IPhone :: Needed Bluetooth Code For 4s?
Apr 22, 2012my husband's Nokia N97 asked for my iPhone 4S' bluetooth code. Please advise where can I find this code/pin.
Info:
iPhone 4S, iOS 5.1
my husband's Nokia N97 asked for my iPhone 4S' bluetooth code. Please advise where can I find this code/pin.
Info:
iPhone 4S, iOS 5.1
I am running Vista with Black Berry Device Manager 5.0.1.11 and BBDevMgr 4.1.0.12. I am using the latest Microsoft Bluetooth drivers.
I can connect once and synch several times with my Blackberry Bold 9000. But as soon as I disconnect once, the Device Manager does not connect anymore when trying again.
I do recognice in the Bluetooth status window - both on the BB and Vista - that there is a short connection and breaks again. That repeats all the time.
If I try to search again for the BB, it is not found anymore. It is still registered in the Bluetooth devices but the Device Manager does not find it anymore.
Deleting the entry in the the Bluetooth device section does not help. I do have to do a reset (battery out or the alt-shift-del key) then I can reconnect once again.
Someone does have the same problem?
I am quite sure that the problem is in the Device Manager (not the Desktop Manager) - but it can also be a device software and / or hardware problem.
What is the bluetooth pairing code of IPHONE 4?
Info:
iPhone 4, iOS 5.1.1
I have lost the PIN code for my bluetooth headset so I can't pair it with my new Curve. how to get the code or reset it?
View 1 Replies View RelatedI have previously paired my Tour 9630 with my Widows 7 laptop. At one point, Windows 7 prompted me to enter a pairing code or let it generate one for me. I foolishly let it generate on and got an archane 8-digit code which I entered on my BB and connected.I was fixing the driver issue and was instructed to remove my laptop from the list of devices on my BB. When I tried reconnecting, it asks me for a pairing code. The code it generated previously didn't work. I've even tried 0000 and other possiblities. I did finally get it connected by deleting on the PC and reinstalling it and the manual drivers. But this is a lot of work.What I cannot find out how to do is to change the pairing code for my Windows 7 laptop to something I'm likely to remember!
View 1 Replies View RelatedI am having problems syncing a Nokia E71 with a PC running Vista.The two sync just fine via USB cable.And I appear to have successfully paired them via Bluetooth.However, when I try to sync over Bluetooth, I get
- two requests on the E71 to accept a connection from the PC - both of which I accept
- a long wait - around 2-3 minutes
- another request on the E71 to accept a connection from the PC, which I also accept
- another 1-2 minute wait
- a message appearing on the PC saying "The connection between the PC and the phone failed, error code 0x80044403.I can get both the PC and the E71 to transfer files with other devices over Bluetooth.And I can see the E71 as a Bluetooth device from Windows Explorer on the PC. Though when I double-click on it, I can't browse the content.The PC is running Vista Service Pack 1.The Bluetooth hardware is an HP integrated modeul with Bluetooth 2.0 Wireless, manufactured by Broadcom.The Driver date is 19/06/2007 and the Microsoft Bluetooth Enumerator.The E71 is running the -400 firmware, freshly updated.
I can send or receive data to only nokia phones. I can search the other mobile through Bluetooth but when I tried to connect (send or receive) which will ask for a verification code like 6 digit numbers like xxx xxx.
View 2 Replies View RelatedI want to connect my xperia pro to my car audio system. (Bluetooth of my car audio system has a pairing code) when I want to connect, the page of entering pairing code not appear and an error will appear in screen ("wrong pairing code").
View 4 Replies View RelatedIs there a way to connect to a bluetooth device that requires a code to be entered? I am trying to connect to my Microsoft Sync radio so I can stream music. The MA detects the Sync but when I click on it it just says connection fails. The Sync requires that you enter a code so I assume this is the reason for the connection failure.
