My mom has literally had her BB 9700 for 2 weeks now and last night it just turned off and when she goes to turn it on it shows that it's turning on and shows the status bar only it doesn't go all the way and just turns right back on? I really don't feel like hassaling with t-mobile if there is another way to fix this!
View 12 Replies
I tried to update the Blackberry Apps store as notified on phone.Now phone is stuck in a reboot loop.I have tried pulling battery and connecting to computer, pulling SD card and sim.
View 2 Replies View RelatedSo earlier I was deleting some lock screen application and my blackberry was rebooting but then it got stuck on the reboot screen. So it reboots fully and then starts again. I've tried to connect it to the desktop manager and that didn't work so I took the battery out and tried the apploader but the app I wanted to delete was already gone but it kept rebooting.
View 1 Replies View RelatedI downloaded an app last night and as soon as it installed my phone started to reboot.Since then it has just been on a reboot loop. The white line gets nearly to the end then a red light comes on and it starts all over again. I have tried a soft re-start: alt shift del a battery pull (loads of times!) I have tried to log on to blackberry desktop manager and resettle whole phone but it tries to connect to the phone every time! I am stuck at what else to do
View 1 Replies View RelatedMy BB Torch 9800 is stuck in a reboot loop. I have tried reinstalling the OS using the AppLoader, tried simply hitting "Update" from my Desktop Manager, I have essentially tried everything I have found online about a "nuked or bricked BB". I have been working on this for days.The problem is that, because of the reboot loop, my phone will not stay connected to my computer long enough for anything to actually happen. I get the error message "Unable to maintain JVC connection" or something along the lines of "Your device is not connected, please reconnect, enter your password and continue".I have had this phone for a year and love it. I made an investment in a BB product and I expect it to last more than one year! If I need to take it in for service, so I simply return to the store where it was purchased?
View 5 Replies View RelatedMy battery ran out so I plugged my 1020 into a charger and it started turning on then showing the no battery icon then off then on again and now that I connected it to my pc all it does is show the nokia then turn off then show the nokia again. I somehow managed to turn it on but everything was laggy and slow so I turned it off again and back to square one...
View 1 Replies View RelatedMy iphone is stuck in reboot loop and wont connect to itunes. Stuck!
Info:
iPhone 4S, iOS 5.1.1
Today I noticed my Defy screen was black, and it wasn't responding to power button presses, so I took the battery out and rebooted it. A few hours later it was black screen again, and I tried the same proceedure but watched it. Maybe 10 seconds after it finished booting, it rebooted and then gets stuck in a sequence of showing motorola logo and rebooting over and over. I've tried removing the battery again and it will boot once, then immediately reboot and get stuck in loop again.I have tried the following and the same result every time:boot w/o simboot w/o sdboot w/o sd or simboot with better signalI cannot do factory data reset as I do not have enough time before first reboot to get to it. Attempting to start any app before the first reboot just returns to the menu screen.
I attempted to do 'hard reset' as per these instructions: ttp://www.knowyourcell.com/motorola/motorola-defy/defy-uides/595986/how_to_hard_reset_the_motorola_defy.htmlHowever after motorola screen I get a warning icon with a droid similar to this image but without the menu. Attempting to tap anypart of the screen or press any button did not change this screen:ttp://farm5.static.flickr.com/4132/5194579958_880780d9e4.jpgThe phone has been running mostly okay for the 6 months or so that I have owned it. I say mostly because I upgraded to Froyo 2 months ago, and it was behaving badly (lagging badly) until factory data reset a month ago.
My phone has been stuck in reboot loop for the last 2 days. I had powered it off on the plane and when i turn on...it keeps rebooting itself after the "Rethink Possible" screen ends. I let the battery drain and still after charging it keeps on rebooting. I am running the phone on "Safe Mode" and only able to run basic Android apps like Gmail, Phone, Gtalk, Camera, etc. All 3rd party apps in Safe mode do not work.
View 4 Replies View RelatedI've had my Photon for two weeks now and love it, but I've noticed it tend to randomly reboot itself after being removed from a car charger. Now the phone boots until it gets into the android operating system, then resets itself. This makes me VERY nervous for two reasons. I don't want to be stuk with a hone that reboots constantly, and more importantly, I sell them and don't want to have to tell everyone I've sold to that I've made a mistake. Is there a fix for this other than a hard reset?
