After updating to the new JB, my ATRIX will not stay paired with the bluetooth radio in my truck.Before JB, I had no problems.Anyone else have any pairing issues after the update?
View 5 RepliesMy 2006 BMW X5 comes with a bluetooth handsfree feature. It used to pair and work with my iPhone very well. Now, I am off the iPhone and much happier with my Atrix.However, the bluetooth doesn't work too well. I can pair the phone with the car fine. However, the phone keeps constantly disconecting and connecting (like every minuto or so), which makes it unusable with the car's handsfree. I know it is not a problem with the car (it still pairs fine with the iPhone) nor with the phone (it pairs well with my bluetooth headset). It's just the combination that is bad. I've read somewhere else that BMW's are tricky and several android users are having trouble. It seems that android lacks a handsfree profile required by BMW. Anyway, is anyone having the same problem? Any ideas of what can be done? (I've already unpaired all phone from the car, repaired, removed the battery from my phone, etc, etc, etc).
View 3 Replies View RelatedI have a replacement 860 that won't pair with my car phone. The other one did. This one won't ask for the PIN, and then says it can't pair because the PIN is incorrect. How typical is that. It's the same car phone, and the same model phone.
View 1 Replies View RelatedSince the latest update, system version 4.5.91 android version 2.3.4, Bluetooth voice commands will no longer unlock the screen. Therefore, voice commands will not work until you manually unlock the screen. This is a recipe for disaster when using in the car! I've found several other complaints like this, but have found no solutions from Motorola. Under location and security settings I have enabled Allow Bluetooth Bypass, however this has no effect. I have turned phone off and back on. I have disconnected Bluetooth devices and reconnected, but problem still exists. The whole point of having Bluetooth in the car is the ability to make phone calls without reaching for or looking at the phone for increased safety.
View 6 Replies View RelatedHowever, one day after the update my wifi would not work and continued to give me "ERROR" under the on/off option. Also, my bluetooth tries to turn on, but won't.
View 3 Replies View RelatedMy iphone 4s is not pairing with my new bluetooth headset. I turn on the bluetooth on phone- make sure all other devises are off - turn on the headset - it says it is pairing - but my phone only shows it is now discoverable - shows the headset name - but never makes the connection.
Info:
iPhone 4S, iOS 5.1.1
My car's bluetooth (2011 Honda Odyssey) was working perfectly with my Droid X (which had "FroYo" 2.2 software). Due to problems with my phone, Verizon had me update to the newest software (2.3, called "Gingerbread"). I now cannot pair the Droid with the car. I have called Verizon and Motorola both, who both stated that the most likely culprit was the car. Honda states that it is compatible with "Gingerbread" on newer phones, but not certain if it is on the original Droid, and Motorola has not sent a sample for Honda to test for the original Droid. What do I do? Is there a fix available here? Should I ask Verizon or Motorola to put the previous version, 2.2 or "FroYo" back on my phone?
View 1 Replies View RelatedWhen entering the six digits pass code displayed by SYNC, the keyboard on the phone suddenly quits after I enter only 2 to 5 digits. The phone displays a message that there was a problem with pairing this phone. Is some setting on the phone wrong or is the phone hardware having a problem.
View 4 Replies View RelatedI was pushed the new upgrade for the Droid Bionic (4.0.4). With the old OS, I unable to pair a Mac Book Pro and an iPad withe the phone and connecto the internet via Bluetooh.
View 3 Replies View RelatedI got the D3 yesterday and paired it with my preinstalled 07 MB GL bluetooth system. I can make calls fine, but the only data that transfers to the MB display is the phone numbers, no names or information. I have previously paired a Palm Pre, Droid X, iPhone 3G, HTC Thunderbolt(couldn't stand it, way too many problems/issues) and all of them paired fine and the data transferred showing name, place (work/cell/home) and the phone number in either numerical or alphabetical order.
