Everytime I attempted to add my wi-fi network the program crashes and has to restart.The devices that the most recent update. I have uninstalled and reinstalled the program. I have also retarted for the computer and device. why the Motoactv program keeps not responding when I attempted to add a network?
View 7 RepliesI've been trying to set up my MOTOACTV now for days. The first one I had I had to send back since it didn'thave a valid MAC address. I received my new one tonight and now it's telling me it doesn't have a network connection. I've tried different ports, disabled the firewall, all antivirus, etc.
View 3 Replies View RelatedI have seen people having several problems with sync'ing. My problem is probably a variation of the basic underlying problem.I got my Motoactv a couple of days ago. I did a workout, and then tried to sync it wirelessly. I tried several times, but each time it gave me a network error. So then I connected the device to the computer via USB and the sync was successful.The next day, I did a couple of workouts. This time both the wireless and USB syncs failed numerous times. After reading several other posts, I did a factory reset.I then did a workout, and tried the wireless sync, and that failed. I didn't try the USB sync at that time. I went to bed, and when I got up this morning, Motoacdtv said that the sync was successful. So sometime during the night, the wireless sync occurred. I then did another workout today, and then did a USB sync which was successful. Another workout, and then the wireless sync (without intervention) worked.
View 4 Replies View RelatedSo before this last update I think my wifi was always on. When I got back from a run by the time I could get to my laptop the data was already synced. After this update it seems the wifi is off and when I click on wifi settings it says "enabling wifi". How do I turn this off or on so either it always connect to my wifi when in range or stays off until i tell it?
View 1 Replies View RelatedYou can now add a Wi-Fi network to your MOTOACTV using your Motorola Android smartphone with free MOTOACTV app.It's clear in the .78 update that a new wifi network can be added to the MOTOACTV using the MOTOACTV app. But, how? I'm not seeing any way to do it.
View 9 Replies View RelatedI always switch off wifi on all my devices when I don't need to use it, because it's a serious battery drainer, but I can't find an option anywhere on the motoactv that allows me to switch it off! Am I just being really stupid and not looking properly?s all devices allow you the option to switch things like this off or on
View 8 Replies View RelatedI'm having problems with MOTOCAST in Windows XP. It will not recognize any of the 3 wi-fi networks in my home when I search for networks. The computer sees all 3 of them just fine and can connect to any of them. MOTOCAST and my MOTOACTV device work just fine on my work computer (running Windows 7). I can upload to MOTOACTV just fine at work and can see the work wi-fi network. Problem is only on the home networks. Unfortunately, getting on the network at home is most important because that is where I workout. Additionally, I can't sync my workouts to the MOTOACTV website at all from home, not wirelessly and not via USB. MOTOCAST permits me to see the music files on my computer and sync with them but will not sync to MOTOACTV via the web. Not a problem on my work computer.
View 2 Replies View RelatedMy wifi network requires that I enter a user name and password. Is it possible to connect to a network with user name? Can I just change my profile name on the device to be my user name.
View 6 Replies View RelatedWhen try to download my wifi to my motoactv I keep getting the following message: The scam for wifi networks library failed.Check to see that the access point is on and that it is configured with WPA, WEP or no encryption.
View 12 Replies View RelatedWondering if Motorola would consider partnering with Withings so the Scale and the Watch's info are synced?Right now the Scale works on several services like LoseIt and Endomondo. Instead of inputting my weight every time I would like to just weigh myself and have it automatically populate to the MotoActv site.[URL]
View 4 Replies View RelatedMy wireless does not broadcast its SSID - but it appears that the MOTOACTV will only allow you to connect to a WiFi that's broadcasting it.
Is it possible to manually add your WiFi when it does not broadcast the SSID?
I have not been able to connect to my router and keep getting the error incorrect password or other error.I have tried power cycling my router, removing the password, changing the password to something simpler and motoactv stlil cannot connect.I am 100% sure the password is correct and all my other devices can connect to the router fine as well.
View 12 Replies View RelatedAs of today, my month-old Motoactv will no longer sync my fitness data either through a direct USB connection or Wi-Fi network. I've synced many times over the past four weeks both ways without any trouble, but after today's run, I tried to sync and nothing happens. Motocast USB will start up when I connect to my PC, it will attempt to sync, then returns with this message:
Total Transferred files size = 0.0 B
Fitness data sync failed.
Start sync with "MOTOACTV" at 2012-02-26 16:28:28
Syncing Fitness data with the MOTOACTV.com
Fitness data sync failed.
Sync summary
Sync start time = 2012-02-26 16:28:28
Sync stop time = 2012-02-26 16:28:55
Windows OS = Microsoft Windows 7
Device = MOTOACTV
Phone model = F100
USB speed = 2.x
Transferred files count = 0
Total Transferred files size = 0.0 B
Fitness data sync failed.
When I attempt to sync via Wi-Fi, I get the error: "Network Error. Internet Connection unavailable". Everything was working until today. Now, neither options work.
I'm with Shaw Internet and I use their provided router/modem which is located in my room where I'm sitting typing this message. When I go into the Wi-Fi settings on my phone I can't connect to it. (It doesn't even show up on the list.)
I can however see the family router on the list and connect to it. I can connect to the Shaw router/cable modem in my room with my iPhone 3GS. (It displays on the list.)
