Motorola Atrix 4G :: Stuck On Red M After Pulling Update
Jul 22, 2011I am stuck on the Red Motorla M after pulling the Update.No LED's, I AM able to get into Fastboot etc.
View 3 RepliesI am stuck on the Red Motorla M after pulling the Update.No LED's, I AM able to get into Fastboot etc.
View 3 Repliesi updated my atrix to 4.1.83 and after it installed fine now i no longer have H+ only E for internet speed. "AT&T US HSDPA" is selected. anyone having this problem? my speeds used to be about 2500kbps - 3300kbs now im at 60kbs. apparently 4.1.83 increases speed for others by slowing mine down.
View 3 Replies View RelatedI recently updated my phone with att 4.5.91 update. My phone was receiving 4g speed before not it is stuck with edge icon and edge speed.
View 6 Replies View RelatedI've noticed that the volume does not change at all when output is the car dock. E.g. lowering the volume does not actually decrease the volume until you get down to muting the device (which does still work). There are no problems when listening through the headphone out, but I don't wish to negate the functionality of the rather expensive Motorola Cardock.This is a major inconvenience as it generally causes an ugly distortion and could damage my car speakers.
View 6 Replies View RelatedMy phone prompted me to upgrade to 4.1.83 and when I said ok, there is a notification icon saying "Download will start when connected to a WiFi network". So I connected to a WiFi network, the download did not start. Gave it some time, switched WiFi on and off a couple of times, powered off/on the phone a couple of times, still do not see it starting to download. I also tried to download some apps from android market place (on wifi) works fine, but the software update never starts. Or Is there a way to manually get the 4.1.83 update to update from 4.1.57 and load it to the phone?
View 2 Replies View RelatedGot sneak update to the stock music player? My player got stuck with shuffle enabled and hitting the shuffle button would shuffle the play queue and there was no longer anyway to disable shuffle. After reboot, it fixed itself but the shuffle button still shuffled the play queue. That said, I like the change. The shuffle function had an amazing number of repeat songs. Now you can go through a whole playlist without getting a repeat.
View 2 Replies View RelatedMy phone has been stuck in reboot loop for the last 2 days. I had powered it off on the plane and when i turn on...it keeps rebooting itself after the "Rethink Possible" screen ends. I let the battery drain and still after charging it keeps on rebooting. I am running the phone on "Safe Mode" and only able to run basic Android apps like Gmail, Phone, Gtalk, Camera, etc. All 3rd party apps in Safe mode do not work.
View 4 Replies View RelatedIt went blank after the "Rethink Possible" screen and the indicator light started flashing red. It did that for a bunch of minutes and then it rebooted again.
View 1 Replies View RelatedI let my phone's battery run out, after plugging it in the the charger for about two minutes, i turned it back on, and my phone has been stuck on the AT&T Rethink Possible boot screen. I have done a batter pull, and still nothing
View 2 Replies View RelatedMy Atrix is stuck on the dual core screen and wont go into recovery/fast boot.
View 1 Replies View RelatedThe phone asked me to update so I did. I wake up this morning and I get this. The phone is toast. After the download of the update it can't restart. It says: Can't boot 2 Starting RSD And the screen stays on.
View 6 Replies View RelatedI was able to connect to my macbook pro a few time last week, randomly, as i was having trouble getting motocast usb to open past the "loading content" screen. No it won't get past that at all, stuck on this screen for hours, rebootd phone, mac, reinstalled motocast. I've seen other having this load content issue also, how can we fix this? I'm using the motocast mac version downloaded from the website.
View 1 Replies View RelatedI've had the Motorola Atrix for a few days now and I've found out that when I compose an email or try to reply one using the default app it gets stuck in the Outbox folder. I didn't experience this bug with Gmail.
View 1 Replies View RelatedMy motoactv will not update. I used it running for the first time yesterday and the gps was lousy. I kept losing the location lock. I know the last update was pulled. Is there a way to get it to update to at least the first maintenance release.
View 1 Replies View RelatedJust notice my phone just prompted new update 4.3.13 available for download.My existing version is 4.3.10 Anyone know what are the updates in 4.3.13.My phone is from Singtel - Singapore, non-rooted, original rom.
View 5 Replies View RelatedI had my Xoom bootloader unlocked with a custom ROM. I was invited to be apart of the ICS test soak and proceded to reset my device to stock 3.0.1 and locked to bootloader. I am now stuck at Android 3.0.1 and my device will not update.
View 5 Replies View RelatedI was wondering if there was any word on the first/newest software update to the Motorola Atrix 2? I love this phone. I also loved the original Atrix, but with so many software issues on their latest update, and much complaining to AT&T that since Mototola's fix was to say forget it and make the Atrix 2, that should be my fix...I got AT&T to give me the Atrix 2 for free!!.Like I said I like this phone just as much as the original Iphone. So when I went in for my upgrade in August, instead of getting the Iphone 4 like everyone (and knowing the I4S was around the corner) I wanted something different. I get new phones all the time. The Atrix and Atrix 2 have been my favorites. I've had 0 issues.So if anyone knows if theres any software updates in the works, which im sure I get automatically anyway, let me know!
View 13 Replies View RelatedI have a Middle East Region Motorola Atrix with froyo 2.2.2 As Gingerbread is released in US few days back so Can anybody tell me when NON US ATRIX phones are supposed to be updated to Gingerbread and do i have to update it through Software update tool or OTA update.