View 9 Replies View RelatedDroid X was 2.2 (Froyo) - paired beautifully with my car's bluetooth - Address Book - display names and phone numbers perfectly.On Friday , August 5, 2011, I selected to upgrade to 2.3 (Gingerbread).Everything seemed perfect.New bells, new whistles.I received error message trying to text. I received unexplained promblems seeking access to the internet. I tried calling home and the error message surprised me. I was no longer active. I needed to contact Verizon to reactivate my phone. I asked why my phone was deactivated. I was assured my phone was not deactivated and was walked thru a "re-activation process". I have now done this twice in the past 5 days.My car's bluetooth has alos allowed me to viewed the phone address book by "name' of my telephone number, including the telephone number.First name, last name and telephone number. So, while driving, bluetooth enabled, select the name of the person I want to call, push the button and viola!... hands free calling via my car's bluetooth.Now that I have upgraded... No "name' is listed, only the telephone numbers. I met with my local Verizon sales support person. He was stumped.We deleted the pairing, reinstalled the pairing 3 times. Still no address book by "name"... Stumped.
View 2 Replies View RelatedHas anyone successfully paired a H680 with their iPad2/iPhone4 ?
View 1 Replies View RelatedCan bluetooth speakers and a bluetooth mouse not be used simultaneously? If I have music streaming to the bluetooth speakers, once I move the mouse the music stops until I'm finished moving the mouse and then starts playing again.
View 4 Replies View RelatedMy new phone is correctly paired with the blurtooth in my 2011 Subaru Forester and connected and worked, but does NOT auto-connect when I restart the car, I have to go into bluetooth settings on my phone, and tap the device "Car_Media" to make a connection. My previous phone worked correctly and auto-connected when I started the car.. I've fully deleted all devices and pairings from the car and the phone and re-paired the new phone several times. NG. How do I get the Atrix to auto-connect?
View 3 Replies View RelatedI have tried multiple times to pair my HTC One 7 to my 2014 F150.
The radio finds my phone, but no pin is displayed on phone for confirmation.. (At least I never see it).
Since the last HTC update about a month ago my phone will not pair with any of my bluetooth devices. At times it doesn't even recognize them.
View 8 Replies View RelatedI friend of mine just bought an iPhone 4S unlocked. He doens't have an internet plan yet, so I decided to pair my iPhone 3GS via bluetooth to share my internet connection. But to our surprise, neither of our iPhones could "find" each other. How can that be? I shared my iPhone connection with my Macbook, Mac mini and iPod touch by bluetooth pairing and it always worked.
Info:
iPhone 3GS, iOS 5.1.1
Have an iPhone 5 with IOS 7.1.2 and MBA with IOS 10.9.4I can not pair them via BTWhen the MBA finds the iPhone it sends the numeric code which is received OK by the iPhone.When I accept it the iPhone is listed as Connected in the BT menu of the MBA. For a couple a seconds.It then shows as not connected. In the phone the MBA is listed as NOT CONNECTED, of course.When I touch the MBA in the list of devices of the Bluetooth screen in the iPhone a pop-up tells me the MBA is not compatible. I have tried with airplane mode, turning BT off and on, and several combinations thereof with no result.
Info:
iPhone 5C
I have an E71 phone purchased from UAE and was working pretty well till i got the phone updated to the latest 510.21.009. The phone started giving problems thereafter.Initilly i found the phone not responding after installing whatsapp. I removed that program and the phone was fine. It restarts in between without any reason. The latest problem is that the bluetooth pairing menu is missing in the bluetooth option. It used to be a secondary tab on the right hand side of the main menu. Now its missing.
View 1 Replies View RelatedI have an iPhone 3GS running OS4. I recently purchased a Billionton bluetooth audio receiver that is supposed to connect with the iPhone through bluetooth and has RCA line-level outputs to connect into my stereo. The idea was to be able to listen to music on my iPhone wirelessly through my home stereo.
I cannot get the iPhone to "discover" or find the bluetooth receiver. I have connected wireless headsets to my iPhone in the past and all I have had to do was put the device in pairing mode and the iPhone would automatically find it once I entered the bluetooth menu on the iPhone. I tried my wife's Blackberry and it seemed to be able to pair and connect to the receiver without problem.
The receiver is a Bluetooth v1.2 compliant, Class 1 Radio. It supports A2DP. The model of the receiver is a Billionton GMHSBTAR.
I have no problem pairing my phone with my playbook, but for some reason it won't pair with the MacBook.
View 1 Replies View RelatedI am unable to pair my device to my new Ford vehicle SYNC bluetooth system. When I search for the pin number that SYNC sends me and I enter that number into the block the block directly under the pin number block reads "empty" so I have no way to send back to SYNC the pin they have sent me in order to pair my device to the SYNC system in my vehicle
View 1 Replies View RelatedSince I installed the latest build 2.1.A.0.435 I am unable to use my Sony headset MW600 with my X10. I tried calling myself or dialing out to locate the bluetooth button but have been unsuccessful at this moment.
