I'm updating my Bold to the latest OS and I get to the Application Loader then it goes to communication port selection but the field is blank. Any idea what to do? I remember doing something with my old curve like rebooting it then plugging it back in in a certain time but I can't find anything about that anymore. So, any ideas?
I have recently purchased this 9700 (3 weeks ago) and am generally very pleased with the device. BUT If I leave the BB 9700 connected overnight to the computers USB Port for charging, and, obviously, after a few hours the computer will go to sleep, thus turning off the power to the USB port In the morning I find that the BB is: Off and will not turn on, unless it is power reset. In other words I have to open up the back and pull the battery for a second then after It is put back in the red light will display nevertheless it will turn on and be fine once it boots back up. There are no other indications or problems. I notice that other people have similar complaints with their BB's.
I have a 9700 and over the last 2 days when I try to make a call the phone switches between headphones and headset and if I try to select options and activate headset the phone completely ignores the request and keeps switching between functions , the only way I can make a call is to put ipod headphones into the jack port and then I can select activate handset and the phone will let me make a call normally , however if I pull the headphones out during a call it will start to switch between functions again .
On the left side of the phone (same side as the micro usb port), there is a small 1/8" hole or port towards the bottom - about an inch up from the bottom. Can anyone tell me what that is for?
The reason I ask is because the first case I was using had a cut-out specifically for that port. But now I just switched to a different skin which doesn't. And I didn't want to cover it up if it was important..
finally, with USB-2Go, I can find valid reason to upgrade from N70. good pixel camera, ability to browse files from external drive, and HDMI out. Well my question is, is the USB2Go port seperate from the HDMI out port ? If yes, does it mean I can use the N8 to browse my external drive and play video thru my HDTV ? So Nokia N8 can be my full fledged media center, radio player, camera, phone
According to my IT guy I need to get my phone to pull emails out either on port 995 for SSL POP3 or on port 993 for SSL IMAP. My phone errors out when I setup the account through the phone. Koodo does not allow setting it up through a browser. They say the server I have used my 8830 on for years is not compatible with my new 9360 and that it is a Blackberry problem!
My email is using SSL but with port 465. Trouble is I cant change the port since I cant get to the screen to change it until the account is verified. its catch 22.I have another email account on this server that also needs editing to the none standard port, but the web site wont let me change it.
This is an odd one. I have a Curve 9300. I play music through my earphones and there has never been a problem. Today however, i cannot get the pin to go into the portal - it seems to have been sealed. Tried other normally compatible plug ins, but they too are blocked.
I have two IMAP accounts setup on my Blackberry.When I receive an email on account A, I can reply to that email and it works correctly.When I receive an email on account B, I get an error when I reply.This has something to do with which SMTP server is being used and the port it uses.I need to be able to set the SMTP server for each account separately, but I cannot find anyplace where I can specify the SMTP server or the port.Is there a place to specify the SMTP server and port for an email account?
So, the inevitable has happened and my Bold won't charge through the usb port anymore. I don't have a warranty, and I'd like to attempt to fix it on my own. I'm planning on ordering it form sw-box.Thing is though, I don't know how to replace the port.Do I have to desolder? has anyone ever done this before? Any help/feedback will be appreciated.
I got a new BB 9700 Bold yesterday and having problems with setting up the sync for the calendar and the contacts which are on my outlook. My hotmail email accounts are working okay. The outlook is on my PC and is the front face for my hotmail accounts.
When I go in to the BB Desktop device manager - version 5.0.1 (latest version) , I go in to the configure option on the left and it lets me click on calendar> then I select outlook and it then lets me select 'finish'. However at this stage an error box flashes up saying 'no available message stores'. In addition when I check the wifi config on the calendar and contacts icons on the BB device it will not let me select yes on the wireless connection for them.
I have a BB Bold 2 (9700). The Media Card slot wont lock down the card and keeps springing it out. If i keep the card pressed down it works but wont lock down.
I have Outlook 2007 on my desktop computer and use BT as a service provider and for my email, my Blackberry supplier is Vodafone and I use BIS.I have noticed that if my Blackberry receives an email first I don't get the same email delivered to my desktop. If my desktop gets an email first then the same email will be delivered to my Blackberry. I was happily deleting emails from my Blackberry thinking I would have them all on my desktop but I now find I have to check what emails I have on each before I delete anything. Is this an issue that anyone has come acrosss before and how do I resolve it apart from synching the Blackberry and desktop?I'm often away from the desktop which is why I bought the Blackberry in the first place.
I've owned my 9700 for nearly 2 months now and I'm still not used to the keyboard. I prefer my 8310's spaced out keys. has anybody replaced the 9700 keyboard with the Atlas keyboard?