I've tried to "Add network" > Network SSID / Security > Password etc. But that doesn't work either. It will say "Not in range" which is BS. The router is 10 feet from me.
I've tried to unplug/replug the modem/router to see if it would refresh on the list, but no dice.
I've tried disabling the Wi-Fi on my iPhone 3gs to see if my Razr could see the connection (Figured maybe It's a capacity issue.) But no luck there either.
At the very least I figure it should show on the list. If I take my phone outside I pick up everyone elses network...
can't connect to wifi network with my xzoom
View 2 Replies View RelatedI have Motorola DEXT Motoblur ORANGE and yes it is unlocked...When on home network wifi turns on but no signal. YES i have router ON, also I have tried all over the city to get free wifi or any wifi signal at all and nothing.When on roaming when I travel it works perfect. Signal, multiple networks, internet works great... When I come back to my home network same story again...
Blur 1.3.39.MB200.Orange.en.GB
MB200
Hardware SJUG5731AA
Firmware 1.5
Baseband 76XXC-6380525-SDCBALUM
Kernel 2.6.27
Build nr R6380CP1_035.14
All software is original and no modifications at all have been done to phone.
I am having problems connecting to my home network. The phones wifi turns on fine, gets an IP address and looks fine. However, the wifi and phone strength meters grey out and there is no connectivity to the internet on the phone. The wifi network is WPA protected.The phone worked fine on a different, unprotected, network I found up the street.I have a cliq that works fine on my network.I have tried powering off and powering off in airplane mode, neither of which make a difference.
View 3 Replies View RelatedTraveling with the Xoom wi-fi and it suddenly decided not to connect with open wi-fi networks. Works fine on home network and worked fine on open networks a couple of weeks ago. Now, it sees the network, saves the network but when you tap "OK" to connect nothing happens.
View 8 Replies View RelatedThe phone does not load properly and can not connect to the mobile operator's network when switched on, if it was off with the included Wi-Fi. When you turn on an error. Moreover, in Russia, this error is only at the largest operator - MTS. Replacing the SIMcard does not work?
View 1 Replies View RelatedMy wife and I have identical ATRIX 2 phones just over a year old. Always has been some strange things happening staying connected to wifi network but that finally corrected itself on both phones
After ICS update in November i have to toggle Airplane mode on and off to get wifi connection back after a period of not useing it on my phone .
My wife was reluctant to update hers when I did as she doesn't like change. However over time her phone kept droping wifi network connection. I would have to power it down and remove battery and sim card to get it to stay on wif for a few days. Finaly that was no longer a fix. I went to a AT&T hotspot and downloaded the latest ICS update.on her phone No matter what I do it will connect to our network wifi and bring in mail etc for about ten seconds then the singal bars change from white to blue, The settings menue shows wifi still on blue connected but the signal bars shows blue. Her data use would indicate it is indee using cingular data.
my droid X2 will not connect to my home Wifi network. I have to reboot my router to get it to connect. It tries to connect but displays a message that it is "Getting an IP address" but never connects without a router reboot. This is a big pain.
View 1 Replies View RelatedHow can i set my phone so that it is not always connected to the internet and only accesses internet if a wifi connection is available?
View 1 Replies View RelatedIf Wifi drops or I turn it off, the remaining icons go white, and then if you go to settings, about phone, status, the phone states UMTS and then switches to HSPA, and it states on network "Connecting, or Disconnected" A power Cycle will sometimes help. If I turn wifi back on, I have a Blue wifi, white H+, and a Blue Network Signal strength.
View 2 Replies View RelatedWhy won't my phone remain connected to my home wifi network? It's very frustrating to play Words With Friends when I have to disconnect then reconnect to my network every few minutes. The network signal strength is listed as Excellent.
View 4 Replies View RelatedI have a US WiFi only Xoom with a weird network issue. Whenever I leave it at home when I go to work, I come back to a gray wifi indicator. I'm still connected to my router and can access things internal to my network (like my Sonos system or router), but can't get to anything external (such as pinging an IP address or doing a DNS lookup).
View 1 Replies View Relatedwhen I have both wifi and 4g lte running on my Droid Razr Maxx (still running gingerbread), both indicators are blue. As I understand it the 4g lte indicator should turn white when I turn on wifi, which is what is use to do.
View 5 Replies View RelatedThese days I use my d1 as a wifi only clock radio/bedroom internet device. For some reason gmail no longer syncs on its own. I have to manually sync to get emails.. anything I can do? Screen is always on so I don't know why it doesn't sync
View 1 Replies View RelatedIf I unmask my WiFi network, I can connect to it with my Droid Razr.
If I turn off broadcasting, I know its still there - I have laptops and an iPhone that still find it an can connect to it. But my new RAZR doesn't seem to know how to locate/connect to it .
What settings do I need to change to get this to work.
My Xoom post upgrade to 4G is now assigning the IP address of 192.168.20.1 to the device usb1 everytime it is rebooted. This apparently hardwired configuration conflicts with my homenetwork's default gateway.Is there anyway to change this with out rooting the device? I would rather not have to re-IP my home network or not be able to connect to any network via Wifi who uses that IP address as a default gateway.
View 15 Replies View RelatedIs it just me or is anyone having problems with data syncing to the Motoactv.com portal today?
View 2 Replies View RelatedI have been trying to download gold courses for 2 days now and can't figure it out.My device keeps saying "Downloading" and nothing is happening.
View 14 Replies View Related