IPhone :: 3GS, Works Only Connected To Power Source?
Apr 23, 2012
I have a problem with my iPhone 3 GS. I have bought it two years ago. Since december 2011 a have a problem with it. Whenever it is stressed (loading websites, opening an app, searching network, sending an imessage,...) it simply turns off. I am not able to turn it on without connect it to power source. The display is black and if I try it to turn on there is the apple but then it turns black again. After a few failed attempt there is the simbol of no battery again (before turning off there was enough). Then, after connectet it, it turns on and behold there is enough battery again, for example 60%.
I cant turn on my Iphone 4S even conected to a power source .... when I conected it to my Itunes says that its in RECOVERY MODE ... What is that ??? Then I try to restore but always appears a messagem saying that an Error Unknoking 1600 ???
i was on instagram and i was texting one of my friendsand then i went downstairs it was perfectly fine when i left it in my room. Then i came back up to check instagram again and it wouldnt turn on. This had happened before but it came back on after like 1 hour but i really need my phone. Even i plug it into the charger it wont come back on i had at least 60% of battery when i left it. What should i do?
When I plug in my iPhone 6 Plus to the USB and connect as iPod, I cannot play music I've selected through my vehicles infotainment system. I have a 2013 Honda Accord. All previous versions of iOS have worked almost flawlessly in this car and my last one. However, since purchasing the iPhone 6 Plus, I have had nothing but problems with using my car as an iPod connecting to the audio system. Sometimes it just says "loading"... this flashes back and forth, but it never loads. Other times, it will load, and I can browse my music and podcasts.
However, when I select a song, it will not begin playing. I can go to the "Now Playing" section of my Music app and see that the song I had selected has been chosen, but I have to click the play button on my iPhone to make it play. I have Siri Eyes free, and it construes to work. However, Siri seem to be getting less useful all the time. This whole issue has really got me upset. I paid $1,000 for this phone. It is supposed to Just Work.
I assume it is a software issue; I wish the would get around to fixing it. I, personally, find this unacceptable. This is a core function of the phone. I don't really care about health apps... Apple Pay is cool... but they should not do a single thing that messes up the core functions of the phone. Being able to connect to my car and listen to music is why I paid Apple's ridiculous price to upgrade to 128 GB or RAM. This is like upgrading the software and not being able to make phone calls for 3 months until they finally release some random software update.
Unable to see Wi-Fi status after connecting to power source. After tapping Settings > General > iTunes Wi-Fi Sync, the message reads: Sync will resume when "R300764AHWR001" is available. how to sync my iPhone 3G to ITunes,
i have collected probably 15 different chargers the last couple of years that I use at various locations to charge my Blackberry, iPhone, and a couple of Samsung Google Nexus Phones. That is every device other than the BlackBerry Bold 9900 and the Torch before that. I get the familiar message "the charging source connected to your blackberry device cannot charge your battery", except when connected to RIM manufactured charger or fortunately the USB port on my laptop. How in the world can every phone other than RIM's Blackberry take a charge from the various power sources without problem. I had the problem to some degree on the Torch, but figured RIM would catch on and get it fixed. Now I have the new Bold 9900 and it does not even work on my trusted 12V car charger. If 4 or 5 different devices work with multiple chargers and the Bold 9900 does not work on any it has to be a RIM and BLACKBERRY problem.Maybe the guys in Waterloo are just totally insulated from the rest of the world and only own BlackBerry phones with Blackberry chargers and believe there is not a problem. At least it appear that way with this charger issue and several other issues, but I won't get deeper into that here?
Getting quite frustrated with this phone now. I've had my BlackBerry Curve over a year now, and I'm on a 2 year contract with Orange. But I've had this problem. My phone will be fine when it's plugged into my computer or my charger, but when I take it out and start to use it, sometimes within 5 minutes, sometimes within hours, it can come up with this whiteness filling the screen. This leaves me with no choice but to take the battery out.
Then after that it refuses to turn on until I plug it in again. This is annoying me to the extreme because I can spend hours waiting for it to charge, then when it's fully charged I'll take it out, go out, put music on or something and it'll go off yet again. Sometimes it can just cut off without the white screen. Even then it won't turn back on without a power source. I've tried updating the software and that won't work.
I upgraded to Lollipop 5.1.1 recently using Sony updates. However I am having a strange problem now. The phone shuts down when pulled out of a power source though battery status is above 80%. If I plug back the phone into a power supply and restart, I am able to use the phone without any problem. Is my battery dead? It has been about 1.5 years now with this phone. Tried restarting in safe mode as well but the phone still shut down when pulled out of power supply.
I updated my Bold 9700 OS to 5.0.0.862 about 2 weeks ago. Everything was working fine up until Saturday, charging 1 minute then the next nothing, tried wall charger, car charger and also through the computer...nothing . This is the message the phone displays "The charging source connected to your Blackberry device cannot charge your battery."
The lightning icon is there but the battery level does not increase.I cant downgrade the OS since the computer doesnot recognize the device, I constantly get an error message. "Usb device has malfunctioned."
iPhone 4 Power button no longer works. 2 Months out of warranty, I haven't got $179 to replace it? I have attempted self repairs, made the situation worse.