View 13 Replies View RelatedYesterday I downloaded and installed the gingerbread update. Following instructions I changed the usb mode to whatever the setting was that I needed to complete the update via computer file transfer (mass storage mode?). After completing the update I sat and played with all the shiney new features until my battery died (oops) and now I can't charge my phone because I can't power it on long enough to change the usb mode back to "none" or whatever. Is there a way to override this or externally change this? Prior to the update the usb would default back to charging mode if the battery died, I am happy about the updates, but this issue is a HUGE problem. I hadn't installed the usb driver on my computer to charge via usb connection, and the phone needs to be turned on in order to initialize thisdriver, so I can't even charge that way. If there is no way to externally change this setting, what in the world am I supposed to do to get my phone to turn back on?
View 1 Replies View RelatedSince I updated to the Gingerbread operating system the phone does not recognize the USB to charge and the pc is telling me that it cannot recognize the device either. I have tried to update drivers, but that has not worked.
After the battery died, the phone would flash on the Motoblur screen for a few seconds. Eventually (after more than 12 hours of the flashing on and off screen) it did charge up, but I don't know how to keep it charged and I cannot connect or sync with the computer. It is not the cable, as I have the same issue with the car charger connected.
I was able to do a External Reset, but it still has the same issue. AT&T doesn't know anything about it and has offered no solution. What should I do? Everything was working fine before the update. Is there any way to restore the old operating system?
My phone has been rooted for ages, and I'm wondering if that has anything to do with the fact that I download the ICS update, reboot when prompted, and when phone boots up again, I get message box saying "Software Update Failed."
View 2 Replies View RelatedI had a phone update at around 10:00 P.M. on my Atrix 2. After installing the update, my phone auto re started. Since then it keeps turning on then off over and over and over. When I do manage to manually power down and start it back up I have no service and cannot call or text. My WiFi seems to work but thats about it? Is anyone else having this problem? What can I to solve this problem?
View 6 Replies View RelatedI received notification for updating 9 applications and finished with 3 of them. I closed the list of applications to check my settings. How do I get back to the list of applications that need to be updated?
View 3 Replies View RelatedSo I awoke to an update notification from VZW indicating that an OTA update was available for my D2G.I downloaded the update which took ~25 minutes it went through the restart and installed the software and then upon an auto restart after installation the phone showed a new M logo, transitioned to the pulsating droid logo and is stuck there.I've tried restarting the phone several time with no luck.
View 6 Replies View RelatedI try to update the phone by installing and running the Motorola Update Manager (I don't have wifi), after I start the process on Vista Update Manager found the update, downloaded it and start the update process.At 50% of the last step (I don't recall the name) the phone rebooted itself which I think it was part of the process. After restart windows give me a message "qhsusb_dload" windows cannot find the drive!So windows fail to recognize the device and phone gives me"Modem did not power UP (0) Starting RSD protocol support" with Motorola logo in background.
I tried resetting the phone to factory setting in recovery console and it fails.I tried running the update few different times with same resultContacted Motorola customer support, factory rest: FAIL.The only way I can start the phone is with choosing "Boot Android (No BP)" in recovery console. by doing that I can start the phone and load the motoblur and... there is no App installed on the phone and everything in the phone is rested already.When I check my phone status after booting by "Boot Android (No BP)" I see:IMEI: Unknow; IMEI SV: unknown; Baseband version: unknown; Build number: OLYFR_U4_1.8.3ystem version: 4.1.83.MB860.ATT.en.USMotorola WebTop version: OHWT_U1_4.257.30AT&T said that they are going send me a new phone and for now I'm using my old BlackBerry. I'm posting this to see if you guys have any suggestion/idea before I get my new phone
I completed an update on my Atrix on Monday morning. Since then I have not been able to view my pictures that I took before the update. Some of my music files will not play or are no longer visible. I do not have the option to set up the facelock option, I also do not appear to have a phonebook any longer. Was my update incomplete? Is something wrong with my memory/micro SD card? Or is something else wrong with my phone?
View 1 Replies View RelatedI lost my contacts with the update. I thought that I could use Motorala Media Link to sync the contacts with my PC (Windows 7) with Windows Live mail. Media Link does not show Contacts in its list.
View 4 Replies View RelatedRunning 4.1.83 update. Prior to this update, Skype didn't work at all. Just static for the folks I was trying to talk to. I just removed Skype. After the update I re-installed, Skype and great, it works. It's important as I talk to a friend in South Africa fairly frequently. Then I started noticing reboots / crashes. Phone just restarts, big old Red M logo advertises the fact the phone has just fell over and is restarting. I think I'm noticing a pattern. I've started leaving Skype running in background so I can get incoming calls from my South African friend. Every time that I've noticed a reboot, Skype was running. It could also be related to poor signal strength. By the way, I'm using Skype over my WAN data, not Wifi. Is there a way to get a crash log from the system.
View 2 Replies View RelatedSo i download an update for about 4 hours, it crashes at least twice in the process, and then when everything is finally working, I notice my contacts are completely gone. The ones that sync from facebook are fine, but I don't care about those. Lots of them are gone though. I have no idea what they were saved in before. What account... etc. This happened last time i updated the system, but i had my old phone so i just went to at&t and had them add them all. i didn't think it would happen again, but IT DID!
View 5 Replies View Relatedhow long the software update v55.13.25 is supposed to take to download? Even though my phone has been consistently connected to wifi, it still hasn't downloaded.
View 1 Replies View RelatedI installed the OTA 2.3.6 update last night and now my phone never shuts the screen off automatically. I've tried resetting the timeout period, but no luck. Something is keep it awake after the update.
View 3 Replies View Related