I'm with Shaw Internet and I use their provided router/modem which is located in my room where I'm sitting typing this message. When I go into the Wi-Fi settings on my phone I can't connect to it. (It doesn't even show up on the list.)
I can however see the family router on the list and connect to it. I can connect to the Shaw router/cable modem in my room with my iPhone 3GS. (It displays on the list.)
I've tried to "Add network" > Network SSID / Security > Password etc. But that doesn't work either. It will say "Not in range" which is BS. The router is 10 feet from me.
I've tried to unplug/replug the modem/router to see if it would refresh on the list, but no dice.
I've tried disabling the Wi-Fi on my iPhone 3gs to see if my Razr could see the connection (Figured maybe It's a capacity issue.) But no luck there either.
At the very least I figure it should show on the list. If I take my phone outside I pick up everyone elses network...
The phone does not load properly and can not connect to the mobile operator's network when switched on, if it was off with the included Wi-Fi. When you turn on an error. Moreover, in Russia, this error is only at the largest operator - MTS. Replacing the SIMcard does not work?
Having a new problem finding and connecting to wifi hotspots / routers. When phone was new it used to find a list of available networks very quickly and connect to previously used networks without a problem.Now (only a few weeks old) the phone takes 2-3 minutes to "scan" for networks, then takes another 30sec or a minute to connect.Can't think of any settings I've changed which might have caused this. Have not installed any 3rd party wifi apps either.
when I have both wifi and 4g lte running on my Droid Razr Maxx (still running gingerbread), both indicators are blue. As I understand it the 4g lte indicator should turn white when I turn on wifi, which is what is use to do.
If I unmask my WiFi network, I can connect to it with my Droid Razr.
If I turn off broadcasting, I know its still there - I have laptops and an iPhone that still find it an can connect to it. But my new RAZR doesn't seem to know how to locate/connect to it .
What settings do I need to change to get this to work.
I upgraded my iphone 4S to 5.1.1 yesterday, and it cannot find any wifi network after that. It is not that it cannot join in any network, but it cannot *FIND* any wifi network. I reset the network settings, restarted the device, and it does not work. I could still use the 4G network.
I'm using Xperia mini Pro. Android 2.1. I see my wifi scanning but it never finds a network. Also the battery is been used by wifi. But I cannot find any network.
I'm not understanding how to find the wi-fi password. When it finds a network, it asks me to enter a password. How do I know what to type in?? I have searched online and the darn user guide and everything just says 'type the password in'. What password?! Where do I find this? In the alternative, if it doesn't find a network it says "choose a network" and then wants a name/security/password.
I am trying to connect to my home network which I always do but my phone cant find the network I dont know why, I tap on "other" and then I type the networks name and a message pops up saying "could not scan for wireless networks"
Me and my friends are traveling aborad now. My iphone's wifi was working even yesterday. but from today my iphone can't find any wifi from the same network i was using in this hotel yesterday. My friend got the same iphone 4 and his wifi is working properly. i did reset my network seetings, updated to IOS 5.1.1 and restored my Iphone but result is still the same.It can't find any wifi.
It all started on 5.1.1. I flashed a new build of carbon and suddenly it was searching for WiFi constantly and not finding it at all. So I did a clean install of exodus and then cm 12.1. So I went back to stock locked my boot loader on 6.0.1. The WiFi issue still persist.
Is there a known issues with the 950XL (or Win 10 in general) regarding wifi stability. My 950XL refuses to stay connected to the 5.0GHz wifi network. After reboot it will find and connect to the network fine, but after about 10 to 15 minutes the connection drops. When I go to the available wifi list, all the 5.0 GHz networks are missing and only the 2.4 GHz ones are offered. The only way I have found to get the phone to find the 5.0 GHz ones was forcing a reboot.
I have WiFi enabled. Often when I am near a wireless access point, my RAZR M still uses 4G. It's as if the WiFi is going to sleep when I power the screen off, but it doesn't wake up again. Turning WiFi off and on makes it reconnect.It seems to happen mostly when I'm at home, where I also use the Motorola flip stand with "ESP" smart charger, and a NetGear dual-band wireless router/access point.