View 15 Replies View RelatedI was doing a regular update of the BB apps yesterday late evening, as per the notifications received by the App World. However, the phone shutdown suddenly, and it tried to reboot. It has since failed to boot up, and keeps on shutting down, while trying to reboot. The progress bar always reaches approx. 95%+, and then it starts again. I have already done Battery pull etc., and connected it with a charger - but so far no luck with it. Connected it to the laptop as well - but it does not recognize it either. I have a backup from a couple of weeks ago, so I am wondering, how I can reset the device and restore to an earlier backup? This is a month old Torch 9800 device.
View 8 Replies View RelatedMy Blackberry torch 9800 is stuck in a reboot loop tried all fixes nothing works, desk top manager wont fix, nor will a download of OS, sounds like a common problem
View 7 Replies View RelatedI am an IT technician, and we use BES at my company. I have been handed a phone by one of my fellow employees exhibiting the dreaded reboot cycle problem. Yes, I know there are lots of other threads on this, but some are dead ends and some just rehash the same old thing. I'm not certain, but I think this may be different and deserve its own thread. I am working with a BlackBerry Curve 8310 stuck in the known reboot loop. Black screen for 5 seconds, white screen with hourglass for 5 seconds, black screen for 5 seconds, rinse/lather/repeat.
I have tried:
01) Using BBSAK to wipe the device (without Desktop Manager open or running).
02) Using JL_Cmder to wipe the device (without Desktop Manager open or running).
03) Installing the BlackBerry Java Developer Kit and running the wipe variable command on JavaLoader.exe (without Desktop Manager open or running).
04) Deleting vendor.xml and running loader.exe with and without the /nojvm variable from /Program Files/Common Files/etc (without Desktop Manager open or running).
05) Using BlackBerry Desktop Manager to load the newest OS (hey, why not).
06) Tried every combination possible of booting the phone without the battery and inserting it at just the right time, over and over and over again, while all of the processes above attempt to run (BBSAK, JL_Cmder, Loader.exe, etc).
07) Doing all of the above on a Windows XP Professional PC instead of my Windows 7 Ultimate x86 PC.
08) Doing all of the above on a different BlackBerry Curve 8310 without a reboot problem (it works every time; wipe the OS, install the newest one, no issues at all, I'm very familiar with the process).
09) Trying all of the above using a completely different battery.
10) Trying all of the above with the SIM card removed (there is no media card, so no issues there).
As far as all of the documented steps to resolve this known issue, I've tried them all in every which way using every combination I could possibly imagine or invent on the fly, and I've made absolutely, positively no progress whatsoever. The BlackBerry Curve 8310 continues its auto-reboot-5-seconds-into-loading process, and it prevents any of the utilities above to communicate with the phone long enough to establish a handshake before it reboots again. It doesn't seem to matter when I insert the battery at all. The farthest I get is using the loader.exe method (step 04 above). Once it gets to the device initialization step, however, and I insert the battery back in, the reboots simply continue. I am at a loss, and I've done everything that I know to do or that I've learned to do via research on multiple messageboards. Aside from sending teh phone out for repair, what steps are there to take that I have not yet taken to fix this myself? Note that there is no report of the phone being dropped, jarred, or physically mishandled in any way. Nonetheless, could it be that this is not software-related, but hardware-related? What am I missing?
I have a Z2 that got stuck in a reboot loop after attempting an update. I'd like to make sure I get a copy of my data before I hand it in to have it fixed.
View 3 Replies View RelatedMy iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it.
My iPhone is stuck in a guess what is just a reboot loop. It gets stuck on the apple logo for maybe 5 minutes then it goes to the spinning wheel for another 5 minutes ( wheel doesn't spin just stuck ) then goes back to the apple logo again. I've tried holding both the home and power button to reset it but all that does it restart the process. I've put in DFU mode to restore but my computer and a friends computer both won't recognize it ( also tried to cables ) so I can't restore it.
Info:
iPhone 5c, iOS 7
I did some cydia updates, against my better judgement, it worked ok for a day or so then choked while txting. Its an unlocked 3g on ios3.0. I think it was mobile substrate, I ssh'd an older version, a deb file but no luck. Is a restore my only option? I have my old 3.0 ipsw.