View 1 Replies View RelatedI recently had a repair done to my iphone. Afterword, I was told that I had to restore the os. I downloaded and installed the latest version (3.1.3) through itunes.
When it attempted to activate the phone I got an error message saying the phone either had no sim or the sim was locked and instructing me to disconnect the phone and unlock the sim.
My sim does have a pin, but the phone itself won't allow me to unlock it. It says 'restore needed' and directs me to itunes.
It seems like a catch 22 - can't activate without unlocking the pin, can't unlock the pin without activating. As it is, I can't use the phone at all.
I have pictures on my iPhone I'd like to print.I went to Walmart and was told I need an app to do it, anyone know what app? Or was the guy wrong?
Info:
iPhone 4
do I need to sync my iphone to my computer for updates?
Info:
iPhone 3G, iOS 5.1.1
My home Button is working when I need it to work, is this normal wear. How do I fix the problem?
Info:
MacBook, Mac OS X (10.7.3)
My wife and I both have iPhones and use the same iTunes account and pc but need to keep our contacts and calendars separate.At the moment we seem to have merged both.How do we keep these information files separate?
Info:
iPhone 4, iOS 5.1.1
One of our users has an iPhone 4 with iOS 4.3.5. Their PC at home which they use to synchronise music, photos, etc is broken and they need to upgrade to iOS 5.1, which I could do here in the office, but iTunes says "all content" would be lost.How can I update their iPhone to iOS 5.1 without losing any content?
View 1 Replies View RelatedSo suddenly my iphone told me it could not emit or receive calls and that I needed to restore the phone; this I attempted to do, following the apple site's instructions - recharge for at least half an hour then hold down (various) buttons to get the broken apple image; so far, so good. However, nothing ever progressed beyond this point and now three days on, I am nable to elicit even the apple sign from the phone.
View 1 Replies View RelatedStarting tonight (4/28/12) attempts to download an app (free app) result in requests for "confirmation questions and answers" but these questions are not asked when obtaining the same app using iTunes on a PC.This occurs after the password is requested and entered, but it really smells like phishing, especially since the same is not asked within iTunes on the PC for the same account.I tested with attempts to download other apps and the same thing happens after the password is requested.this is a new and valid requirement, there needs to be an option to meet the requirement on a PC in iTunes because of the difficulty that some of us have inputing info on a iPhone or iTouch.
Info:
iTouch iPad, iOS 4, XPPro, Windows Mobile
My iPhone stopped charging right after it said I needed to update to the 5.1.1 software. Anyone else having these problems. I had my phone plugged into the charger it was on like 20 % it charged up untill it said I needed to update my software to 5.1.1 and never charged from then on. I tried different chargers and even brought it into apple. They were no help.
Info:
iPhone 4, iOS 5.1.1
I can't find the files needed to sync my iphone to a new computer
Info:
Dell Inspiration 1521
I am using iPhone 4s but when am downloading any apps it remind me to Have ios7!where can I get it?
Info:
iPhone 4
update:720tube ftw. no extra service signup required http://itunes.apple.com /us/app /720tube /id384615002?mt=8 update 2:defiantly works! the app says it can take up to 15 minutes for Internet to process the video, but it only took 2 or so. here is a clip:http://www.Internet.com/watch?v=ryan7bnnc8k&hd=1 update 3:video link in update 2 looks amazing on my ipad. original post anyone know of a good app for uploading 720p video directly from the iphone to Internet? the iphone only sends it in standard def.i dont like pixel pipe since it wants you to signup for their service.
View 24 Replies View RelatedIs there an application or way to lock an Iphone to edge and then switch to 3g as needed? On my Windows Mobile phones I can run an application called Bandswitch which lets me select whether I want a 2g or 3g connection. Since the Iphone doesn't have stellar battery life to begin with, such an application would really help me conserve my power usage.
View 5 Replies View RelatedDo you know a good app for texting that you can type in English and sends in Spanish?