Dropped my iphone4 in the toilet bowl. Now everything works except the power button. Will this issue be fixed automatically after the internal parts of the phone are completely dry?
I was on instagram and it froze I hit the power button to put it to "sleep" and I tried to open it back up and its been stuck at a dark screen. I tried holding the power button in order to reset and nothing happens.. When I press the home button siri turns on but I can't get anywhere with that either.
My Blackberry curve 8520 only works when it is connected it wi-fi and I am on as pay as you go with vodafone. My Twitter And BBM doesnt work and especially when im at school and i want to check them,it doesnt work. Also My wattpad doesnt work and it said that its unable to connect to the network. When im at home it doesnt work either.
If I try to power down my Lumia 900 while connected to my pc usb, it shuts down, the battery charging image comes up briefly ,then the device powers back up.I use the pc to charge, but don't need the phone on, right now. Is there something that needs to be changed?
Since I upgraded to 5.0, everytime I connect my Tour to A/C power, the screen changes to an analog clock. Isn't there a way to defeat this from happening? Also, when I connect to my computer via USB, I no longer get the message asking it I want to use it as a USB device or not? Is this part of the upgrade?
I have recently upgraded from a 9650 to a 9930. Everything is fine except that when I have the device locked (via the new, inconveniently placed lock button) and plug in a power cable the phone unlocks. How do I disable this? Maybe I am the only one who is annoyed by this but what is the point of a button that locks the phone until you unlock it if other things can unlock it. It wouldn't be a problem if not for the touchscreen which I always seem to be pressing at the time I plug it in.
Sometimes when I need to reboot/reset my i760 (Winmob 6.1, Spb Shell) it will not finish the boot cycle. I turn it on, I get the Samsung logo, the dark blue static Verizon wireless screen, then it about a half a second into the next screen (where the Verizon wireless logo "floats" down to a light blue screen) the system powers off. You can just see the red check in the logo start to draw and head down and the system just goes off.I thought I had solved it by pulling the battery for about 30 seconds, but now that doesn't fix the problem anymore. The only way to make the phone power on is to connect it to a power source (charger or cradle). Then it powers on normally.It does not matter the charge on the battery at the moment - I've had it do it any charge level, including 100% just off a overnight charge. This battery will normally last me 2 days of hard use.Any ideas?
My phone has been acting up since installing the latest iOS 7.1.1. The back lighting for the screen works intermittetly. I have been able to get it to come back on by turning the phone off and back on, but not every time. Once I enabled VoiceOver through Siri and turned ScreenCurtain On and Off. Other times, just clicking the home button and a few times on a notification that would turn the back lighting on. The phone seems to want to respond to turning the back lighting on, but does not do it every time it should. It usually takes 10 - 30 minutes of me working with it to get it to come back on. The phone has not been dropped and is in an Otterbox case.
Windows 7 64 Bit does recognize the iPhone4 although. What the title says. i have 2 ipods that do appear in the itunes list however. (Windows) I have tried all the available troubleshooting measures. so please do not link me to the 3 standard trouble shooting websites Also my iPhone4 does appear in my iMac's source list. (Mac)
My iPhone 4s won't connect to my car head unit it comes up connected and then half way thought it comes up as not connected and when I try to connect again it come up as device is out of range even when the phone is right next to it?
My iPhone 4S (iOS 5.1.1) no longer displays the audio source selections after successfully connecting via Bluetooth in my car. It appears that the Sources button has been replaced by a FaceTime button that I have not activated. Any suggestions for correcting this so I can talk hands free?
My iPhone is on the Bell network, along with 3 other iPhones in my household. We have WiFi and the phone indicate that they are connected to the WiFi when we are in the house. However, my bill from Bell indicates several instances where the phones (all 4 at different times) are connected to the 3G network for 24+ hours at a time. Additionally, it shows the phone connected twice during that time period (as though there were 2 different sessions at exactly the same time, but with differing amount of data connected)
The explaination that Bell gives me is that there are 'minimized' applications still working on 3G even though the phone says it is on WiFi, and that each of these opens its own 'connection'My understanding of cell technology is that the phone can only access one method of Internet connectivity at a time, and that it can be explained as a 'pipe' or 'straw' carrying connectivity and all of the data. I have never heard of a phone that can access two different types at the same time, nor one that uses separate 'sessions' at the same time of either type of connectivity.
I would assume that I turn on my phone in the morning and I am in my house, it indicates WiFi, so I can browse the web, collect my email and update my Facebook on that 'session' that lasts 4 hours until I leave the house. Now my 3G kicks in and the email that I still have open now collects through the opened 3G session, as well as the page I left open downloading something.When I get to work and enter my WiFi area there, the session would then collect my email through WiFi again, and my download as well.
I would like to make a random-generator. I've do it with numbers from 0-10 and thing like that, but would really like to make a interval-generator, where you can write two numbers, and then see a random number between the two written numbers.