View 5 Replies View Relatedi reloaded my blackberry 9700 but it is stuck on the reboot screen where it says blackberry with the unfinished booting line and a distorted screen
View 2 Replies View RelatedMy Curve 8900 shut down over the weekend. It won't come back on. It goes off and when I press the power button, the red light comes one, the backlit screen with the hourglass comes on and then it goes off again. A little while later, it starts the cycle over again, backlit blank screen, hourglass spins, bb shuts off.
View 1 Replies View RelatedConnected my S5 to charger and left the room, started hearing the Cricket Wireless theme a few minutes later, then again, then again. That was when I discovered I was caught in a reboot loop.
Phone model - Samsung-SM-G900AZ
Firmware version - G900AZTUU3BOG3
Carrier - Cricket Wireless
I've gone through most of the posts here regarding this and have at this point:
replace battery with spare (no change)
Recovery Mode - clear cache (no change)
Recovery mode - reset to factory, restore from Google backups (no change)
Recovery Mode - reset to factory, setup as new device (no change)
Disable Wifi - (no change)
Odin + reflash (no change)
Disable wifi (no change)
Disable wifi and LTE data - (no change)
I'm not really sure what to do at this point and am starting to wonder if this is a hardware issue, not software. This phone has never been rooted, and in fact is just under a month old (my previous, never had an issue with it S5 died a horrible death at 25mph from the hood of my car) so didn't even have all of the apps I normally use installed.
I have read many ways to fix this problem but I can not find away to fix it using a Mac? I don't Have a PC so I am lost. My phone just stays on reboot loop
View 1 Replies View RelatedCouple weeks ago I updated my phone to a windows 10 preview (I forgot the build number) and it installed fine. As expected there were some bugs, so I read online on how to fix them after restarting my phone and doing a soft reset, it didn't work. I then had to do a factory reset- or a hard reset. It then threw my phone into a perpetual state of spinning cogs and a never-ending battle that is so close to lost I can feel the defeat seeping in like a plague. I've connected it to my computer to do the NSRT but my phone only sees it as a power source. I've taken the battery out, brought it to the Microsoft store, and I've even tried to hack into it via computer. However the same problem shows every time:
View 1 Replies View RelatedBackground: bought a new phone and received it Friday, activated it no problem. Tried using the BDM to "switch devices" and it was LOADS of problems installed the newest one. THOUGHT I finally was able to transfer all the info to my new phone, but here's where the real problem starts Okay, when it starts to reboot, that progress bar fills ALLLL the way up, sits there for like 2 minutes, and then restarts AGAIN with the little red light, the progress bar fills ALLLL the way up, sits there for like 2 minutes, and then restarts YET AGAIN and it's been doing this for the last 10 hours! I have removed the battery and media card and EVERYTHING, left it out for like 10 minutes, reinserted the media card and battery and it just keeps doing this. If I try to connect it to the computer, the computer won't recognize it and the BDM says, "Blackberry Desktop Manager cannot communicate with the connected blackberry device. If the device is rebooting or has a dead battery, click Retry to attempt to reconnect once the device reboots. Otherwise you might need to update the blackberrry device software to correct the problem"How in the world am i supposed to update the software on the device if i can't stop it from rebooting?
View 11 Replies View RelatedI tried plugging it into a wall charger for a day, i tried leaving it unplugged for a day, i tried leaving it plugged into the wall without the battery in for a day. I do not think it is the battery or charging related. Oh, and i have 2 batteries, neither let it boot.
So, i tried all the suggestions about App loader. The PIN is not recognized UNLESS, i plug it in without a battery (after i see the charging icon with red X on the screen). If i try to continue, nothing happens until i put in the battery, which immediately removes my PIN to PIN Unknown or whatever. So, it will continue and loader will freeze at step 2, device initialization.
Anyone had this exact issue or know how to get passed this point?
For reference, i never dropped it or damaged it. Actually i haven;t been using this phone, i decided to update it, all went well. Took the battery out and left it for a couple weeks. Went back to use it and this is what i got. Oh, and I tried JL_CMNDR and nothing happens.
Like i said, no error screen, i get a red LED, it attempts to boot up, but it barely moves and then I get black screen and red LED again and it just loops this process.
* I do have the extra ATT Insurance. However, I've had it for 1.5 years and it has been externally modded to ****. I could easily change it back to stock parts, but the "sticker" is gone. 1. Would ATT let me exchange it? 2. Does it have all my info on it?
