I bought my Xperia NEO few days back and m having Wifi connection problem. My mobile detects a network properly but when I connect, it shows status Conecting, then it switches to Scanning and in the end shows Disconnected. I've tried it on several hot spots but to no avail. Whether it is sensor problem or some software issue or what shall I do.
I am trying to get my torch 9810 to connect to my home wi-fi network and get the error "Failed to associate with the network". My wifes curve connects fine, and my old curve connected fine too. i upgraded and restored my data setups etc from a backup, but it hasnt worked since.
Why my X6 disconnected from wifi after I get connected for few minutes? I've tried using other WiFi, still, its not working! Among all WiFi I've tried before. Only Mcdonald WiFi keep me connected! Anything wrong with my settings?
I use wifi at home without a problem, at work it tries to connect to the router but it disconnects and tries again in a continuous loop.When somebody with an iphone or ipod wants to join there is no problem so the router works.i reset the router and restarted the phone as well. and it's on dynamic IP. the channel is set to auto, right now it's at 1
Z2 has work perfectly for months on our work wifi network. One day came up with msg wifi networks available, clicked on it, clicked to connect to saved network, and just says saved and doesn't connect.
Tried forgetting and reconnecting Tried restarts
Defiantly isn't the router as others are connected. Is this a fault where my phone will need to be sent back?
I'm currently experiencing some problems with my wifi on my xperia z2 and every 2 or 3 seconds my wifi keeps droping out and connecting to the mobile network and i've tried restarting my handset and seems fine for like half hour then it goes back to dropping out now would it be something to do with my software as i'm currently on 5.0.2 or is it best i do a factory reset as i've not done one it like 8 months from when i first got my phone..
My school has their own wifi, and I would use it on a daily basis, and I need it because its my only form of communication with my mother while Im at school. One day, all of a sudden, it just stopped working, and now it says disconnected. My phone works with my at home wifi, just not the schools. Is it a problem with the network or my phone?
I still have to wait for full-functionality on my X10 when the service provider gets updated to a new contract in a few weeks.However, I cant get it to connect to my home wi-fi network.It recognises the network and remembers it. The Network Key is good. Ive tried both with and without 'data traffic enabled', and of course the phones Wi-Fi is turned on- Ive tried that both through the main screen and through the Wi-Fi Settings screen.I got a shock bill last week because the phone was using dial-up connection instead of Wi-Fi without me realising it!Also, how can I ensure it chooses unsecured or 'FreeZones' when on the move over dial-up? I want to be able to use the Navigation function, but worry about the phone being connected too much, even with the internet bundle I am subscribing to.
I got my x10 mini pro today but cannot get my phone to work with my home network. It's says it's connected but when I try to use the browser, facebook etc., it won't load pages (these are only working through mobile internet).
I've got data traffic, and Wi-Fi ticked and I can see my network on the Wi-Fi Networks list but when I click on it and enter the password beneath Wi-Fi it says "disconnected".What's even weirder is that I managed to connect the phone to the internet the first time I booted it up for five minutes, but since then I haven't been able to recreate that success . What should I do?
Orange required me to install their Router - a Netgear DGN 1000. When trying to connect my Blackberry to the network, it finds my Home Network but then tells me that the Router supports Wi-Fi Protected Setup. To connect using a PIN (which my Blackberry will generate, click Next. I click next and the mobile generates an 8 digit number with the message "Enter this PIN into your wireless router."I cannot find a way to enter a PIN into the Netgear Router and all attempts to get help from Netgear have failed to solve the problem.The latest advice from Netgear was that I should contact Blackberry.Incidentally, the Wireless Printer and the Wireless Laptop both work inconjunction with the Router, as does the PC which is hard wired to the Router.
The wifi in the mini gets disconnected quite often. And the bad thing is that it does not reconnect by itself. If I go in the wifi menu, all networks shows as "Out of range", even after a rescan. The only fix is to disable and re-enable the wifi. Looks like a bug! The phone, model E10i, is updated to firmware 1.6, build 1.0.A.1.38.
My iPhone 4s cannot connect to ANY WiFi network. My ipad, Mac Book Pro all do without any issues, both at home and the office. I've reset all my settings and even reset my phone to factory settings. Iit still won't connect, just a constant spinning wheel looking for a network. Is this something ISO 6 will fix?
I started to ask for help from the forum then solved it my self, so here is the problem AND below, the answer: I am trying to connect my 9300 to my home WiFi network ( LinkSys WRT54GS V4.0 router). The Curve can see my home Network when I scan but the connection brakes immediately, give an error message like it couldn't associate with the network.