I have a problem with my Blackberry and would be grateful if anyone knows what the problem is.I have only my Blackberry 9700 bold for 1 month or so.I am unable to lock my keypad by using the lock key on top of the phone. This has happened before but after charging my phone it started to work again. I have turned my phone on and off, tried charging it and the button still doesn't work. Although the keypad will lock when I put it into the leather case.Do you think it is a problem with my blackberry and I should return it? Or is this a problem people have had before and if so, how do I fix it?
My Bold is stuck on the boot screen (at about 75%). I've tried many battery pulls with and without the SIM and it keeps doing the same thing. I've searched what I think are all the threads on here relating to this, but I'm still stuck. I'm able to connect to the device if I run Loader.exe like a user suggested, but I don't know how/where to get software to load onto the device. All the places I've searched for an OS says I need to go into the device to find information about it. Well, I can't get into the device to do that. So, how do I know what OS to download and install? I really want to exhaust all possibilities before I have to completely wipe the device because I don't have a current backup. But, even if I wipe the device, I'm going to need to download an OS which I can't do now.
First two locked up constantly and rebooted. All I did was:
Set up Yahoo Mail Download Google Maps, Point, Movies Download One Theme - 18 Icon BlackBerry 9700 Sync with Yahoo Contacts Sync with Lotus Notes Calendar Only. Back Up WiFi connection to home router Bluetooth headset
The other day I walked into a Walmart that had a display of cell phones. There was the 9700 there. I have the 9000. I was really looking forward to upgrading to the 9700, but now I don't know. It's LIKE REALLY small. I love the size of my 9000, and I'm afraid I'm going to have times typing on the 9700 keyboard now.
I have no idea what's going on with my camera, when I open it, it keeps showing me a black screen and keep loading.
but my problem isn't like the others, cos it didn't show me message like, "Could not start the camera. Close other applications and try opening camera again".
I found it out! You have to dismantle the phone, though. Walkthrough:
1) Remove the bottom plate with the branding (use guitar pick, small flat screwdriver, etc) 2) Remove and save warranty sticker in case the phone actually breaks. 3) Remove the two small screws on either side of the phone. 4) Using a guitar pick, small screwdriver, or case-opener tool, start on the sides of the phones slightly below the convenience keys and move down towards the bottom. On the bottom, there are three small clips that WILL NOT BREAK NO MATTER WHAT. Disconnect them. Then remove the keypad top first. 5) Slowly slide the pick/driver/tool from the bottom edges of the phone up until the volume rocker. One tab on each side should pop, but they are difficult. Take your time. 6) Grip the sides of the bezel and slide upwards. The top cover should come off along with the back chrome bezel (the one above the camera). 7) The phone will now appear very basic with only the trackpad and screen recognizable. On the white lower portion, several small, rectangular LEDs can be seen. 8) Use a preferred color of sharpie to color a large clear piece of packing or scotch tape, and cut it into 2mmx2mm squares. 9) Place one color square over each LED. Reassembly 10) Insert the keypad into the bezel bottom first, making sure that the screw tabs for the keypad are underneath the screw tabs in the bezel. 11) Holding this configuration, slide the bezel on top first. 12) Make sure the hole for the trackpad and the trackpad itself line up, this will assure you that the keypad is in right. Also look at the "frets" in the keypad. 13) Push on the bottom of the bezel until you hear at most three clicks (the three tabs locking back into place) 14) Run your fingers along the side with pressure to make sure that you snap in the single tab on both sides of the phone. 15) Insert and screw in the two small screws you took out before. 16 OPTIONAL) Put back the warranty sticker on the ORIGINAL side that it was on before. 17) Snap the carrier plate back into place. 18) You're done PICS TO FOLLOW
Is it possible to stream my recorded video from the BB 9700 to a PC without having to transfer it first from the SD Card to the PC?I can stream audio through blue-tooth fine but cannot stream video either through blue-tooth or Wi-Fi.
Has anyone else noticed that the Bold 9700 Keyboard has been revised in the past few months. I got mine about 3 months ago, and with the ones that i received in the last few weeks they feature a new keyboard. They revised version has a rolled keyboard around the edge.
How hard is it to switch to the android OS from blackberry OS? Also how hard will it be to snych my contacts on the new android phone? I have suckmo aka T-Mo.Does anyone have suggestions on handset models too
I have a Bold 9700 recently bought about 4 days ago... At first all the communication channels works fine i.e. Mobile Network, Wifi and Bluetooth. Suddenly this morning the wifi stop working. I'm unable to switch the wifi on even clicking on it many times. Tried to turn off the device and remove the battery for about a minute and still the problem is not solved.
Is it normal for my 9700 to take more than 5 minutes to start up?? Its strange because not to long ago I used to do battery pulls or a soft reset and my device would be up and running within a minute or two!! By the time it load up my battery is almost drained!