View 2 Replies View RelatedI got my G3 back in February - within about a week of getting it, Lollipop came through & I never felt the need to do a factory reset since everything was working fine. But being the curious creature that I am, I've been wondering if anything would be different if I did a FDR, so last week I did one.
Tonight when I tried to pair my heart rate monitor again, instead of double-checking what password I needed to re-pair it with my phone, I guessed wrong. It's not coming up with an option to put in the password again, just asks me Yes/No if I want to retry after it fails.
Any way to get the "enter password" option again, without doing another FDR?
I just got my G4 and I'm having trouble with the Bluetooth pairing. I have a 2011 sonata and I can pair it fine but my it won't download my phone book, also when I have it dial a number it drops people. I got a Bluetooth stereo that won't pair with it keep getting a bad passkey or id number. These all worked fine with my G3 and had no trouble.
View 2 Replies View RelatedI purchased an Iogear USB Micro Adapter Model GBU421WM to try and transfer things from my computer to the phone.After updating the Bluetooth software and trying several times to pair my phone with my computer nothing would happen. It would sit with the serial number window up even after I typed the serial number in several times.I have tried making the phone see the computer and vice versa, and nothing has worked yet. Yet it does know the phone is there and the phone talks to the computer. Just pairing will not occur.So my question is: Is it even possible or am I missing something to make my phone/computer talk through Bluetooth.I have a StraightTalk Samsung R451C Phone.
View 13 Replies View RelatedI used to pair my iPad2 with my iPhone 4S (both iOS 5.1) using Bluetooth. Not working anymore.I can pair the iPad to a BT keyboard; 2) The connection was usually started from the iPad; 3) The iPhone doesn`t always find Bluetooth devices around (the other day, a rented car BT recognized my iPhone and I was able to pair them); 3) Both the iPad and iPhone do not find my iPod touch (iOS 5.1; 64 Gb)...
Info:
iPhone 4S, iOS 5.1
I have a different problem than I've seen here, all of the BT posts seem to be about difficulty pairing or having a phone and a BT device auto-connect.
My issue is that after connection... even after making calls successfully... my phone and my car will to stop communicating. Both devices continue to indicate they are still paired... but calls do not come in through the car, nor can the calls be initiated through the car's controls. Thusly, the stereo remains on (sometimes loudly) and I miss calls when the phone rings. The connection is gone, even though both devices never reported loosing it. This happens about 30% of the time when I'm in my car more than 15 minutes or so.
I have a 4S running iOS 5.1... this is my third iPhone and my last. It is the 2nd iPhone I've used in this car... a 2011 VW CC. I've also had no issues with other BT 4.0 phones, a blackberry and a samsung.
Additionally the genious bar has replaced my phone once already, even though they couldn't find any hardware issues. Subsequently they did a complete reset on the replacement, again finding no hardware issues. It was then set up as a new phone, and not restored from a backup. Volkswagen has tested the car's BT unit against their test iPhone 4 with no issues, even after leaving it connected for the duration of a 20k service.
Info:
iPhone 4S, iOS 5.1
I just purchased a Zoom 4322 (bluetooth adaptor) for my Canon iP100 printer. My MB pro late 2011 running 10.7.4. MBP saw the printer immediately and connected. However my iphone 4s running 5.1.1 doesn't see the printer with the Zoom 4322.
Info:
iPhone 4S, iOS 5.1.1
I am having some trouble trying to connect my E6-00 to some devices through Bluetooth. For those devices I get messages such "no device support" and "impossible to connect" after providing the password to pair them. At this moment, the device I am trying to connect is shown at E6 list as paired, but the connection is not possible. It does not happen to all of them.I installed all updates available through Nokia Suite, but the problem was not solved.
View 2 Replies View RelatedRecently purchased a 6760 slide and it does not seem to retain its pair on my car bluetooth. Previously had a blackberry and this worked fine everytime I started the car. Everytime I get in the car and want to use bluetooth I have to register the 6760 phone and basically start from scratch. I thought it may have been the technology in the car kit, but friend just tried their brand new blackberry and it connects and works fine all the time. The car kit is built into the car stereo so is relatively new.
View 4 Replies View Related