Galaxy S6 :: Soft Brick Flashing CF - Autoroot
Apr 17, 2015
I downloaded CF-autoroot and followed these steps and now it is stuck on bootloop. I downloaded Odin 3.10.6 and right cf-auroroot version as well. URL..."When done, you should see “RESET!” on ODIN program and your S6/S6 Edge will reboot to show something like below. This is where CF-Auto Root roots your S6/S6 Edge."It never boots into recovery and it's immposible to manually boot to it as well. It just auto-reboot and stuck on "samsung powered by android."
I'm trying to download stock ROM from sammobile but its gonna take 4 hours ...
I've solved it with Samsung Kies firmware initialization but still no root ... Again tried and now it's rooted ...
View 2 Replies
ADVERTISEMENT
Feb 2, 2016
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. The device was rooted before the 5.1.1 android update.
View 1 Replies
View Related
Jul 18, 2015
Nexus on bootloop tried every method ,most of them . Flashing new factory image is also of no good. Cleared cache , factory reset and still on bootloop. On flashing lollipop factory image it gets stuck on boot loop and on flashing KitKat factory image or using any custom ROM like cyanogenmod it gets through boot but is unable to detect sim and apps like play store and camera keep crashing and refuses to open.
View 2 Replies
View Related
Nov 17, 2012
Artix 2 soft-brick after OTA update to ICS
View 3 Replies
View Related
Apr 19, 2015
Can't get the soft keys to light up, regardless of the setting being turned on.
View 5 Replies
View Related
Sep 17, 2015
Last week my phone went off because the battery was drained to 0.
Then next morning I connected the phone to my car's charger and when I turned it on, I figured that the soft keys are not working anymore.
I have tried multiple methods like clearing cache, factory reset (through Settings and Recovery), but none of that worked.
I am running the latest stock firmware (5.1.1 U2COH2).
Is there an app that allows me to reconfigure the keys? Could this be a hardware issue?
View 3 Replies
View Related
Nov 10, 2015
The soft key buttons at the bottom of my Galaxy S6 no longer light up or work for that matter. So not happy as I have only had this phone since June 2015.
View 3 Replies
View Related
Apr 24, 2014
Ok the soft keys down by the home button on the bottom....mine do not light anymore. I have them set to the 1.5 second time out. Even when I put them on "always on"they don't light up.
View 8 Replies
View Related
Apr 13, 2015
How can I disable soft keys backlight without power saving? Is no longer in the settings of the Galaxy s6.
View 10 Replies
View Related
Dec 1, 2011
I am running windows 7 starter. I update my device so installed kies and update, got interrupted somehow and soft bricked. Sent it off to samsung who told me to just be careful when using kies. Tried then to install software using odin and it is bricked again!rom numerous conversations with a fellow giffgaffer have determined that it is a driver problem. Apparently I should have 'samsung composite device (abd) listed and I don't. I plug it in my netbook and some times I get 'samsung composite device' (no abd) and when I go into device manager it always has a yellow triangle next to it.
Most of the time I get 'unknown device' or 'gadget serial' in manager and when I try and update drivers it says they are up to date, manually I can find samsung composite usb driver and then I get one of two things 'software found but could not install' (error 10) or 'windows stopped the device working' (error 43.) have tried installing kies, uninstalling kies, installing samsung device driver for mobile phones. Nothing has worked. I have exactly the same results on my desktop pc, running 7 home premium so I don't think it is a usb port problem.
View 9 Replies
View Related
Feb 4, 2012
Just wondering, does anybody find on the s2 that the soft back key doesn't always respond? I'm sometimes having to tap mine several times before it responds and it's driving me bonkers.
Also, I have noticed that the android os is high on this phone and the strange thing is, the percentage seems to go up when the phone isn't actually being used for anything, as in, sat idle for a few hours. Just wondering what the average percentage should actually be with this phone.
My battery life is rubbish too. Thursday and Friday, it was fine but I didn't use the phone much at all. Today it was fine until 6pm, again, didn't really use the phone but this evening, I have been texting and it dropped 40% in three hours and I've had to put it on charge.
I'm not happy with this and will be contacting Samsung on Monday but before I do, would be interested to hear what other people are experiencing with the android os and back key. Battery life is more or less irrelevant as that varies from person to person according to usage. I'm just disappointed as I seldom had to charge my galaxy s before bedtime unless I tethered, which I hadn't done today until I had to put the phone on charge.