I have spent hours waiting for and talking to: Telus: who reviewed my phone setup and told me the problem must be with the cable providerShaw Cable: who told me they had nothing to do with it and it must be a problem with my routerLinkSys: who told me that since my laptop had no problem seeing the internet that it must be my phone.....Then I tried RIM but couldn't find anything of help except (my last hope) the forums, where I found some inspiration and kept lookingMy Black Berry Curve 9300 is set up as follows: Options: Mobile Services > Data Services 'Off' (I don't want to run up big data bills unintentionally with pay-as-you-go data)Options > Advanced > Browser > HotspotUnder Manage Connections:Mobile Network: 'Telus' (has checkmark after),Wi-Fi 'On' (has black box with white line after)Manage Connections > Wi-Fi Options > Active Wi-Fi Connection = None (even after finding & saving my Network profile)Finally, I updated my Router software. It didn't help but I did learned how to back up my settings (Router Software > Administration > Config Management > Backup)
(Settings = all my addresses for the MAC filter etc. & other non default settings I'd made to increase wireless security)
I have just recently bought an iphone 4, however it wont connect to my home wifi. when i select my bt-homehub from the networks the circle just keeps spinning as if its loading, everything else like laptops etc are connected to the wifi so it cant be my hub, and when i go to a friends house and to the phones4u shop my iphone connects to their wifi and has a tick beside it so i know its connected and has the wifi signal in the top left hand corner whereas when im home my iphone has an E in the top left corner, My mum is able to go on wifi using her samsung phone. ive tried resetting everything and turning my iphone on and off and ive called my internet provider and they say everythings fine with the wifi hub.
I have a Samsung Galaxy s5, and recently updated to Lollipop. Had all the major problems reported, so I did a system restore which fixed a few of them. My most pressing concern, however, is that I can no longer connect to my work WIFI. I had no problems connecting prior to the update. The WIFI is set up where you connect, and then a webpage should open up for you to login to the system. My browser opens, but will not load a page. The progress bar gets stuck on one spot.
I have an ADB wireless router and a very slow internet conection , and although my 2 laptops connect to the wifi here in Portugal, my blackberry curve 8520 on vodafone PT, doesnt connect , it identifies the network and shows wifi logo in grey and under network connections it showsthe network name with a white dash next to it and the signal strength.i have tried different setting on the router such as: wpa2, wpa, wep and open, but i get the same result.my internet speed is only 213kbps, would this effect the wifi? i have tried deleting the network and then taking out the battery while witched on etc....
It was conecting fine at home. at work I always had the 3g symbol as work will not share their wifi. Downloaded a ring tone today through the app store then went out. Came home and noticed when using the internet it was 3G and not my wifi - kept telling me unable to connect, Asked it to forget this network then tried to rejoin just keeps saying unable to connect? I'm stuck in the UK with my tech savvy son in Aus - hence he bought me the phone. My internet at home is fine,
My husband's brand new Curve 9300 will not connect to our home WIFI network. Although it picks the network up it will not connect stating "cannot find IP address". The network key is correct, & other Blackberrys in household have connected with no problems
I'm having my first issue with my Z3. Every time I connect my micro USB to hdmi lead it drops the wifi connection and the screen connection will drop about every ten seconds. I'm at a complete loss for answers I've try'd different leads and trawled Google for hours for a fix. This set up worked perfectly on all my other Zs.
Just upgraded from a pearl to a curve and al of a sudden am experiencing this apparently common problem.Sorry if this is a new topic on old subject but I am at end of my tether trying to find a solution. To date I have tried Manual setup Static IP Phone restore Battery removal Sim removal Router Restore So, today, and purely for research purposes went to McDonalds for lunch and tried their Wifi (had a quarter pounder with cheese with sprite for those interested) and just like back at home, connects first time then drops then "failed to associate with network".I am on Orange with the Blackberry unlimited internet add on and everything worked fine with my pearl.Have tried Orange tech but , well the less said the better there.
My Curve used to connect to our home wifi. My phone discharged and now it does not connect. I may have reset to defaults during my attempts to connect, I am not sure what happened. My wife has the same blackberry and connects just fine. My phone sees the router, but it shows a WAP security deal. When I try to set it up-there is no WPA option. It tells me the blackberry will enter a PIN, but it never does.
I keep getting 'Out of range' from my aino while trying to connect to my home wifi (2wire 2701HGV-E). Need help on how to solve this! Also my phone is not detected during the update service via usb-to-computer. It is stuck at the 'connect' page and doesn't move onto 'confirm'.
When I leave home and return, I have to manually connect back to my home wifi. From what I remember, it used to do that all by itself and connect with any other network that I've connected to in the past automatically. It no longer does that. I'm not finding any answers on Google that work.
I'm running iOS5.1 on my iPhone 4. about 10 days ago (before I got the iOS update), my iPhone stopped connecting to my home network. It's able to detect it and the signal is strong but it won't connect. I'm able to connect to Wifi everywhere else (at the library, my friend's house..etc). I've tried rebooting a couple of times, renewing the lease, reseting network settings, forgetting the network and reconnecting to it. Nothing seems to work so far! I've also tired restarting my router..