When I set up my Torch 9800 to connect to Wi-Fi, the home screen reports the SSID of the access point, but when I attempt to use the browser, it reports "Unable to connect to the internet, please try again later." The "Device and Status Info" screen reports the WLAN IP Address as 0.0.0.0. My wireless access point reports that the BB device is "on", and is assigned an IP address (192.168.2.17).
At one point my initial screen reported that three updates were available. However, each time that I clicked on a line offering an update, an error message reported that "The data service is not operational", and the message about the update went away.
Snooping with Wireshark show that, when the BB is turned on, an ISAKMP tunnel is established between the BB device (at address 192.168.2.17) and segw.uma.rogers.com (at 74.198.30.49), so there is absolutely nothing wrong with the physical wireless connection. (My cellular supplier is Rogers.)
My BB was received (brand new) in early April 2012, and I updated the device from 6.0 bundle 695 to 6.0 bundle 2921 on 2012-04-12, after installing the Desktop Software on my PC. (The Desktop Software offered the update, so I just did it; I was not even aware of this community until later.)
I have a Torch 9800, however it cannot connect to our 3G network here. my carrier is Digicel PNG. I have already tried setting it to 3G but it does not connect
since yesterday i`m unable to connect my 9800 with Desktop software. "uable to communicate" i try device update -> No updates found/needed i try update of device software -< one tim work, then never again. PS. taskplaner sync options are in v6.10 lightyears better!
I have the Torch. I am unable to connect to Rim's push network, Att 3g bar shows five bars and I can make calls and send texts but recieving email or using bbm cant be done. weird thing, when i log on to a wifi connection RIms icon comes back and i start recieving email and bbm works. I am going to call att, anyone else have this issue?
My Storm 9500 camera fails to function even after updating software recently to ver 5.0. Keep getting the following message "! Could not start the camera. Close other applications and try opening the camera again." I have no applications open and keep getting this message meaning I can't get to use my camera ..Help!!
1. Doesnt Turn On (I Get red light for approx 1 min with charged plugged in ONLY / then changes to charging sign on screen.
2. If chargers unplugged nothing happens no lights nothing (tried all battery pull far from this now)
3. Install all the software needed to do a full re-install BBSAK + JL_Cmder + Loader "to no avail"
4. When using the above said software i get an error on the COMPUTER saying "Cannot connect to JVM" Click either retry or cancel. the phone then seems to be going into a LOOP again, the windows device notification sounds every so many seconds.
Phone also never changes from a black screen with battery sign with lighting strike through it!Prior to the above the phone was fine, what this could be as it seems that most other threads and posts about JVM Errors seem to have a specific code and this one doesn't.
I just bought the torch.... everything is fine, email, bbm, everything.. but, broswer...I CANNOT BROWSE!!Only if I connect via wifi the browser works.. if not, it doesnt...what should i do?
I just got a Torch 9810. Been trying for the past day and a half to connect to my wireless at home. In the Networks and Connections menu the Wifi networks is not there . . .only have Mobile Networks and Bluetooth . . .does this mean that my BB is not Wifi enabled? or do I have to go elsewhere in order for it to search and find my home wireless?
I have problem with my BB Torch 9860 smartphone.I used to connect my WiFi when i am in my home.In connection management it shows that WiFi connected but when I started to browse, the browsing is happening through my Wireless connection that is my mobile provider.So loosing my money due to this.I did so many checkups still facing same problem.Please assist me on this.Also I have one more problem with G-Talk, I installed it successfully and when tried to login showing that this handheld is not support gtalk application.Suggest me on this also.
I have a BB Torch 9860 which connects to my home Wifi fine but does not connect to the internet for some reason. I cannot access the net and get my emails or use a 3rd party browser like opera nor can i do anything. This is a major concern for me as it doesn't matter when i am home but it's amjor concern when i travel abroad.
Can somebody please help me out. I just bought a new Torch 9800. However I found difficulties to browse internet. I contact the local operator. They said, i need to ensure that the setting of browser is 'internet browser'. In the common blackberry (i was using Bold 9000), the setting can be found in this path:Option--Advance Option--Browser--Default Browser Configuration==Internet Browser..However, when i check the same path in my Torch 9800, I cannot find such 'advance option' under the setting menu (in homescreen).
Does anybody can suggest me where it is or what should I do?
I just got a BB Torch 9800 for free (YAY!!!).My cousin came with it from UK. My current plan is a prepaid. It is the $50 Everything. So I just upgraded my plan to the BB plan but it doesn't work at all. It says:" Browsing the web is not included in your current plan and bla bla..."
There was a problem reading data from the server and app world must exit. Error type 100003Or rather: Appworld says I must upgrade which I then try to do. But the upgrade gives the above error.Device Torch 9800
I have the BIS plan from my carrier, and connecting via 3G is OK. The problem is, it seems like it's not connecting via wifi. The setting tells me that I am connecting to my home WIFI router. The router is in my living room, and I am using my computer to stream video from internet at this moment, so the WIFI, internet should be ok, in an adequate speed to download hi-res video. I have very low 3G signal in my living room, and I am expecting my 9800 to use the high speed internet, but it seems it's not doing it... It could not even connect to [URL].The phone acts like this since I bought it, brand new. But it always acts like this.
I recently got a a blackberry Torch 9800 through kijiji.It's great but I'm a little unsure how to set up the phone to use only wifi (since I don't often use the internet).
