phone still in reboot loop and after a few times after boot boot.img I cant even selet item by volumn up or down in fastboot (the boot.img was selected from the rom :One_4.06.1540.2_odexed.zip which is the rom I trid to install )...
Here is my phone information:
***UNLOCKED***
M7CDUG PVT SHIP S-ON RH
HBOOT-2.26.0000
RADIO-U2.07.3501.14
OpenDSP-v31.120.274.0617
QSC-1237.20.28.0614
OS-2.17.1402.2
eMMC-boot 2048MB
Jun 21 2013,23:48:32.0
FASTBOOT USB
View 1 Replies
View Related
Jun 3, 2014
My iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it. My iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it.iPhone is not jailbroke.
Info:
iPhone 5c, iOS 7
View 1 Replies
View Related
Apr 29, 2011
I have had the Atrix for about two months now, and it seems to restart/reboot randomly, I thought I should check if anyone else has seen this? Should I take it back to the AT&T store and get a replacement or does anyone know the fix to this? Maybe the upcoming update will fix my issue...
View 11 Replies
View Related
Jun 27, 2011
i bought atrix just 2 days back and now it's started showing lot of problems.1) When i press power button to turn the display off phone becomes unresponsive) when i tried to remove some of the application i can't as uninstall button itself is disabled3) every now and then either application is not loading or running applicaitons are crashing4) phone has started behaving strangely as it reboots on its own and hang on its own sometimes.I called my carrier and they were clueless so asked they'll come back in 2 hours time.
View 2 Replies
View Related
Mar 17, 2010
I have a Nokia N96 with the latest version of software (which has been operating ok for now - and I think that the N96 has Symbian OS 2.3 or something?)
I installed a program on my phone and it warned that my memory was low --> "Memory low. Delete or move some data from c: Phone memory" so I uninstalled a 2mb theme.
I then installed a little divx player which I thought wouldn't be much but then I turned off my phone and on (the other program said that I had to reboot my phone) and then my phone would start up and it would start loading up but it would immediately display the "Memory low. Delete or move some data from c: Phone memory" error (while it was trying to autoload everything that autoloads on the phone).
When this error message comes up the only option is "Ok" but the OK button is non-responsive (we all know that these phones take a while to load up) and within a couple seconds (you can't push a button and get a single response out of the phone to even try sort the problem out) the phone switches off and then switches back on with the same error without being able to do anything about it - perpetual loop!
Because it is in this perpetual loop I tried pluggin in my cable to delete data off C: (anything I could possibly get to in time) but it doesn't pick it up in time!
So, I am stuck in this "Low memory loop" without being able to get out of it. I desperately need my phone, I was thinking there would be a soft-on startup (e.g. hold x and y buttons for example and switch on and it doesn't load up some autoload stuff?) but I couldn't find one after *extensive* googling and forum-browsing.
View 3 Replies
View Related