I use wifi at home without a problem, at work it tries to connect to the router but it disconnects and tries again in a continuous loop.When somebody with an iphone or ipod wants to join there is no problem so the router works.i reset the router and restarted the phone as well. and it's on dynamic IP. the channel is set to auto, right now it's at 1
View 1 RepliesZ2 has work perfectly for months on our work wifi network. One day came up with msg wifi networks available, clicked on it, clicked to connect to saved network, and just says saved and doesn't connect.
Tried forgetting and reconnecting
Tried restarts
Defiantly isn't the router as others are connected. Is this a fault where my phone will need to be sent back?
When I'm trying to connect to my home network with wifi with correct username and passwords. Its showing me connecting and then it is getting disconnected automatically after connected.
View 9 Replies View RelatedI'm currently experiencing some problems with my wifi on my xperia z2 and every 2 or 3 seconds my wifi keeps droping out and connecting to the mobile network and i've tried restarting my handset and seems fine for like half hour then it goes back to dropping out now would it be something to do with my software as i'm currently on 5.0.2 or is it best i do a factory reset as i've not done one it like 8 months from when i first got my phone..
View 2 Replies View RelatedI have a 4s and it was dropped since then it will not connect to AT&T network or wifi. I have tried resetting my network and factory settings no luck. Any other possibilities I could try?
Info:
iPhone 4S
My iPhone 4s cannot connect to ANY WiFi network. My ipad, Mac Book Pro all do without any issues, both at home and the office. I've reset all my settings and even reset my phone to factory settings. Iit still won't connect, just a constant spinning wheel looking for a network. Is this something ISO 6 will fix?
View 1 Replies View RelatedI am not able to connect wifi network to my phone.
View 1 Replies View RelatedI started to ask for help from the forum then solved it my self, so here is the problem AND below, the answer: I am trying to connect my 9300 to my home WiFi network ( LinkSys WRT54GS V4.0 router). The Curve can see my home Network when I scan but the connection brakes immediately, give an error message like it couldn't associate with the network.
I have spent hours waiting for and talking to: Telus: who reviewed my phone setup and told me the problem must be with the cable providerShaw Cable: who told me they had nothing to do with it and it must be a problem with my routerLinkSys: who told me that since my laptop had no problem seeing the internet that it must be my phone.....Then I tried RIM but couldn't find anything of help except (my last hope) the forums, where I found some inspiration and kept lookingMy Black Berry Curve 9300 is set up as follows: Options: Mobile Services > Data Services 'Off' (I don't want to run up big data bills unintentionally with pay-as-you-go data)Options > Advanced > Browser > HotspotUnder Manage Connections:Mobile Network: 'Telus' (has checkmark after),Wi-Fi 'On' (has black box with white line after)Manage Connections > Wi-Fi Options > Active Wi-Fi Connection = None (even after finding & saving my Network profile)Finally, I updated my Router software. It didn't help but I did learned how to back up my settings (Router Software > Administration > Config Management > Backup)
(Settings = all my addresses for the MAC filter etc. & other non default settings I'd made to increase wireless security)
I have a Samsung Galaxy s5, and recently updated to Lollipop. Had all the major problems reported, so I did a system restore which fixed a few of them. My most pressing concern, however, is that I can no longer connect to my work WIFI. I had no problems connecting prior to the update. The WIFI is set up where you connect, and then a webpage should open up for you to login to the system. My browser opens, but will not load a page. The progress bar gets stuck on one spot.
View 2 Replies View RelatedJust upgraded from a pearl to a curve and al of a sudden am experiencing this apparently common problem.Sorry if this is a new topic on old subject but I am at end of my tether trying to find a solution. To date I have tried
Manual setup
Static IP
Phone restore
Battery removal
Sim removal
Router Restore
So, today, and purely for research purposes went to McDonalds for lunch and tried their Wifi (had a quarter pounder with cheese with sprite for those interested) and just like back at home, connects first time then drops then "failed to associate with network".I am on Orange with the Blackberry unlimited internet add on and everything worked fine with my pearl.Have tried Orange tech but , well the less said the better there.
I am trying to get my torch 9810 to connect to my home wi-fi network and get the error "Failed to associate with the network". My wifes curve connects fine, and my old curve connected fine too. i upgraded and restored my data setups etc from a backup, but it hasnt worked since.
View 2 Replies View Relatedi bought this phone recently and im having issues on getting the network connection. till yesterday it was working fine. but now event though i connect it does not get the connection. but it shows from the settings it is connected. but on the top it does not shows the E or H icons.
View 1 Replies View RelatedI have an AirPort extreme and two AirPort expresses. I have never had any issues. Now, my iPhone 4 and 4s will not connect to wifi. However, my PC and iPad will connect without any issue. I have tried resetting the network, routers, and cable modem. I have also tried resetting the iPhone network settings as indicated in the discussions. I've looked at the airport Utility and and only strange item I notice is that the AirPort Express is broadcasting on the 5GHZ channel, which I understand the iPhones only work at 4GHZ. I'm out of options.
View 4 Replies View RelatedI bought a new Neo V yesterday running android 2.3.4 and build number 4.0.2.I could just connect to my home wifi once yesterday when i set up the phone.From then on its been frustrating to get the wifi connectivity(WPA/WPA2) working, it just says the network Not in Range and sometimes does not even show it in the list of available wifi networks.The phone just does not recognise my wifi network i have 2 laptops and another android phone (2.1) connected to the network.I have tried doing everything described in some discussions here likeforget the network and try again - Restore to factory settings - worked just once after the restore and then back to the problem.
