I just updated my phone with the new release and it is stuck on the connect to itunes screen... any ideas... I have tryed the steps about reboot ing my pc ect... nothing works!
Info:
iPhone 4S, Windows7
Yea i was updating firmware and my phone restarted on the Ovi suit seed that it's normal but it didn't turn back on it just flashes the buttons and thats all few seconds later it turns of.
View 3 Replies View RelatedI bought an unlocked iPhone 5 today. I inserted my sim card, and the phone didn't ask me for the pin, nor did it change its network status to anything else but "searching". For several hours I waited, restarted the phone, toggled plane mode on and off, and tried a few other things I read up on on the internet. None of them worked, the network status still said "searching". So, I decided to try and update the device OS, from iOS 6 to 7.1.2. At first, I tried doing this OTA, so from within the iPhone`s settings. It downloaded the software for about 10 minutes or so, only to after a while, emerge with a message saying that the update failed. This happened several times. I then read a few other posts online, and was recommended to update the device via iTunes. So, I tried this, where, again, it downloaded the software, did some other things such as extracting the software, and then, somewhere in the process, a message popped up on iTunes saying the update had failed. The phone is now still in update mode however, with only the Apple-Logo being displayed on the phone, along with a half-full status bar. Â
What should I do? Should I hard restart the phone? Will this brick it, or is it already bricked? And how can I get it to find a network?
Info:
iPhone 5, iOS 6
So about 20 minutes ago I connected my iPhone to my computer and iTunes prompted me to update it. I accepted, but as it was applying the updates some type of error popped up. Long story short, it failed to update and now when I turn on my phone it's frozen with the screen showing the USB cord & iTunes icons. I've tried: -Shutting it down by holding the sleep/power button-Shutting it down by holding the Home + sleep/power button-All of my USB ports on my computer-Reinstalling iTunes As soon as I turn it on, it briefly shows the Apple icon then it goes back to the same screen with the iTunes/USB icons. When I connect it to my computer it makes the connection sound but it won't register on iTunes.
Info:
iPhone 4S
I've tried to update both my iphone 4 and 4s both of which was unsuccessful, now all I have on my phones screens are the itunes logo and the usb as if it wants me to attached to itunes! when i do neither of the phones will show up on the itunes screen on my computer ! as if it wont recognise them, went into the apple store in town they want to charge me 5 pounds to sort it which i think is a joke since both phones were fine before this update !
Info:iPhone 4S
i tried to update my iphone and it gave an unknown error message with code (1015) which rendered the phone useless unless i restore. then i tried restoring it but gave the same error message after its almost done. please help me on how to restore my iphone even if its without the update.
Info:
iPhone 3G, iOS 4
failed to activate 3gs after update
Info:
iPhone 3GS, iOS 5.1
how can i reboot my iphone after new update failed?
Info:
iPhone 5c, iOS 8.1
I tried to update my iPhone 4 (on ethernet internet) and iTunes said that it failed to update.
I tried to turn on/restart my phone, but all that comes up is a "connect to itunes" image message.. I have my phone plugged in but iTunes is not registering it..Â
what do i do??
a couple of days ago I tried to do an update on my W995a via the SEUS program (latest version used, downloaded the day I did the update), It got to about 90% then stopped and stayed at 90% for about 2 - 4 minutes then it came up with Update Failed, I've retried the process a few times and all have failed, I've used the repair feature in the PC Suite program to try to fix the phone but it fails about about 90% as well, I had no issues or software glitches with the phone before attempting the Update. The phone now will not load the OS but instead just sits there with the keypad lights on. Is there a solution to this problem? As this is my main phone and the SEUS program has broken it.
View 3 Replies View RelatedJust went to update my iphone 4 (32gb) from 4.0.1 to 4.0.2 to be greeted yet again with 'update failed, unknown error' followed by iphone in recovery mode.Now, my 3GS did this on 4.0 and 4.0.1, my 4 has done this on 4.0.1 and now 4.0.2.
I dont mind, I have backups but I also have 16gb+ of audio. What is going on? is this something with my laptop or a fault with ios4 updates? Im running latest, 32 bit version of itunes on windows 7.I've tried restoring and updating twice now unsuccesfully.
So, after I updated to ios 5.1 my iPhone 4 has some problems I never kinda seen before. I own it for more than a year . While at home or any other area, good signal,has a bumper, while speaking with friends I get the Called failed problem. Tried reset network settings, even I restored the firmware ... same . Happens a few times a day..
