I just updated the operating software on my Torch last night as I went about doing other things. It remained plugged into my laptop overnight, during which time the laptop went into sleep mode. When I opened up the screen this morning, the BlackBerry dialog box said the update was completed successfully; however, I have been unable to turn the phone on at all. I get no lights, no sound, nothing!
I just updated my bb to the newest bundle. However all my languages have changed, I have korean thai, and bahasa indonesia. The update deleted english, french, and spanish. How can I add them back into the language section?
My phone told me i had to update it to new software.So I connected it to my computer (running win7).I started the nokia phone update software, which correctly identified my phone etc. It told me it was normal it could say the phone got disconnected.After a few minutes, it told me my phone was disconnected and I had to unplug it, unplug battery, put everything back in and press power for 1 second to resume updating. That doesn't workHard resetting with shift + space + backspace also doesn't work. The phone vibrates for a second and does nothing. I do see a little red light inside the navi-pad.
My blackberry torch seems to be a bit faulty in some way at the min , I've recently purchased several batteries for the phone, all of which working perfectly when I leave the shop, when home I charge them up to full and use it as normal no problems. I continue to use the phone until it completely runs out of charge but when it comes to charging it again it shows a battery with a Red Cross through it and after reading other comments of just leaving it to charge I did that but nothing happened so went back to the shop they tested the battery only to find it completely unuseable and me having to buy a new one.
My Blackberry Torch will not power on. It was working today with a slight delay and in attempt to speed it up I attempted to power off and was unable to do so. I then took that battery pack out but was unable to power back on at all. The battery is fully charged.
 After starting the updating setup via Sony PC Companion this program told that at time my PC is preparing (and it will take some time) itself for updating I can disconnect my phone or not, so I disconnected it and then I pluged it in again. Phone started to update (it turned off and started updating) and suddenly communique came out telling me that my phone is no longer connected. Sony PC Companion told me to unplug it and restart, after that my phone keeps restarting all the time.Â
Got the phone in trade, so no warranty...Phone works perfectly fine before any of this happens. Basically got the nokia software, updated ect. Go to update the firmware and do what the instructions says. It downloads the firmware and starts to install...halfway through says cable disconnected. Clearly it is not, but i do what the instructions says to reconnect it. It tells me to disconnect, take out batter, reinsert usb then battery and then hit retry. Works, but same problem, halfway thought it "disconnects". After trying this about 5 times i give up. I hit cancel. Now the phone is dead, nothing, can't hard reset, can't turn on. NOTHING.Currently have the phone without battery as someone online (googled) had similar situation and he left the phone for 6hours and it magically worked again...i don't think it will work but i have to try...
I can't get into my xperia z3 after downloading the new update. I did it yesterday (24/7-15). It only says that Android is starting and that the phone is optimizing apps...after a while my phone doesn't work at all or just restarts again.
Latest official update 2.1 (UXP update)It's for X10a but works just fine with X10i go here and download the X10a-2_1_A-_0_435_EW.ftf file [URL] download FlashTool 0.2.4 [URL] Install it inside there will be 5 folders?
I plugged my Torch in overnight to charge. When I woke up in the morning, the phone would not turn on so I took the battery out a few times and tried to reset it. When I plugged it into the charger and tried to turn it on, I got the battery symbol with a red X through it.
I've updated my N97 wth v2.2 about a week ago or so. There was no problem updating. After the udate though, i started experiencing some problems. The phone kept restarting itself. As it restarts, a few lines (similiar to atomic absorptions spectra lines) appear on the screen. This bothered me, so i thought i'd reinstall the update. The update started successfully until the phone restarted but never waked up! Before this tho, the update kept failing (showing error that my phone was longer connected, I'm using OVI suite 2.2.0.245 ), but I kept disconnection the usb till the update started successfully. So what I want to tell you guys is that, watch out for v2.2 issues.
My battery goes completely dead but ONLY after i switch it off for the night. It seems to drain away but is perfectly OK during the day. I bought a new (Blackberry) battery and it does the same thing. Is there ac software fix for this or is my phone (bought from a reputable used hone store) just useless?I was also told that the little dot just inside the phone by the charger is supposed o be gold in colour and of it has turned blue then it means that the phone has water damage?
I have a torch 9800 and i woke up and it looked like it had just died but the red light was on so it obviously isnt dead, ive tried upgrading the software but keep getting error msgsi dont know whats going on but
Note: The Software Platform and Applications version numbers can be found under Options-About screen on the handheld. Download here: https://www.blackberry.com/Downloads...E4F82F9F00E7D4
Instructions for installing on the 9800: 1. Download the above OS file to the PC then install it to the PC by running (double clicking) the file you downloaded. 2. Go to c:program filescommon files esearch in motionapploader and delete the file named "vendor.xml." Vista/Win7 users: In the apploader folder, simply click on "Compatibility files" to see the actual Vendor.xml file. Once you've got that - simply delete the vendor.xml file there (even if you've deleted or think you've deleted it in the folder previously) and voila, it will allow you to update to the newly installed OS! 3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
The process may take up to 45 minutes to an hour depending on how much data you have to backup and restore during the process. Once it's done loading the new OS it will reboot (it may do this twice during the entire process.) You will see a black "BlackBerry" screen with a status bar for up to 20 minutes at a time while the DM says "waiting for initialization". If, for some reason, you end up with a white screen with small icons and the number 507, simply connect to the PC again and run Loader.exe again, and it should load the OS to the device.