View 9 Replies View Relatedim trying to conecct to my PC via Wi.Fi, since it's bothesome to connect the USB cable each time i want to transfer something.I have a TP-Link wireless router to which my PC is connected via LAN and my phone via wireless, i have a Wi-Fi connection on my phone and the internet is working on it. Both PC and phone are in the same network (ex. 192.168.1.x, where x is the IP address for each device).What i can't manage to do i connect my PC and my pone via Wi-Fi, i followed the manual on page 111:[URL]The manual suggests the following:To pair your phone wirelessly with a computer using Media transfer mode:
1 Make sure Media transfer mode is enabled on your phone. It is normally enabledby default.
2 Connect your phone to the computer using a USB cable.
3 Computer: Once the phone name appears on the screen, click Networkconfiguration and follow the instructions to pair the computer.
4 When you are finished pairing, disconnect the USB cable from both devices.
The above instructions only work if Windows® 7 is installed on your computer and the computer is connected to a Wi-Fi® Access Point via a network cable. (i have win7 x64 and my PC is connected to the Wi-Fi router via LAN)The problem is i can't get past step 3, as soon as i connect my phone to the PC the PC Companion recognizes it and there is no Network Configuration options availible like the manual said there would be. When i go to the Connectivity settings it says "No trusted hosts". Do i need to port-forward some port, If yes i know how to do do it, but i don't know which port.
My wifi not connecting to any router....
View 1 Replies View Relatedjust bought a xperia ray today and it seems to connect to my network and then straight away it disconnects again - i'm not really sure what the problem is. i have rebooted my router and rebooted my phone both to no avail.i think its werid because its finding the network just not actually connecting.
View 2 Replies View RelatedIn my xperia 8 says "Mac address not available" Is there any way to know what the mac adress? I need the mac address to connect to wifi.
View 2 Replies View RelatedSince I moved to android 2.1 I've not been able to connect to the wifi at my work, even though it worked just fine on 1.6.(old forum posts I've found ages ago suggested that a similar issue occurred on android 1.6 but there was some kind of patch that fixed it. Is something like this available for 2.1 now?)
View 9 Replies View RelatedToday I uploaded the firmware through Sony PC Companion to Android Version 4.0.4 build 4.1.B.0.587. After that my wireless connectivity that was working fine, stopped working.
My Wifi is secured and before I give the password, it says the signal strength is Excellent. After that, it says Signal strength is Poor and tries to keep connecting.
I bought an Xperia Ray last Saturday because my HTC Salsa was struggling to connect and stay connected to my home wifi and also had internal memory problems (not enough internal memory)..Now I'm having different wifi problems with the Ray.It connects but the connection is very slow although nothing else is accessing the wifi and when my husband connects with his Samsung Galaxy it is fine and very fast. Every time the screen light goes out (set to every 10 mins at the moment) it seems to drop the wifi connection and when I "wake " it again it has just the mobile connection but starts to connect again straight away, unfortunately this is not fast.
View 2 Replies View RelatedI have a Sony Xperia Z2 running version 4.4.4.
The problem is that when I create my wifi hotspot for connecting my computer to, with network will be created but no internet is available over the connection. I've tried to connect multiple devices to my phones hotspot and none of them are able to access the internet.
I bought my Xperia NEO few days back and m having Wifi connection problem. My mobile detects a network properly but when I connect, it shows status Conecting, then it switches to Scanning and in the end shows Disconnected. I've tried it on several hot spots but to no avail. Whether it is sensor problem or some software issue or what shall I do.
View 2 Replies View RelatedWhy can't I connect to my wi-fi network?
View 5 Replies View Related"unfortunately captiveportallogin has stopped" Can not login to the wifi network
View 6 Replies View RelatedI'm using Xperia mini Pro. Android 2.1. I see my wifi scanning but it never finds a network. Also the battery is been used by wifi. But I cannot find any network.
View 6 Replies View RelatedOut of the blue my phone is not connetcting to my office wifi. It keeps showing that the network is out of range even when my ipod and all of my colleagues are able to get a clear and strong connection. I had updated my phone to ICS a few days back. Could it be because of this?
View 6 Replies View RelatedI just got my new xperia x10 mini and I tried to search my adhoc security enabled WiFi network, but unfortunately the phone didn't find it. Any got any idea what the problem can be?
View 6 Replies View RelatedI still have to wait for full-functionality on my X10 when the service provider gets updated to a new contract in a few weeks.However, I cant get it to connect to my home wi-fi network.It recognises the network and remembers it. The Network Key is good. Ive tried both with and without 'data traffic enabled', and of course the phones Wi-Fi is turned on- Ive tried that both through the main screen and through the Wi-Fi Settings screen.I got a shock bill last week because the phone was using dial-up connection instead of Wi-Fi without me realising it!Also, how can I ensure it chooses unsecured or 'FreeZones' when on the move over dial-up? I want to be able to use the Navigation function, but worry about the phone being connected too much, even with the internet bundle I am subscribing to.
View 9 Replies View Relatedi cannot connect to wifi network..what's the problem?/since in this forum i've read the same problem like me
View 1 Replies View Relatedmy xperia mini st15i is not detecting any device via wifi. The wifi works when i switch it on hotspot mode and it is detected by other devices also but when i simply switch on the wifi to access internet from any wireless server neither it detects the other network nor its network is detected by other.
View 2 Replies View Related