Info:
iPhone 4S
Performed software upgrade on 3GS but this crashed it and needed to be restored. Since restoring the phone it will not activate and states that there is no sim card inserted when there clearly is?
Info:
iPhone 3GS
My iPhone 4s has been non-functional for 5 hours now... It is stalled during the new software update at about 20% complete . I cannot do the typical hard reboot due to a broken lock button. I have tried plugging it into a power source with no luck. I have no way of turning it on/off and cannot currently use it.
View 1 Replies View RelatedI get an error code come up when trying to syn my calender code is 0x80040fb3.
View 1 Replies View RelatedI have a Nokia Lumia 1020 that is rejecting the code when I enter it in the pin code box but the mayor problem is that the attempts are not wasting. It does go lower than the 9th attempt. I already tried rebooting it and factory resetting it and the phone it goes back to the 10th attempts and again it doesn't go any lower the the 9th attempt.
View 3 Replies View RelatedI have Nokia E-71. I can print photos using HP iPrint downloaded from ovi store.I have HP 7210 all in one printer which can print from the laptop conntected to the wifi.i have tried diffrent setting on E-71 but in no avail.
View 4 Replies View RelatedMy N73 worked correctly until 3 week ago,suddenly i see when i press button 2, it write 7 ! and continue whit 887734... !then i reset it by code " *#7370# " but problem not solved !i tried 3rd time but the problem was existing yet !Then I opened the keypad and clean it, and restarted again,it worked and all of keys was correct. i set a lock code, and it was working true,until yesterday. Since yesterday, it didn't work , I get my IMEI to a site, and it gives me a ten digit code that calls master code, and said if I enter this code instead of my forgotten code ( I didn't forget it,it didn't work) it will accept by phone. But when I enter the master code it says "code error" too. I tried to hardware reset , but when i hold 3,* & green buttons and turn it on, phone asks me "continue using the phone in offline mode? " (it asks since when i tried to enter deference codes for several times), and i should to answer this and press other keys instead of these 3 buttons, so it didn't work too, I opened it key pad and clean again,but it couldn't help.
View 4 Replies View Relatedi have a nokia x6, and having issues with the maps and more specifically the starting point. every time i start up the maps, there is a little red dot on one point, seemingly the starting point. and it will not change to were i am now. i am 2 miles away from were it is saying i am, and just will not update.
View 4 Replies View RelatedI have finally solved the issue of setting you the BBC iplayer so it asks you how you would like to connect when you run the application rather then it always by default connecting to the service provider in my case (orange).
Step 1 - download the newest software update for the N97 you will need software version V 20.0.019 software version date is 13-10-09.
Step 2 - download the latest BBC iplayer version this should be version 2.5.0(141).
Step 3 - from the phone go to menu then go to web once opened go to options then settings once in settings go to general and set access point to ask when needed.
Step 4 - from menu go to Videos & TV go to option in Video and TV then settings and set network connection to ask when needed if its not already set to this.
Step 5 - from menu go to settings then connectivity then destinations then internet and set your required WIFI connection to priority 1.
Step 6 - from menu go to applications then open realplayer then settings then go to streaming settings then network and the access point in use should display your required WIFI connection e.g. mine shows my home network talktalk. If your required network is not displayed then open the access point in use and select the required WIFI connection.
Step 7 - turn your phone off and take out the battery for 2mins then turn your phone back on.
Step 8 - when the phone turns on and the phone displays select connection you should see internet underneath it should be displayed your WIFI connection. Do not select anything. Instead go to options then go to select access point and choose your service provider e.g. orange Internet.
Step 9 - once your phone is set-up and all widgets are set all you have to do to use BBC iplayer is go to options on the home screen select content to offline mode then content to online mode then open the BBC iplayer. The phone will then ask for a connection select your wifi connection and your away.
i hope the above steps help you and work as they worked for me just remember after you do the 8 steps above you only need to repeat step 8 everytime you wish to use BBC iplayer.