I just updated my bb to the newest bundle. However all my languages have changed, I have korean thai, and bahasa indonesia. The update deleted english, french, and spanish. How can I add them back into the language section?
I recently updated my torch 9800. The Bb desktop successfully dowloaded all the modules. Bet when it automatically rebooted, it hangs halfway and received an error that the PC cannot communicate with the BB because of the obvious reason.
I had no choice but to disconnect the BB from the PC and remove the battery and back so it can boot properly.
It seems to be working properly with the previous software (not the 2475) I hope the download did not do anything to make it work improperly.
for sure blackberry tested this update before giving it to consumers but I am just wondering why this issue happened.
I saw that there is an update to the software for my new Torch, and I tried updating the other day and did the same as a few other people I've seen on the forums, namely freezing after the phone reboots and the desktop software telling me that it can't connect to the phone.
1. Is it worth trying to make the update work? What has been changed and/or optimized between the 2 bundles?
2. Would anyone be able to give me some advice on updating the software (if it's worth it), so it doesn't end up freezing halfway through again.
Given that problems are routinely experienced doing any BlackBerry device or desktop manager updates, has anyone installed this update and if so, has it created problems? And if there are problems, what are they?
After updating to 2647, I can't find the password keeper, doc , PDF and spread sheet in the applications folder. Those applications are really important to me and I don't know what is the problem, is it the new software doesn't have those applications or some kind of an error during the installation of the software.I really need those apps ,degrade to the previous version or reinstall the same version again.But I don't know how to do the both. step by step instruction from where to download the so and how to install it to the phone.
I tried to update my BB torch 9860 using OTA from 7.1 bundle 1149 up to 7.1 bundle 2016. After update was successfully finished, I noticed that the screen on BB has changed. All icons became very small or missing. The phone is working, I can accept calls, but cannot dial because cannot access the dial pad. I've tried to downgrade to the previous version, and after successful downgrade, at least that what's was written, the problem persist. If I try to access some applications the screen shows: uncaught exception: Bitmap invalid (null). I cannot access Application management. The phone constantly get stuck on one screen for a long time....
Running version 6.0 Bundle 695 and tried to update to 6.0 Bundle 2342. Update hangs at "downloaded modules 429" and stops. Eventually, the update fails due to an internet connection failure and asks to retry. Tried using the desktop software to update and the BB website update. Both failed multiple times at the same point in the process.
I have a red star on the "Software updates" icon on my BB Torch screen. When I click on it, I get the information "Version 6.0 Bundle 2391. Perform Update". But when I go to update, I get the message "This update includes enhancements to your Blackberry Device Software. If you download it over the wirlesss network, charges may apply." hat is this update and do I need it and why are there charges?
I just updated the operating software on my Torch last night as I went about doing other things. It remained plugged into my laptop overnight, during which time the laptop went into sleep mode. When I opened up the screen this morning, the BlackBerry dialog box said the update was completed successfully; however, I have been unable to turn the phone on at all. I get no lights, no sound, nothing!
I recently updated my Bold 9700 (on T-Mobile) to OS 6.0 via a manual download beacuse when ever i try updating with my desktop software or device software they get to module 394 of 501 and it stops downloading. now i have deleted all loader cache and history and tried again and got the same result. i am using a dongle to download the update on my laptop and wondered if that could cause a problem. i downloaded 6.0 manually off another website but i was bundle 1879 and still requires an update to bundle 2534.
Torch 9800 on AT&T V6.0 Bundle 2647 Free Space 268.5mb
I recently updated to 6.0 bundle 2647 and since updating I have had several random freezes of the device while doing nothing. I keep the device locked with a short password, and then in a holster most of the time. I have had the situation happen about once a day, very random, where I would pull it out of the holster and try to access it by pressing unlock or sliding it open and nothing works. No response, just a display of the lock screen (no pwd input) and clock of the time when it froze. This is very frustrating and I'm getting ready to downgrade to the previous version.When it occurs, it's usually been idle, not running any apps.
I can't connect to my car's (2008 Range Rover Sport) bluetooth ever since I've updated my AT&T BB Torch 9800's OS to the 6.0 bundle 2342. I was hoping this recent 2647 would fix the problem but it unfortunately has not. I had no problems connecting to my car's bluetooth until the last 2 updates.
I just updated my DM to version 6.0 bundle 2949 and find that it doesn't offer me Yahoo anymore to sync in my organizer. All I'm offered is Windows Contacts, or icalendar for calendar and tasks.
The last update I installed lost the calendar sync option, but I have lived with that. But this is way more important to me. I saw forum advice to the effect that version 6.1 supports Yahoo.
I have tried several times to load this upgrade by both apploader and desktop software. Apploader states that the update is not available from this server, the desktop software downloads it but hangs during the device backup. I have even tried to do a backup from the desktop software and the backup hangs too.
Dear Gurus I have very big problem with my BB 9900 current version 7.0 Bundle 2395 (v7.0.0.579, Platform 5.0.0.735) UAE Du/Etisalat Carrier, i canot update to )S 7.1 there is no available update in desktop manager also downloaded firmware from carrier install manually used jl comander , crackutil, load tru aploader remove vendor all hidden files same issue. why there is no available 7.1update for my BB..