I can't seem to find this exact problem, so bear with me if I missed it. My problem is that when I did a bettery pull a couple of days ago, my 9700 went into constant reboot. I was able to correct this by connecting to DM and reloading the OS (.714). This was the same OS I was previously using. Now, when I do a BP, the progress bar goes all the way to the end and it just freezes. I have to pull the battery again, and reload the same 714 OS from DM. No help from TMO online help, so I thought I would ask here.
View 12 Replies View RelatedGot my bb about 2 months ago and everything's working fine until today i couldnt retrieve email on my bb. i tried to reboot (hard) and reformat my phone but each time when i tried to reset the email settings, a message "your device had a problem connecting to the server" will appear.i'm using a bb bold 9700 currently.
View 4 Replies View RelatedWhen I went to bed last night my Z3 was working fine. When I woke up, any app I opened closed with the "___________ has stopped" message, so I decided to reset my phone. Now it's stuck in a loop where it will turn on until it gets to the loading page with the blue wave background before turning off and starting this again and again until I hit the little reset square by the microsd with a paperclip.
I've tried connecting it to PC companion and the Mac version (I have a mac at home but can access PCs.) Once it gets to the part where I have to hold the power button and down key while plugging it into the computer, it does nothing and I can't move forward.
I can't seem to put it into flash mode, and I tried installing the EMMA flasher program but it wouldn't recognize that my phone was connected. After more googling seems that maybe unfortunately my phone needs to be in flash mode for this to work.
I haven't modded my phone, haven't installed many apps, and I actually know nothing about phone dealing with/ programming/ booting/ computer language words so some things I am reading online definitely go over my head. I am willing to try though!
My phone will still charge though!
Phone stuck in boot loop. Have downloaded LGNPST & DLL. LGNPST won't detect phone in upgrade mode. When pressing 5 & power buttons with phone connected to USB port phone goes into verizon download message on screen. LGNPST shows emergency mode with phone book circle highlighted in red. Click on dll tab & choose the ddl. When selecting the PB tab,can't save file in Brew_script as help topic shows. Brew_ script will open, shows brew,then mif & mod. Can't save dll. Any help? No sd card in phone.
View 13 Replies View RelatedReboot complete (main screen/carrier logo) First Time and Device Usable Second Time
Minutes:Seconds
3:13 - 3:37 Custom Theme
3:11 - 3:25 Default Carrier Theme
Theme's have no real effect from what I've noticed. Unless you have a really big gfx intense theme.
3:13 - 3:23 Password
3:13 - 3:25 Password + wallpaper on mem card
7:09 - 7:21 "Memory Clean Turned on" + Theme + password + wallpaper on mem card Re-test (that was way too long)
6:36 - 6:45 "Memory Clean Already On" + Theme + password + wallpaper on mem card.
3:23 - 3:45 "Encrytion Media Card Only" + BerryWeather + Theme + password + wallpaper on mem card + Mem Compression Memory Clean and Encrytion (Device Memory Enabled) either one of those on will increase reboot time by atleast 2-3mins. When enabling Device Memory encryption Memory Clean is automatically turned on and can't be disabled. So in my testing reboot time was between 6-7mins. My current config setup is that last test. Since Password is on, I see no need for Device Memory encryption to be on. Without the password you can't gain access to device files. ZonaSnap , QuickLaunch, Blink all preloaded during each test. 8 Email Accounts, about 80 read emails, and 100+ sms, 41 apps anyone that is getting 1-2min reboot please post your settings.
I sold my z2 to a friend, and when he has tried to insert his new sim has forced the red reset/ off button down too hard, and its stuck. So now when the phone has any charge it is stuck in the cycle of reseting itself, vibrating 3 times and the sony logo comes up, and it just keeps doing this. Are there any tips on unsticking the reset button.
View 4 Replies View RelatedSo my phone got stuck in the infamous bootloop. I am getting a new one shipped to me. I just don't know of my old one is backed up. I don't even think my contacts are. It has an SD card, but I don't think I ever set up a back up for it. Is there any way to back it up now? Sadly it won't stay on long enough to get passed the AT&T screen.
View 3 Replies View RelatedI updated to windows 10 mobile and proceeded to do a hard reset, well my icon died during the reset and is now in an infinite loop where it charges enough to turn on then tries to do the reset before dying and starting the cycle over again.
Is there any way to stop my icon from turning on while charging? Or any other way to fix this? I'm really not trying to have to switch back to my 822.