View 3 Replies View RelatedI applied the latest update to my phone and it failed.iTunes suggested that I restore the device.The restore operation failed as well.Now my iPhone is no longer detected iTunes.It does not appear as a removeable drive or camera to Windows.Online troubleshooting failed to help.The only reaction that I observed is that Windows informes me that I had connected a high speed device to a slow (USB 1.0) port and suggested connecting it to another port.Next I am going to take it to the AT&T store where I got it and see if they can help.
Info:
iPhone 3GS, Windows XP
I recently tried to update the software on my iphone 4s through itunes, it appeared to be almost complete when I got an error message saying the update had failed. Now my phone will only load up to the screen saying I have to connect to itunes (pic of a USB pointing to the itunes logo), problem is that now itunes doesn't recognise the phone at all. I have tried all the troubleshooting ideas for itunes not recognising the phone but nothing has worked - USB connection is fine, have reinstalled itunes, apple mobile device program is working properly.. When connecting or disconnecting by plug the computer recognises it (makes the noise to say something's been plugged in/unplugged) however the phone doesn't show up in Computer either. Clearly I need to restore the phone but with itunes not recognising it?
Info:
iPhone 4S, iOS 5.1.1
I just bought my iphon last night & tried doing it`s first update this morning. I got an error message that the update failed & now my iphone only shows a pic of a usb cable with an arrow pointing to the itunes logo.I already tried holding down the on off buton & the home button like the instructions say. Problem is that when the instructions say I should be at the part where itunes is again recognizing my iphone, my itune is not recognizing my iphone. So I am stuck. I follow the instrustions, but the resluts are different, so I can`t continue to the next step. Very frustrated, as the nearest Apple store is over an hour`s drive away.
Info:
iPhone 4S
software update failed how do I save the pictures that are on the phone?
Info:
iPhone 4, iOS 5.1.1, failed during update
I tried to update my iPhone software (after successfully backing up to iCloud, and then successfully updating iTunes software) but got a 1604 error message. The phone is stuck in recovery mode, and all attempts to restore the phone have resulted in failure. I keep getting the same error message. Basically, the phone never gets past "preparing to restore." I am linking my iPhone 4 to a PC Windows XP Professional, with up-to-date software. This is the third time I've tried (and failed) to update the iPhone software, though the other two times I was able to restore. This time nothing seems to be working.
Info:
iPhone 4, iOS 5.0.1
Iphone 4s failed during update now shows itunes logo and usb connection
Info:
iPhone 4S, Windows 7
Just downloaded the update 5.1.1 and tried to install it. But the install failed and now my iphone 4 is frozen with the itunes logo and the usb logo. What should I do?
Info:
iPhone 4, iOS 5.1
So I haven't been able to update my iphone, I get a 3194 error after loading the ipsw file. When I run a diagnostic I get a Secure link to iTunes Store failed error, which I think causes the problem. I have tried the netsh winsock reset fix, and still no results, as well as looking for LSP conflict.
Detailed Description ......
The network connection could not be established.
Last successful iTunes Store access was 2012-05-22 16:54:25.
Info:
iPhone 3GS
I tried to update my iPhone 6 to the latest iOS 8.1.2 via lightning cable, but it failed for some reason because of an unknown error (17).
Now my iPhone won't update, restore or reset to factory settings... it is stuck in restore mode with the iTunes logo and cable showing on the screen.Â
Here is the log:Â
2014-12-12 15:23:56.000 iTunes[1205:707]: restore library built Sep 12 2014 at 18:50:34
2014-12-12 15:23:56.000 iTunes[1205:707]: iTunes: iTunes 12.0.1.26
2014-12-12 15:23:56.000 iTunes[1205:707]: iTunes: Software payload version: 12B440
2014-12-12 15:23:56.000 iTunes[1205:707]: iTunes: Using MobileRestore state machine
[15:24:27.5597] Successfully applied power assertion
[Code] .....
Both PC Suite and Ovi were working perfectly until I updated my Ovi to the latest version early this week. Now, whenever I start Ovi, it will crash after 15-20sec if my 5800 is connected ( either bluetooth or USB ). If the phone is not connected, Ovi will stay without any issue. Btw, PC Suite is working fine. Here is the error message pop-up on the screen when Ovi crashed.
