My Nokia Mobile is N97 and it has the firmware version is: 12.0.024. I am able to put the SIP settings, also I am able to register on the SIP server (the provider), but I do not have the IP Tel to do dialing using SIP. What is the solution? Fring, Nimbuzz and other 3rd party product: these days they require to use their own service, and they are not open for generic service to be used, also they have a bad quality.
I would to use the Nokia Built in, which is very good and it support g729 codec. So what is the advise to resolve this issue for N97? The fun thing that previous models have SIP client as settings and dialer.
I need help for this issue when I am trying to get balance from my mobile by dialing *129# /*130# in my phone at Qatar (qtel- service provider), no response, then i followed steps provided here and downloaded ussd pad editor & tried in it but the editor gets hanged & no response.
I recently just got my N900 back from Nokia USA repair on the 21st of August 2010. Upon receiving it back, they notified me that they had flashed my phone and installed the latest software updates on it per privacy policy, which is understandable. However, all was fine until I tried making a call, when I realized that the screen no longer automatically shuts off / turns on when either placing it or removing it from my face.When dialing a phone number, the screen automatically shuts off and I have to unlock it from the bottom. It is unresponsive to touches, etc, until I unlock it.
When the screen is on during a phone call, it doesn't shut off unless I lock it from the bottom.When receiving calls, the screen never lights on and I can't see who is calling me unless I unlock the phone first.I have tried flashing it with the latest Maemo 5 USA image, but the problem still persists.
Whenever my 5800 Xpress Music connects to a wired or bluetooth headset it starts 'Speak now' voice dialling which sometimes accidentally starts a call to one of my contacts and I'm unaware of dialling out until the recipient answers the call. I've checked the forums and instruction manual but switching voice dialling (or commands) off doesn't seem to appear anywhere.
I have a very irritating problem with nokia 5230 with the latest firmware version. The screen keypad gets locked when I dial a call or when I attend an incoming call with the green call receive button. however when I lock it and unlock it back, the screen keypad gets unlocked. Im not sure if the issue is because of the latest firmware. Is there any way I can move to previous firmware version.
I'm having problem dialing from contact list and recent calls. I can only makes calls when dialing the numbers. I can receive calls. Texting works fine from contact list and recent calls, but voice call can only be done by dialing the number .Phone has to reboot everytime it happens.
since updating the sofware (knew I shouldn't have done that!) I can no longer dial people in the contacts by name, it is like the phone is searching a different contact list than before but I only have one contacts list.
Previously I was using the original firmware which was current as of December 2009 and didn't have any real issues with my phone. Now I have the latest firmware, I cannot seem to use voice dialling effectively anymore. It either says "No match found" or dials the wrong person. I think I remember doing a voice training exercise when I had the old firmware in which I said lots of different people's names but can't seem to find that on the new firmware. Has this feature been removed or relocated with the latest firmware update?
before update I could use smart dialing (meaning by entering member/letters while dialing phone was searching matching contacts and displaying the ones that do match). After update this stopped working. I still have an option to turn smart dialing on/off (when turning on/off I see a change on the screen - the part where numbers show up gets bigger when smart dialing turned off) but there are no suggestions displayed when entering numbers.
I have a Nokia 500 since last week. I would like to create a shortcut to speed dialling, but only applications, first level, are available. In my opinion, it would be possible to choose an option within the application.
I just got this phone last week and am quite happy with it. However, I am now having an issue. I updated the sofware through the Nokia updating system through Ovi Suite and now all of a sudden my 1-touch dialing doesn't work properly. I had #2 setup with a name and photograph, but it got wiped during the update. Now I can't assign any names/numbers to any of the 1-touch spots, it just acts like it does. I double-press the number, it takes me to the contacts list, I press the name I want, then hit Select at the bottom of the screen, then it takes me back to the 1-touch screen but doesn't assign the contact to that number. The same thing when I go to Options>Assign, hit the name, Select. Nothing. Has any body else had this problem? If so how is it solved? I couldn't find any mention of it in these message boards. I do use this feature quite often so I'd like to get it fixed.
I have the following problem with my Nokia 3710 fold. What I press the headset button short the phone tries to make voice dialing, i.e. it listens to some word said and tries to make a fit from my phonebook and then dial it. The problem is that this button is pressed accidentally and then the phone hears some noises and find a "match" - which is basically picking one of the names stored in random - the result is a phone call to some people that I saved their number years ago leading to embarrassing results. I tried to disable this feature. I couldn't. Any feature of the phone can be turned off except this one!! I don't want voice dialing enabled what can I do!
