Xperia Pro/Neo/V/L :: WiFi Detected - Status Connecting / Scanning Then Disconnected
Apr 20, 2012
I bought my Xperia NEO few days back and m having Wifi connection problem. My mobile detects a network properly but when I connect, it shows status Conecting, then it switches to Scanning and in the end shows Disconnected. I've tried it on several hot spots but to no avail. Whether it is sensor problem or some software issue or what shall I do.
When I'm trying to connect to my home network with wifi with correct username and passwords. Its showing me connecting and then it is getting disconnected automatically after connected.
Why my X6 disconnected from wifi after I get connected for few minutes? I've tried using other WiFi, still, its not working! Among all WiFi I've tried before. Only Mcdonald WiFi keep me connected! Anything wrong with my settings?
Unable to see Wi-Fi status after connecting to power source. After tapping Settings > General > iTunes Wi-Fi Sync, the message reads: Sync will resume when "R300764AHWR001" is available. how to sync my iPhone 3G to ITunes,
The wifi in the mini gets disconnected quite often. And the bad thing is that it does not reconnect by itself. If I go in the wifi menu, all networks shows as "Out of range", even after a rescan. The only fix is to disable and re-enable the wifi. Looks like a bug! The phone, model E10i, is updated to firmware 1.6, build 1.0.A.1.38.
It just connected on my friends home wifi, then I tried to public wifi's but it kept on saying disconnected or unsuccessful. Just obtaining address but won't connect.....
I'm having my first issue with my Z3. Every time I connect my micro USB to hdmi lead it drops the wifi connection and the screen connection will drop about every ten seconds. I'm at a complete loss for answers I've try'd different leads and trawled Google for hours for a fix. This set up worked perfectly on all my other Zs.
Phone was updated recently to Android 2.1, now the home WiFi network is not being detected by the phone now, all other devices are detecting this home network except my SE x10 mini/pro, tried to follow all troubleshooting points mentioned on the website but of no use now, repaired it about 2-3 times via web but not of no use...
I'm using Curve 8900 os5.0.0.592 on vodafone. My phone had a problem with its speakerphone and I had to have it replaced. It was replaced at a backdoor repair because in Zimbabwe there are no registered blackberry® technicians. The speakerphone is now functioning but the wifi is no-longer scanning. Just wanted to ask if the two are by any chance related.Also BBS are not available in Zimbabwe so I rely on wifi when I want to use the browser.
2 weeks ago my wifi wasn't even turning on, no matter what i tried, the wifi button was always on off.
Then today it just randomly worked and I was able to turn on my wifi, it allowed me to use my wifi network for 5 min.
I decided to turn the wifi off then on again, and now it doesn't scan for networks. So even though my wifi is on, there are no list of networks I can choose to join.
edit: Smart network switch is always off, because mobile data is always disabled for me, Also i cannot find reply button.
I have Sprint Galaxy S5 and I am ready to throw it out the window. I have not had a problem with the phone until recently. I can't get it to cut the WiFi off and KEEP IT OFF!! I have tried everything!! I have gone into the advanced settings under WiFi and cut off the "network notification" (receive notification when open networks are in range), I've cut off the "Keep Wi-Fi on during sleep" and changed it to NEVER. I unchecked the box and cut off the "always allow scanning" feature. Also under advanced settings I have cut off the smart network switch.
I have also gone into the "more networks" and cut off my connection optimizer and cut off the partner WiFi option. Even went as far as going into the Network Mode and changed it to LTE/CDMA. All of this is what I have read on the forums. Nothing is working. The WiFi is still cutting on. It wouldn't bother me if I had WiFi to connect to but because I don't it's interfering with my regular mobile data and making it to where I can't use my data. It cuts on about every minute!! Not to mention this is draining my battery! Oh another thing, I downloaded a virus scanning app and my phone is clean.
I use to keep the WiFi Scanning for location services on before Lollipop. Since Lollipop, if it is on, WiFi is ALWAYS scanning killing my battery within the hour. So I turned it off hoping that the Marshmallow update(s) would fix this. I'm on 6.0.1 and the issue is still here. It's kind of annoying turning on WiFi just for my GPS to lock on accurately. If so what fixed your phone.? I've done cache clearing, in the phone menu itself and through recovery to no avail.
I have a question about wi-fi on the X8. I have it turned on when at home to use my wireless broadband. Sometimes when I activate my phone, there is no wifi icon at the top on the status bar, then after a few minutes it appears. Does the wifi connection on the phone turn off after a time idle? or is my phone keep losing connection? And also if it is losing connection has anyone else had this problem?
When setting wifi to turn off when screen turns off it does so and that's perfect. However, When the screen is reactivated the wifi locks in "scanning" forever unless you press disable and enable wifi in whech case it will immediately steps scanning > acquiring > connected.
My wifi symbol in he status bar constantly has flashing arrows, one on the right hand side and one on the left hand side. I would expect this if the phone was constantly downloading email or social network feeds but when I try to load those I get the message "Could not open connection to server" when attempting to access e-mails as well as this message when attempting to load news feed on Facebook "Error loading news feed" ....