I have update software bold 9780 to 6.0.0.863 and now I can't opened excel,words,ppt,how can I back to previous os 6.0 bundle 2115?or what can I do to opened excel,etc again?
My son received message this morning on his phone saying it needed updating, he started the update. It is only on 13% now, saying it is backing up his data. Has said this now for 11 hrs. We can't do anything with the phone, it wont go off this screen. We've tried taking battery out an restarting phone but when it comes back on the same screen comes on again.
I get following error message whenever I try to update software of my device the application "help" cannot be loaded, because it requires following applications that are not available:net.rim.java.browser?
I upgraded my Torch (9800) a week ago, and have been noticiing battery drain issues. The problem is NOT persistent, but is happening most of the times though. I am currently on OS v6.0 bundle 3049 (v6.0.0.706, platforn 6.6.0.246). My Wifi and Bluetooth are always OFF. Only using the Bell network, for which I have all the 5 bars available. . I have investigated further, and I found that the Blackberry System Software was the one running with the highest CPU - usually in the high 70s, to even high 90s. And this was consistent over hours, until the battery was dead. I have since removed any apps I suspecpected - such as Nice Office and LinkedIn. But the problem still persists.
Battery pull has been done multiple times, as well as I have checked, and there are are no OS updates available.
Now, currently, only the basic apps are loaded (Alt-Back) : Home, Messages, BBM, Phone, Borwser. All other apps are closed or exited.
Investigating further into the modules within the BB System Software, I have found that the net_rim_io_impl, is the one consuming ALL of the CPU. I am not sure where/what this module does - so I am unclear on what service within the BB I can turn OFF to get rid of the issue.the CPU for the System drops a bit, as Options uses up some, else, it goes back to 90s, if left alone with either a fix to the module, or else, via some workaround, wherein some service can be stopped or some setting can be changed to avoid this battery drain.
My torch 9800 was working fine, upgraded to 6.0 Bundle 2949, and it synced a few times, and now It will not sync. It goes 1/2 way through and then I get the error message "Sync Error-Invalid record ID" "An error occured during an attempt to access a device database record.
I've all ready given up getting all of my palm addresses into this device, but now I may loose all of my contacts between my computer & phone I have...
Tonight I updated my software to v6.0.0.526 and when I started back up my wallpaper was back at default and my media was wiped. I can't find my pictures and I also can't identify them in my device backup.
I upgraded my Blackberry Torch earlier today (13:51hrs) only to find that all my email accounts have stopped working. They will not verify even though he account passwords I am using are correct, and the mobile will not let me delete or add any new ones. is my only option to completely factory default and start from scratch as i can not find a way to remove the "dodgy code" from my now useless
I am trying to upgrade my BB torch 9860 OS version to 7.1.0 bundle 1646, But unable to do.I try to upgrade using the aploader as well bb desktop manager.
I recently upgraded the OS on my Torch 9800 to OS 6 bundle 2647. Everything seems okay except that the passwords that were stored in my SplashData app are now gone. Is the data file still on the phone somewhere or can it somehow be recovered?I did not back up the phone with the Desktop manager before the upgrade.
i've been having issues with my bb torch 9800 (6.0 bundle 2647), randomly shutting down. when i finally get it to turn back on, it reboots.i've tried working with at&t tech support for a solution, but nothing we've tried has worked long term, and it's very frustratini've tried:soft resets (taking out the battery while phone is off)hard resets (taking out the battery while phone is on)master reboots (wipping phone clean of all data and software, then re-installing software)i have very limited media/apps on my phone, yet, this issues keeps occurinfree memory: 315974563 bytesapplications installed: at&t code scanner 2.0.14blackberry app world 3.0.1.29blackberry maps 6.0.0.32blackberry essenger5.0.2.12blackberry podcasts 1.5.0.28browser 6.0.0bubble bash 2.0calculator 6.0.0calendar 6.0.0clock 6.0.0contacts.0.0email setup application 6.11.0216.1323facebook 20.0.50file explorer 6.0.0google maps 4.5.3google talk 2.5.108help 3.0.0.32home screen 6.0.0media, memopad, mesages, options, password lock, phone, setup 6.0.0slacker radio 3.1.152social feeds 1.0.0.58tasks 6.0.0twcrtfree 1.5twitter 2.0.0.16visual voice mail 3.0.0.129voice dialing 6.0.0Internet 1.0.0.40
I have a message asking me to Install the Version 7.1.0 Bundle 1133 software update. Priority: Critical. 95.4MB. It says it will take 2 hours with no phone use. That's fine, so I've clicked it to do it's thing, and nothing really happens, apart from it "Verifying update..." and occasionally the little clock face pops up on top of it. Then my phone just goes dark and restarts. On restartating it displays the following message "Uncaught exception: no application instance".My mobile is not plugged into my laptop during this process.I have deleted applications like facebook and whatsapp from my phone to give it more MBs of space. Why won't it work?