View 2 Replies
View Related
Jan 18, 2016
Out of nowhere, the screen will not respond. I still have a pulsating blue LED and soft keys light up.
I've tried all button combos and still no success... Its running stock and no customization at all...
View 3 Replies
View Related
Apr 15, 2010
I have been playing the same game of BrickBreaker for 2 months and would like to see how far I can go (so far 2,000,000 points and 462 lives). I know that if I download a new version of the OS (as I was recently prompted to do) and reboot the phone I will lose the game. Is there some way to save it so I don't lose the score when I download and reboot?
View 3 Replies
View Related
Mar 12, 2012
Itunes unpacks the software but it never installs on the iPhone: "error code: 14"
Info:
iPhone 4S, iOS 5
View 1 Replies
View Related
May 8, 2012
US Apple Employee took my Japan iPhone, tried to unlock my iPhone by installing an app called "unlockit.co.nz", put my AT&T sim card in, read FAILED, and said it didn't work. He reassured me that my Japan iPhone will still work when I go back there, but I have no reassurance now. Did they mess up my iPhone and not taking responsiblity for it? Do Apple employees typically install sketchy 3rd party unlock apps that change APNs?
I went into the Apple Store today with both my US iPhone 4 (16 GB Black) and my Japan iPhone 4 (16 GB Black). My US iPhone was having issues with its bluetooth and home button is sticking a lot. He couldn't replace it since it was out of warranty and suggested that I find a 3rd party repair shop or look on Craigslist.
My Japan iPhone 4 is still under warranty and suffers from one spot on the screen being exceptionally bright. He said he could replace my Japan iPhone with a US AT&T iPhone. I told him, I'm not sure if that would be smart since my Japanese Softbank SIM card may not work anymore in an AT&T iPhone. He explained to me how unlocking works and said he can easily set it up for me. He took my Japanese iPhone, went to some site, installed a program, did a few things, and took my AT&T SIM Card out and put it into my " newly unlocked" Japan iPhone. The phone kept saying SIM Failed and he restarted it, and it still didn't work. He put my AT&T SIM card back into my US iPhone and thankfully, it still read my SIM Card.
He offered to exchange my Japan iPhone for a US iPhone 4, and suggested that I call AT&T to have them unlock my phone for me. He said they would do it, if I was out of contract with AT&T, but I wasn't, so I went home back at status quo, or so I thought.
I looked at my Japan iPhone again, and noticed that there was an app called, "unlockit.co.nz". It opens up Safari and pulls up something called APN Changer. Upon closer inspection, it's the same app/site the Apple Tech pulled up when I was at the store. I'm a bit leary about odd apps, especially apps that originated from the domain co.nz. I googled the site and looked it up, and it seems a bit odd.
Now, I don't know what this program exactly does, but I'm a bit annoyed that I don't know what app the Apple Employee installed and what it exactly did. I have no assurance that my Japan iPhone will work in Japan now after he installed this app and did something. Is it the Apple policy to go and install 3rd party apps? Will my Japan iPhone still be good when I go back or am I going to land in Japan and spend the first few hours at an Apple store trying to get my phone replaced/fixed?
Info:
iPhone 4, iOS 5.1
View 5 Replies
View Related
Aug 17, 2012
Is the Motoactv capable of switching tracking modes in the same workout? If I go for a ride followed immediately by a run, do i have to stop, End Workout, then start a new run workout or is there a way to tell the device I have switched activities?
View 4 Replies
View Related
May 14, 2011
Word mole and brick breaker are missing ,I just got the phone today and they both disappeared after I downloaded an application to the downloads folder.
View 1 Replies
View Related
May 23, 2015
The capacitive buttons are garbage in my opinion and I constantly accidentally hit them. Not to mention they are backwards. I would like to disable them completely and enable the soft buttons like on the Nexus 5. Is this possible?
View 6 Replies
View Related
Aug 19, 2012
by mistake my word mole and brick breaker game got delete how would i get it back......i m using curve 8520
View 1 Replies
View Related
Mar 28, 2010
When I play; I notice a slight (but annoying lag) when I move the cursor to deflect the ball. The lag wither causes me to miss the ball or through it "off" my intended course for it. Obviously annoying when I work my way up to more advanced levels.