"Nokia Ovi Suite 2 has stopped working". A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". No solution is actually provided and the only option is to "Close program". Here is the windows error log :
Faulting application name: NokiaOviSuite.exe, version: 2.0.2.42, time stamp: 0x4b20f226
Faulting module name: QtCore4.dll, version: 4.5.0.0, time stamp: 0x49a63f0a
Exception code: 0xc0000005
Fault offset: 0x000573e3
Faulting process id: 0x1494
Faulting application start time: 0x01ca8e7c0e7fd709
Faulting application path: C:Program FilesNokiaNokia Ovi SuiteNokiaOviSuite.exe
Faulting module path: C:Program FilesNokiaNokia Ovi SuiteQtCore4.dll
Report Id: 8bb5c369-fa6f-11de-85e1-0024e8bf6e9f
Here are the Ovi Suite and Phone firmware details:
Nokia Ovi Suite 2.0.2.42
Nokia PC Suite 7.1.40.1
PC Connectivity Solution 9.45.0.0
Connectivity Cable Driver 7.1.23.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.38.0
Nokia mPlatform 2.6.40
Ovi Desktop Sync Engine 1.1.0.77
Operating system: 32-bit Edition
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.7600.16385 (Default browser)
- Mozilla Firefox 3.5.6
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385)
System config :
O/S : Windows 7 Enterprise 32-bit ( Version 6.1 - Build 7600 )
This is what i did so far :
i) Uninstall Ovi , re-download from Nokia web, reinstall : Failed to fix
ii) Uninstall Ovi and all Nokia related software , clean Registry and reinstall Ovi Suite : Failed to fix
iii) Format and reinstall Windows 7 ( Yes, I did !!! ) , re-download and reinstall Ovi Suite : Failed to fix
I strongly believe this error is caused by the latest version of Ovi Suite, as i have another laptop which running with the older version of Ovi Suite works perfectly with my 5800. I have uninstall the Ovi Suite, I will only try it again when next release is available.
I am trying to restore my iphone 3G back to original settings after failed update and always receiving error 1015.
Info:
iPhone 3G
i am unable to record videos, when ever i try to i get the error " failed to start recording". i can also play none of the videos and Internet videos doest work too.
View 3 Replies View RelatedHi, i have tried using the facebook application on my Sony W705, but whenever i try login to the application, it always throws an error "Login Failed". Can you please help to provide a solution to this application.
View 6 Replies View RelatedScreen unlock pattern failed 20 times, phone is now locked pending google username and password, which I have enter hundreds of times with no success, I know the username and password is correct as I can log in via PC and view latest downloads on my phone etc.
Have tried to repair the phone via PC companion, everytime the download begins an error message comes up "unable to start update"
Have been to the optus shop and contacted sony over the phone, being told by optus that my phone is 7 days over its warranty and it will cost me to unlock, Sony helpdesk advised that it was "Easy" to fix and i just needed to repair the phone via PC companion, which clearly is not as easy as stated. I am left without a phone which is badly affecting my work, I have been told it will take at least 2 weeks for the phone to be unlocked if it is done by the provider, google password is not working.
I updated my N97, and after that my phone did not work properly, the old version was 2.0 and the new is 2.1, the charging light did not work and i get black screen when i turn my phone on.
View 4 Replies View Relatedmy computer always ends up not responding while trying to update the software to ICS. I've tried to update the phone for many times and always ends with my computer become not responding. and i've tried to update with 2 different computers and get the same result.
View 9 Replies View RelatedI have a Nokia N97 with Map Version 0.1.24.114 installed (clicking About in Maps also shows v3.03 so I am not sure which one is the one i should refer to). I get a text notification from Nokia saying I have a map update so I check software update and indeed version 3.04(165) is there but I cannot update> Please advise. My navigation and turn-by-turn guidance (as well as weather, lonely planet and events) all work but I want to have the latest maps version for accuracy.
View 30 Replies View RelatedI have just updated the new software on my n97, it downloaded and updated fine then it kept coming up with memory full on C drive, delet some memory. After about an hour trying to reach the settings menu to delete some data off that drive, i thought turning the phone on and off might help but i was wrong it now comes up with phone start up failed. contact the retailer. Can i fix this myself or should i just take my phone back to the shop and does my guarantee cover this seems it was a nokia update?
View 4 Replies View RelatedAttempted to update to 3.03 last week, recieved the message update failed, didn't have time to sort it then. I have since updated to firmware v2.1, done a hard reset and reformatted my device. Attempting an over the air update get the message "update failed"! Only app I have listed as installed is the ovi store client.
View 24 Replies View Related