Got the message that new phone-SW is available. Connected to OVI-Store via USB and started update. Backup was o.k.., update started but could not reconnect to phone and aborted with error message. (cable was not removed up to this point) Now phone screen is black with no reaction on any key. Just after having taken off battery I get a buzz when pushing the red key like on power up, but no further reaction. Phone seems to be waiting for data download.
Yesterday evening Ovi Suite proposed new firmware (14.002). I tried to install it, which was a mistake During the installation Suite lost connection to the phone and as I checked the phone it was in test mode. It didn't respond to any keys so I had to remove the battery. After that the phone has been dead. When I try to boot it up or try to hard reset it with three-finger-salute the only response is a short vibration. After vibration the phone stays dead.Removing battery does not change anything.
after an update with Nokia suite yesterday night my N8 wont start anymore. after initiating the update (25.xxx) it was downloading and starting the update. after a while it end with an errormessage. I do exactly remember but it was something like critical connection error. remove cable and restart the telefon for restoring your N8. After this the update will continue. But nothing like this happens. The n8 wont start. It vibrates on time and the display stays black. When i connect with USB cable, the windows USB connection sound appears and after about 5 seconds the disconnection sound appears. thats all. The charging LED is flashing for a while and after about 1 minute this also stops. Pressing the on/off button for abput 10 sec its vibrating 3 times and thats it. I bought this N8 in Libya. It had an aribic language set. I dont do any flashing or other experiments. But some days before i installed some Qt installation files manualy from the Qt symbian 3 development kit on the phone. I have done this for testing some small test applications which i produced with this kit. Maybe these causes the corruption of the phone. But the main question is how to wake up the phone? In the country where i am now is no Nokia service center available. But when i connect with USB cable two device driver are activated with name Nokia parent/generic flashing device
Yesterday a message appeared on my Nokia 808: 'important software update available'. I went ahead with the installation; it informed me that it needed to restart and then I got a white screen with a dialog box saying something along the lines of "don't try to make calls during installation". Okay, sure.
I went to the bathroom and when I got back, black screen. The 3 physical buttons at the bottom were all lit up. I left it alone for about 10 minutes, still the same. I then tried to press & hold the power button, but nothing happened. Decided to leave it overnight.
This morning, the 3 buttons were no longer lit up. Removed & re-inserted battery, nothing. Tried various 3 and 4 finger salutes found online, nothing. Tried to connect to to PC, menu button starts flashing (presumably that's an indication it's charging?). Nokia Suite doesn't recognise the device, but it will ocassionally tell me I connected a Nokia device via a non-compatible USB mode, and it will also give me 'device disconnected' messages. Hmm.
Note that my battery was close to full before I started the update.
Okay, so it's not 100% dead at least, but I'm guessing I'm gonna have to RMA it. Wanted to check here first though.
nokia lumia 1020 has just gone dead no response from the phone tried hard and soft reset nothing happens tried plugging in a charger into charger port on the phone and still nothing before it went off the phone had half battery life in it and was expreincing phone freezing up and the phone slowed down and now wont come on at all i have had the battery replaced and still no joy the phone shop tried to flash the software and no connectivity with computer also the phone shop checked my old battery with another lumia 1020 and that worked so the issue wasnt the battery
I washed my iPhone 4s last week. I just got my replacement phone. I want to restore from iCloud (for my calendar) and iTunes (for everthing else like contacts, etc.) but when I try to do that it says I have to turn off "find my phone" from my old iPhone. My old phone's display is dead so I can't do anything on it. It still rings when I get a call but I can't answer it.
Info: MacBook Pro, OS X Mavericks (10.9.2), Trackpad pointer
So everyday I go through a dead zone with my phone, and everytime I go through this dead zone, I have to reboot my phone after because it prevents me from being able to use the internet or bbm. In bbm it makes an eternal red clock (even after I fix it the messages I wrote before rebooting never send) and the internet will not load anything (nor facebook). So what I do everyday is pull out the battery to do a full reboot.
I have only had my Torch a couple of months. I used it one morning and then went in the afternoon and it was completly dead. I pulled battery. Nothing. I tried charging nothing. US Cell won't take back because it is passed 30 days and I do not have insurance on it. Even if I had insurance it would cost $100 more to send it in. I am upset to say the least. I paid a huge fee to get it as an upgrade to my curve.
I have the torch 9810 the phone just died. It wont turn on, the red light wont turn on nothing I left it in the charger for a little while and nothing. Is there anything that I can do or is the phone dead?