View 7 Replies
View Related
May 17, 2010
finesse, sch-r810 that will respond at all. i lost web and wap after flashing, called metropcs after a few weeks, and lost voice service moments after that. service could not be found, thought i'd just flash again. a problem occurred that left my phone with no filesystem (i assume), and now i dont think anything is seeing my phone (com ports inactive). ive tried the well knowns that google would offer, bitpim, qpst, qdxm, p2k, multiloader and others, as well as plenty of non-samsung software that i thought/hoped might work (unipst, optiflash, others). just this evening i downloaded sdk tools and weird 'unlock sim' 'secret zone' softwares, nothing.
i actually recorded the processes, both computer and phone screens (desktop capture+webcam). planned an upload to Internet, but would like a solution/tip to accompany the problem. thats why the cdma request, or any software that can access qualcomm chipsets, or similar/usable characteristic. my model seems replaced to have been by newer samsung phones, though if the internals are similar, i'd like to express that to others.
administrators: i did post this just a minute ago in the metropcs forum first, by mistake. ive got a thousand tabs open and didnt notice until after the 'submit', if youre going to remove one, do that one please. its not in a general place and i didnt quickly see how to delete. thanks.
View 1 Replies
View Related
Oct 23, 2015
I'm new with S6 development. Been playing with SONY devices since 2011. So the question is, can I flash a 920F stock firmware on a 920I device? Will brick my phone? Does it need a special process to make it work? I really want to flash 920F on my 920I and I need to know if its secure.
View 1 Replies
View Related
Aug 1, 2015
I tried flashing a rom with Odin but it fails everytime, and different reason everytime
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
[code]....
I use windows 10, I have the kies drivers and am using the phone's original cable ...
View 9 Replies
View Related
Jun 23, 2015
Recently I've downloaded the last firmware from Vodafone Spain for the SM-G920F model using the wonderful SamFirm windows exe. The first time I got a ZIP file containing all the partition images and the second time ("Binary Nature" selected) I got the typical four files for the four ODIN'S fields.
Now, here comes the doubt, which of them should I flash? I mean, does the four files format include the PIT file for example? Or there are no differences between doing it using the ZIP file or four files format? Which is the better format/way to install it completely clean?
View 2 Replies
View Related
May 9, 2015
Is it possible yet to flash different modems/basebands? I am using a G920I on AT&T and would like to flash the AT&T modem.
View 10 Replies
View Related
Feb 12, 2016
I'm about to fully flash my device back to stock. I have a o2 UK variant s6. I have downloaded the correct 5.1.1 rom via sammobile. However the worry I have is about the bootloader, do I have to do anything with it.
View 3 Replies
View Related
Aug 8, 2015
So, I want to flash the latest version of TWRP to my 920i ... My only question is this..
- Flash the new TWRP 2.8.7.1 (the one for Android 5.1.1) with Odin
This one for the normal S6 models & This one for the Edge models
In Odin 3.10.6, which option do you select to flash TWRP? I'm assuming BL is for bootloader, CP is for modem - what do you use for the recovery? AP, CSC, or UMS. I don't want to select the wrong thing and brick my phone.
View 2 Replies
View Related
May 29, 2015
In the two days since I got my S6, twice the screen has started flashing back and forth from whatever page I am on to the notification page back and forth. none of the buttons will stop it. If I go to another app, it starts alternating with the notification screen. It is nearly impossible to power off because it is on the screen so briefly, it is hard to tap and have it register.
View 1 Replies
View Related
Dec 27, 2014
I am a rooted galaxy s5 with Verizon g900v on 4.4.4. I am trying to install twrp so that I can get a custom rom on my device. I am able to download the recovery file but when trying to flash the app crashes. I did enable the sd card patch and downloaded the required busy box and it is still not working!!!
View 1 Replies
View Related
Aug 1, 2010
I want a state of the art android phone with a physical keyboard, that a poor college student can afford the plan for. (I'm on PagePlus using the $30/month for 1200 min, 1200 texts, and 50mb data.) That leaves me choosing between the Droid 2 and the Samsung Epic 4G. I prefer the Epic because of the super 16gb micro SD. My current phone is a Samsung, and it's served me well for about 2 years now despite being dropped all the time
Question: Can I flash a Galaxy S Sprint Epic 4G onto Verizon to use PagePlus? I know Sprint uses CDMA, which leads me to believe the Epic could work on Verizon's network (which PagePlus uses), but beyond that I'm clueless. Can anyone tell me if this is possible or not, and if so, where to look for more information?
View 1 Replies
View Related
Jun 28, 2015
How can I flash a custom rom on the new bootloader??? I installed 5.1.1 to my G920F but I want a custom rim 5.0.2
View 3 Replies
View Related