I recently picked up a 9800 Torch for next to no money and I thought I'd be able to get to grips with it pretty quickly. I've come from a Samsung i900 Omnia, so I'm not new to smartphones! However, this BlackBerry has me stumped.I've read through a lot of threads both here and all over the Internet trying to work out how to connect my Torch to my home network via Wi-Fi, but I'm at a loss as to how to get it to work.A little background: I'm on Orange with a PAYG SIM, which I've been using with my Omnia for the past two years with no problem. When I top up my account I get free mobile internet for the rest of that month so I don't relly feel I need a specific BlackBerry add-on. I doubt I'll be using any of the features that require a specific data plan as I'll just be using the Torch for picking up webmail by using my free Orange internet access.So, I've tried tweeking the TCP settings and I can connect to the internet via Orange Mobile Internet with no problems using Opera Mini. If I try and connect using the built-in browser I seem to get get "Cannot connect to server" error more often than not. (On a side note, I prefer Opera Mini anyway as it seem to be much faster.)However, no matter what I do I simply cannot get the Torch to connect to my home network via Wi-Fi. Do I have to buy a data plan for this function to work? If so that does seem somewhat counter productive.In over two years of use I never had a single problem getting my Omnia to connect to my home network.
My blackberry torch will suddenly stop being able to connect to any internet service. It has service and the BIS logo. I get the unable to connect to the internet message. Anyone have any solutions? I tried cycling airplane mode, battery pull, and pulling and replacing the sim. This is frustrating to say the least.
I just got torch today, activated and it don't connect to home wifi.It shows my ssid and says connected but when I try to browse says not connected.I can connect to data plan and surf, but I wanna connect to my home wifi.Tech support said try another wifi connection.So I went to AT&T store and sales guy connected to their internet wifi.I also went to mcd s and connect to wifi hot spots.But won't connect at home.I tried everything, And I had two boles 9000 before I tested last few days and same thing?Is it something to do with wifi router?I had security on and I changed settings in router and made my wifi home conn OPEN BUT STILL won't connect!
I have a blackberry torch 9800 which was working fine until i went to england. The connection was fine. Then when i came back home to ireland my phone wouldn't connect to the mobile network and still won't! I can't send texts but i can ring people.
I connected my old 8310 to se if data was present and to charge the device. Now my computer does not recognize my 9800 Torch when connect.Thus I can now sync my device with contact and calendar files.
I have been through all the relevant BB Database information on how to deal with the inability of my phone to connect to the Desktop Software. I have reviewed previous related posts and re-installed the latest Desktop Software.All to no avail.
my bb torch 9800 is not connecting to wifi settings in my home. i've spoken to tech people both at bell and rim with no solutions. i have three other bb in this house and all connect to wifi. when we change the protocol from wep to wpa my phone works but the others do not. the other phones are brand new. when we switch back to wep setting my phone "fails to associate with network".
I have just got a new 9800 torch unlocked directly from RIM not through my carrier (Rogers). I am having trouble getting internet to work over wifi. I have a bb dataplan since I am upgrading 'maybe' form the 9700. In my house I have poor signle but it is perfect outside and everything seems to work just fine on the rogers network.I have been incontact with rogers and my sim,IMEI are registered with rim (sa indicated with tech support).When I am inside connected to my router I have no internet on the bb but the internet does work on my laptop and desktop one wired one wireless.The wifi says it is connected but there is no UMA indicated but the wifi logo is white there is no browser, facebook etc. Message: "Unable to connect to theinternet, please try again later."
I have changed the SIM of my torch that doesnt have data service currently. I am trying to connect to internet through Wi -FI, but it is showing connection error.
Problem: When I connect Torch with PC and start Desktop Manager, DM asks password for BB. Once the password is punched, DM takes some time to connect i.e. a PC and BB is shown on Torch screen, trying to connect to each other AND then DICONNECTS.
Actions Already Taken: I have uninstalled and reinstalled DM. I have taken out battery and reboot BB. BUT problem persists.
I had many blackberry before my new torch 9800 and it is working good but now i couldn't connect/browser to internet efen though my blackberry messagener is working good.This is the message i always received during trying to open internet : "unable to connect to internet,please try again letter.If the problem persist please contact your service provider."
I have not activated any data plan form any of the net work. I am connecting through wifi. I am unable to login into instant messaging(like Yahoo, gtalk..etc). Please let me know can I connect all the applications when iam using wifi.
When I use my phone on Wifi, it works fine for about 10-15 minsutes and then crashes the router that it connects to making the internet on the whole network go down. this happens at home, at other peoples homes, at work or even in public wifi areas like hotels or retail stores (yes I've tried it a few different places)I've tried calling my phone provider a long time ago and they were stumped at this issue but since the wifi technically works the stores refused to do anything on a warranty basis while it was still active. It's not like wifi is a must for me, the internet speed on the torch is still quite slow and I have tons of data on my plan that I don't use but I wouldn't mind getting it fixed so that I can actually turn on my wifi antenna without worrying about crashing everyone's networks.
The message 'A communication failure has occurred. The server may be busy.., please try again later" . I have an unlocked phone, and it worked fine on the wifi with a foreign SIM card. I traveled abroad always with the mobile network off and just using the wifi and it worked perfectly. Only when came back to the U.S. and inserted my AT&T SIM card and registered the phone with them, the wifi did not work any more, even though it connects to all the available wifi networks.I have tried everything: re-registering the phone with the previous foreign SIM card; reset the phone to factory defaults; but it did not solve the problem.
I'm trying to connect to an Airport base station that has a 6-letter password, but my BlackBerry insists that it must have 6 or 10 digit hexadecimal password or something like that, and won't accept when I enter the correct password—it won't even try to connect! Is it me or is this a ludicrous problem? I've searched everywhere and can't find a solution. Changing the base station password is not an option because it's shared by a lot of people.
