Motorola Atrix 2 :: Soft-brick After OTA Update To ICS?
Nov 17, 2012Artix 2 soft-brick after OTA update to ICS
View 3 RepliesArtix 2 soft-brick after OTA update to ICS
View 3 RepliesI don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. The device was rooted before the 5.1.1 android update.
Nexus on bootloop tried every method ,most of them . Flashing new factory image is also of no good. Cleared cache , factory reset and still on bootloop. On flashing lollipop factory image it gets stuck on boot loop and on flashing KitKat factory image or using any custom ROM like cyanogenmod it gets through boot but is unable to detect sim and apps like play store and camera keep crashing and refuses to open.
View 2 Replies View RelatedI downloaded CF-autoroot and followed these steps and now it is stuck on bootloop. I downloaded Odin 3.10.6 and right cf-auroroot version as well. URL..."When done, you should see “RESET!” on ODIN program and your S6/S6 Edge will reboot to show something like below. This is where CF-Auto Root roots your S6/S6 Edge."It never boots into recovery and it's immposible to manually boot to it as well. It just auto-reboot and stuck on "samsung powered by android."
I'm trying to download stock ROM from sammobile but its gonna take 4 hours ...
I've solved it with Samsung Kies firmware initialization but still no root ... Again tried and now it's rooted ...
I got the Atrix 2 today, The Back lighting on the 4 soft keys on the bottom, settings, home, return and search, the backlighting doesnt always come on.. usually when you touch them or the display screen, they light up bright white.
View 14 Replies View RelatedItunes unpacks the software but it never installs on the iPhone: "error code: 14"
Info:
iPhone 4S, iOS 5
Is the Motoactv capable of switching tracking modes in the same workout? If I go for a ride followed immediately by a run, do i have to stop, End Workout, then start a new run workout or is there a way to tell the device I have switched activities?
View 4 Replies View Relatedit all started with my memory card being corrupted somehow - I found some topics that recommended resetting the mobile - which I did after backup up the contents of my memory card (original Nokia 8GB) - I did the same some time ago and it worked flawlessly back then - but not this time. After copying / formatting the memory card all my applications where gone - restoring the previously backed up files didn't work this time. Additionally when I tried to access/change anything Theme related or try to use the mode switcher the handset crashed every time. My next thought was - maybe there are some leftover settings - maybe a reset will help. The reset did work so far - but the problem with Themes remains. Additionally I am no longer able to start the OVI store application, nor the Advanced Call Manager application that I downloaded from the Ovi store before it stopped working.I did reinstall the firmware now but this didn't solve the problem either. Accessing anything theme related (even installing new ones) triggers a restart of my handset.Did anybody experience some similar behaviour?
View 2 Replies View RelatedJust notice my phone just prompted new update 4.3.13 available for download.My existing version is 4.3.10 Anyone know what are the updates in 4.3.13.My phone is from Singtel - Singapore, non-rooted, original rom.
View 5 Replies View RelatedI was wondering if there was any word on the first/newest software update to the Motorola Atrix 2? I love this phone. I also loved the original Atrix, but with so many software issues on their latest update, and much complaining to AT&T that since Mototola's fix was to say forget it and make the Atrix 2, that should be my fix...I got AT&T to give me the Atrix 2 for free!!.Like I said I like this phone just as much as the original Iphone. So when I went in for my upgrade in August, instead of getting the Iphone 4 like everyone (and knowing the I4S was around the corner) I wanted something different. I get new phones all the time. The Atrix and Atrix 2 have been my favorites. I've had 0 issues.So if anyone knows if theres any software updates in the works, which im sure I get automatically anyway, let me know!
View 13 Replies View RelatedI have a Middle East Region Motorola Atrix with froyo 2.2.2 As Gingerbread is released in US few days back so Can anybody tell me when NON US ATRIX phones are supposed to be updated to Gingerbread and do i have to update it through Software update tool or OTA update.
View 13 Replies View RelatedYesterday I downloaded and installed the gingerbread update. Following instructions I changed the usb mode to whatever the setting was that I needed to complete the update via computer file transfer (mass storage mode?). After completing the update I sat and played with all the shiney new features until my battery died (oops) and now I can't charge my phone because I can't power it on long enough to change the usb mode back to "none" or whatever. Is there a way to override this or externally change this? Prior to the update the usb would default back to charging mode if the battery died, I am happy about the updates, but this issue is a HUGE problem. I hadn't installed the usb driver on my computer to charge via usb connection, and the phone needs to be turned on in order to initialize thisdriver, so I can't even charge that way. If there is no way to externally change this setting, what in the world am I supposed to do to get my phone to turn back on?
View 1 Replies View RelatedSince I updated to the Gingerbread operating system the phone does not recognize the USB to charge and the pc is telling me that it cannot recognize the device either. I have tried to update drivers, but that has not worked.
After the battery died, the phone would flash on the Motoblur screen for a few seconds. Eventually (after more than 12 hours of the flashing on and off screen) it did charge up, but I don't know how to keep it charged and I cannot connect or sync with the computer. It is not the cable, as I have the same issue with the car charger connected.
I was able to do a External Reset, but it still has the same issue. AT&T doesn't know anything about it and has offered no solution. What should I do? Everything was working fine before the update. Is there any way to restore the old operating system?
My phone has been rooted for ages, and I'm wondering if that has anything to do with the fact that I download the ICS update, reboot when prompted, and when phone boots up again, I get message box saying "Software Update Failed."
View 2 Replies View RelatedI had a phone update at around 10:00 P.M. on my Atrix 2. After installing the update, my phone auto re started. Since then it keeps turning on then off over and over and over. When I do manage to manually power down and start it back up I have no service and cannot call or text. My WiFi seems to work but thats about it? Is anyone else having this problem? What can I to solve this problem?