(understandable) leaves a blank voice message. The provider dials my cellphone (innocently claiming that there is a new voice message. When I listen ,it is just blank . This has been occurring maybe 20 times a day since I refilled the prepay sim card last week.
Out of the blue, my phone has started adding +31 before all calls that I make using my contacts list.I'll select a contact that shows the number as "789-789-7890" and when it dials, it will show "+317897897890." There will then be a prompt that says the number can't be reached and I should dial again.This makes the entire contact list function worthless as I have to manually enter numbers in order to call them. All contacts seem to be affected.
When I need to look up the number of one of my contacts, as soon as I click on the name from the list the phone starts dialing the contact. How can I look at the number without dialing?
My last few phones have been SE, most recent was a w760a. When starting to dial it would suggest contacts or recently dialed numbers that could be selected without having to type the whole phone number. Would it be possible to get this on the x10?
I'm bringing my new phone in today for the same problem I had with my last one. The camera is much better than my last one but it's doing the same thing when I'm talking to someone. Yesterday I was talking to a buddy and all of the sudden he was on speaker phone and a Facetime call was started. When I hung up I noticed that the keyboard had pressed the 5 button several times too.My question is there a fix for this? Is it hardware or software? I've read both here and the fact that apple gave me a new phone last time I'm thinking it's hardware.
I am new to this forum and have been quite pleased with my 9700 until recently. For some reason my voice dialing has changed so that now it looks up contacts in last name first order i.e. if I say john smith it looks for a last name "john" This is a new phenomenon that seemingly has been initiated by the device without intervention from me and I can't seem to get it corrected. the contacts folder is sorted by first name.
since the service outage in September/october of 2011. my blackberry has been pocket dialing the same number eventhough I have deleted it from the call registery and contact listing. Also, I have received txt messages that are at least 2years old. How do I make it stop? I have removed the battery, entered the password 10 imes to get it to wipe the memory. none of this has worked. I want to know how does a blackberry take a number and move it to the speed dial registery without me knowing it? When you delete a number from your contacts, why does it not delete the number from speed dial as well? Finally, why doesn't RIM have a 1-800 umber that a person can call, instead of getting the run around. these questions are not for a service provider, they are for the equipment designer.
How do you turn off the voice dialing? It keeps popping in when I am listening to an audio book with the headphones on, and I am unable to turn it off. It can also come in when I am listening to the radio. It is a real pain in the neck.
I just received a replacement Tour 9630. When I activated phone and set up BES it somehow deactivated my number keys for dialing a phone number. Now unless I place a call from my Contacts list I can't dial a number.
I recently purchased my first Blackberry, the Bold 9930. I really love it. My previous mobile was an Apple 3GS. The only real thing I miss about the 3GS and find lacking in my new 9930 is the Bold's lack of an onscreen keypad for dialing phone numbers. The Bold's keyboard is great for typing on but is nowhere near as easy to dial phone numbers as my iPhone 3GS was. Adding an onscreen keypad to the Bold, similar to the one on the 9810 would make the Bold much more user friendly. Especially too people coming over from the iPhone or android phones.
I update my Sony Z3 at 5.0 Lollipop and I don't know if have or can get from market google play the voice dialing? I connect my Phone via Bluetooth at car navigation but don t find Voice Dialing like have before at Samsung S4. I try many application but don t find.
I am trying to make a few phone calls today, and im typing the number in correctly and press the call button, at the top it says dialing, but it is quiet, no noise when you try to call someone, then it just says call ended....
I got a new Galaxy S5 (first Galaxy S anything!) a few weeks ago and I love it. Unfortunately, however, I discovered a very annoying feature just now. While messaging my friend on the Android system messager, I was talking to another friend on Viber. So, since I don't have a bluetooth or headset, I would periodically bring the phone down from my ear and respond to the message. The problem is, if I was still on the message screen and brought the phone back up to my ear to continue talking on Viber, the phone auto dials my friend on the messaging screen. So I accidentally dialed the friend I was messaging several times before I realized what was going on.
Is there a way to input an extension number into a phone number in your contacts list?For example, in an old Nokia, I would have a number saved like 123-456-7890w4587..the "w" was a wait command. The number would dial and the screen displayed "press send to send 4587" (being the extension)Is there a way or command in the HTC Magic from Rogers to do this?