Our company was able to receive the new Bold 9900 but it seems there is an issue with activating wifi on the device. Have tried turning on Wifi, but it attempts scanning for networks then eventually fails and turns wifi off. It doesn't even list any active access points. Doing a battery pull and reset the device to factory defaults does not seem to do the trick. I am thinking it could be a defective device or perhaps a software issue. BB OS: v7.1.0.1091
How do we put a sony ericsson logo in our Xperia X10 when updating your status in Facebook via mobile or Wifi? In Xperia X10 mini pro, i saw the logo. It's actually my cousin's SE Xperia Mini 10 Pro but in my Xperia X10 doesn't show. It only shows like these words " via Android"
I bought a new Neo V yesterday running android 2.3.4 and build number 4.0.2.I could just connect to my home wifi once yesterday when i set up the phone.From then on its been frustrating to get the wifi connectivity(WPA/WPA2) working, it just says the network Not in Range and sometimes does not even show it in the list of available wifi networks.The phone just does not recognise my wifi network i have 2 laptops and another android phone (2.1) connected to the network.I have tried doing everything described in some discussions here likeforget the network and try again - Restore to factory settings - worked just once after the restore and then back to the problem.
im trying to conecct to my PC via Wi.Fi, since it's bothesome to connect the USB cable each time i want to transfer something.I have a TP-Link wireless router to which my PC is connected via LAN and my phone via wireless, i have a Wi-Fi connection on my phone and the internet is working on it. Both PC and phone are in the same network (ex. 192.168.1.x, where x is the IP address for each device).What i can't manage to do i connect my PC and my pone via Wi-Fi, i followed the manual on page 111:[URL]The manual suggests the following:To pair your phone wirelessly with a computer using Media transfer mode:
1 Make sure Media transfer mode is enabled on your phone. It is normally enabledby default.
2 Connect your phone to the computer using a USB cable.
3 Computer: Once the phone name appears on the screen, click Networkconfiguration and follow the instructions to pair the computer.
4 When you are finished pairing, disconnect the USB cable from both devices.
The above instructions only work if Windows® 7 is installed on your computer and the computer is connected to a Wi-Fi® Access Point via a network cable. (i have win7 x64 and my PC is connected to the Wi-Fi router via LAN)The problem is i can't get past step 3, as soon as i connect my phone to the PC the PC Companion recognizes it and there is no Network Configuration options availible like the manual said there would be. When i go to the Connectivity settings it says "No trusted hosts". Do i need to port-forward some port, If yes i know how to do do it, but i don't know which port.
just bought a xperia ray today and it seems to connect to my network and then straight away it disconnects again - i'm not really sure what the problem is. i have rebooted my router and rebooted my phone both to no avail.i think its werid because its finding the network just not actually connecting.
I use wifi at home without a problem, at work it tries to connect to the router but it disconnects and tries again in a continuous loop.When somebody with an iphone or ipod wants to join there is no problem so the router works.i reset the router and restarted the phone as well. and it's on dynamic IP. the channel is set to auto, right now it's at 1
Z2 has work perfectly for months on our work wifi network. One day came up with msg wifi networks available, clicked on it, clicked to connect to saved network, and just says saved and doesn't connect.
Tried forgetting and reconnecting Tried restarts
Defiantly isn't the router as others are connected. Is this a fault where my phone will need to be sent back?
Since I moved to android 2.1 I've not been able to connect to the wifi at my work, even though it worked just fine on 1.6.(old forum posts I've found ages ago suggested that a similar issue occurred on android 1.6 but there was some kind of patch that fixed it. Is something like this available for 2.1 now?)
Today I uploaded the firmware through Sony PC Companion to Android Version 4.0.4 build 4.1.B.0.587. After that my wireless connectivity that was working fine, stopped working.
My Wifi is secured and before I give the password, it says the signal strength is Excellent. After that, it says Signal strength is Poor and tries to keep connecting.
I'm currently experiencing some problems with my wifi on my xperia z2 and every 2 or 3 seconds my wifi keeps droping out and connecting to the mobile network and i've tried restarting my handset and seems fine for like half hour then it goes back to dropping out now would it be something to do with my software as i'm currently on 5.0.2 or is it best i do a factory reset as i've not done one it like 8 months from when i first got my phone..
I'm using Xperia Z2, and this week I've update it into official Android Lollipop 5.0.2 through PC Companion. However, after the update installed, i seen a horrible WiFi problem: It's "always on". Even after I turn off scanning always available option on Advance Setting, the WiFi still on, as seen from the Battery Usage. This problem makes my Z2's keep awake and taking a huge battery loss.
I bought an Xperia Ray last Saturday because my HTC Salsa was struggling to connect and stay connected to my home wifi and also had internal memory problems (not enough internal memory)..Now I'm having different wifi problems with the Ray.It connects but the connection is very slow although nothing else is accessing the wifi and when my husband connects with his Samsung Galaxy it is fine and very fast. Every time the screen light goes out (set to every 10 mins at the moment) it seems to drop the wifi connection and when I "wake " it again it has just the mobile connection but starts to connect again straight away, unfortunately this is not fast.