View 6 Replies View RelatedI received notification for updating 9 applications and finished with 3 of them. I closed the list of applications to check my settings. How do I get back to the list of applications that need to be updated?
View 3 Replies View RelatedI try to update the phone by installing and running the Motorola Update Manager (I don't have wifi), after I start the process on Vista Update Manager found the update, downloaded it and start the update process.At 50% of the last step (I don't recall the name) the phone rebooted itself which I think it was part of the process. After restart windows give me a message "qhsusb_dload" windows cannot find the drive!So windows fail to recognize the device and phone gives me"Modem did not power UP (0) Starting RSD protocol support" with Motorola logo in background.
I tried resetting the phone to factory setting in recovery console and it fails.I tried running the update few different times with same resultContacted Motorola customer support, factory rest: FAIL.The only way I can start the phone is with choosing "Boot Android (No BP)" in recovery console. by doing that I can start the phone and load the motoblur and... there is no App installed on the phone and everything in the phone is rested already.When I check my phone status after booting by "Boot Android (No BP)" I see:IMEI: Unknow; IMEI SV: unknown; Baseband version: unknown; Build number: OLYFR_U4_1.8.3ystem version: 4.1.83.MB860.ATT.en.USMotorola WebTop version: OHWT_U1_4.257.30AT&T said that they are going send me a new phone and for now I'm using my old BlackBerry. I'm posting this to see if you guys have any suggestion/idea before I get my new phone
I completed an update on my Atrix on Monday morning. Since then I have not been able to view my pictures that I took before the update. Some of my music files will not play or are no longer visible. I do not have the option to set up the facelock option, I also do not appear to have a phonebook any longer. Was my update incomplete? Is something wrong with my memory/micro SD card? Or is something else wrong with my phone?
View 1 Replies View RelatedI lost my contacts with the update. I thought that I could use Motorala Media Link to sync the contacts with my PC (Windows 7) with Windows Live mail. Media Link does not show Contacts in its list.
View 4 Replies View RelatedRunning 4.1.83 update. Prior to this update, Skype didn't work at all. Just static for the folks I was trying to talk to. I just removed Skype. After the update I re-installed, Skype and great, it works. It's important as I talk to a friend in South Africa fairly frequently. Then I started noticing reboots / crashes. Phone just restarts, big old Red M logo advertises the fact the phone has just fell over and is restarting. I think I'm noticing a pattern. I've started leaving Skype running in background so I can get incoming calls from my South African friend. Every time that I've noticed a reboot, Skype was running. It could also be related to poor signal strength. By the way, I'm using Skype over my WAN data, not Wifi. Is there a way to get a crash log from the system.
View 2 Replies View RelatedSo i download an update for about 4 hours, it crashes at least twice in the process, and then when everything is finally working, I notice my contacts are completely gone. The ones that sync from facebook are fine, but I don't care about those. Lots of them are gone though. I have no idea what they were saved in before. What account... etc. This happened last time i updated the system, but i had my old phone so i just went to at&t and had them add them all. i didn't think it would happen again, but IT DID!
View 5 Replies View Relatedhow long the software update v55.13.25 is supposed to take to download? Even though my phone has been consistently connected to wifi, it still hasn't downloaded.
View 1 Replies View RelatedI installed the OTA 2.3.6 update last night and now my phone never shuts the screen off automatically. I've tried resetting the timeout period, but no luck. Something is keep it awake after the update.
View 3 Replies View RelatedI'm currently using software version 2.3.6 (GINGERBREAD) and my phone keeps telling me that my phone is ready to update to 67.21.125.en.US (ICE CREAM SANDWICH - US). I am able to download it, and when it restarts my phone the little android unpacking symbol shows up like it is installing just fine. When it finishes all the normal startup screens are displayed, but when the phone is ready to use, it says update failed. I'm not sure why this is happening. I've tried it while charging, while not charging, while on WIFI, while using only cell data, while in airplain mode, and every other way I can think of. Motorolla even lists it as being available to update as of October 12th this year, but I'm still not able to get it working.
View 3 Replies View Relatedi have a stock AT&T Atrix shipping version Blur_Version.4.1.26.MB860.ATT.en.US. im planning to SIM unlock it and send it to the Philippines. Is it possible to update to version Blur_Version.4.1.57.MB860.ATT.en.US to Blur_Version.4.1.83.MB860.ATT.en.US and to Blur_Version.4.5.91.MB860.ATT.en.US here in the Philippines? what should I do?
View 5 Replies View RelatedMy Atrix has been acting very unstable ever since the 2.3.4 update. It reboots everytime when the phone is connected to the HD dock or PC via the USB port during a phone call
View 12 Replies View RelatedI am stuck on the Red Motorla M after pulling the Update.No LED's, I AM able to get into Fastboot etc.
View 3 Replies View RelatedAfter updating to the new JB, my ATRIX will not stay paired with the bluetooth radio in my truck.Before JB, I had no problems.Anyone else have any pairing issues after the update?
View 5 Replies View RelatedI can't get into the My Gallery app after the update.
View 3 Replies View RelatedAfter I updated to Gingerbread I lost the ability to copy more than one item to the clipboard. Now the clipboard only stores one item.
View 1 Replies View RelatedUnder Froyo, I was able to link contact entries that were for the same person but were pulled from different sources and weren't automatically matched. After the Gingerbread update, I can no longer do this.
In one particular case, I have a contact that was pulled from Facebook, for who I now have another email address. I can't add that email address to this person's contact since it says that Facebook contacts aren't editable. So I created another entry for that person with the same name but the additional email address. I want to end up with one contact entry that aggregates both the facebook and additional contact info but I can't do that anymore.