My other half gets an error on her Razor Maxx phone that says " Network error please check the network" . It comes up just about every time she does anythign with the phone. She called the provider and did troubleshoot it and they say nothing is wrong with the settings and network. Almost say that it isn't happenning. This has become quite annoying and I've seen it myself. I have same phone and no issues with mine at all .. we purchased at same time and did upgrades at same time as well
My new Xoom doesn't find any WiFi network. Where I am currently, there are at least three networks in reach, one of them is completely open. Neither of them shows up on the list of available networks.
If I set up mobile hotspot on Xoom, I can connect other devices via WiFi to Xoom, which leads me to believe hardware is ok.
I was trying to start the navagation app and select an address from Contacts to get directions. The response was no contacts have an address. The work around is to start up MAPS, find an address and then in the MAP app, select navigation. Is this how it is suppose to work? If not, is there a fix?
I have a few apps on my phone that can't locate the sd card. The most important of these (to me) are apps that are designed to read or import csv files and create little databases from the data.
All of them look for files on the sd card automatically and report that none are present (of course, I know they are because I put them there). One of them offers the option of searching for the files manually. When I do, instead of displaying the contents of my sd card, it displays the contents of my internal storage. I suspect that's where the apps that search automatically are looking as well.
I tried dismounting/remounting the sd card. Didn't work.
Yesterday I spoke to a second tier Motorola support agent. He tried various things by taking charge of my phone remotely, then did a factory reset. No joy. He said that in his opinion, the apps (all four of them) are at fault.
One of those apps worked perfectly under Gingerbread. I downloaded the other three when it stopped working after the ICS upgrade.
I had a similar problem with an mp3 player when it tried to automatically find the mp3 folder on my sd card. Did the same thing: examined the internal storage instead, even though I chose the option to search the external card. Fortunately, that app also had an option to search manually, and that function saw the sd card.
These data apps are very important to me. One developer said he's working on an Ice Cream Sandwich upgrade. The other developers haven't replied, though their sites claim that their products are compatible with Android 4.
Is this an operating system problem? A device problem? Is there a way to "tell" apps the path to your sd card? The names of the apps: Panacea Database, Sailforms, Memento, Collector.
If anyone else using a Razr Maxx running Ice Cream has found an app that can successfully import a csv file or read an mdb file (Microsoft Access) on the sd card
I plugged it in to the computer tonight to see what exactly was in the double folders that I can see in the gallery. My computer can't even find the device. Went to Moto's site and downloaded drivers and installed them. Nope. Cannot find device. Ok. Son plugged his phone in - nope no device found. My computer runs XP. His computer runs Win 7 and he also has a Maxx with JB update on it that he got the same time I did. His opens Motocast and that is it. No drive letters. So on a whim, we took both phones to my granddaughter's computer running XP also and hers found all the drives on both phones. Is there a setting I am missing? We didn't change anything when we went to her computer..just plugged it is and it found the device and opened all the drives.
I received the ICS update...everything has been fine but today i have no network. No bars, no 3G/4G/1X....i get a message that tells me a CDMA network cannot be found. Right now I have one tiny bar but that's all...
I lost my data signal AGAIN while uploading a picture from Facebook. Now I have this orange triagle in the upper left corner of my screen and on the drop down menu is says "Download requires network" which I can not get rid of.
My network / operator name is constantly displayed in the notification area. How do I remove it? None of the previous Android phone I've had have displayed the network name here.
After installing an app called WIFI Analyzer and seeing all the AP's in my neighborhood I wanted my home network in a less congested area of the spectrum. I changed my home network and now I can't see my AP? The only thing I can think of is that the Razr Maxx does not support 5GHz as I see from the product spec page that N networks are supported.
Is this phone supposed to connect automatically via the mobile network using Motocast? Works on WiFi but not when out of range. Is there a setting hidden somewhere that I've missed ?
I can't find information about the 4 USB connection modes. When I plug in the usb cable I see PC Mode/Windwos Media Sync Mode/USB Mass Storage/Charge Only.The charge only mode is self explainatory. What are the other modes for and which one should be default when using MOTOCast sync or windows media player sync? I'm suspecting if I want to do a straight file copy I'd pick the Mass Storage mode?can I choose a default or will I always have to pick one?
I've had no data connection all day, only voice and text, but 3G only phones work fine. Called Verizon and they only gave me a refund for no data today, but wouldn't say why or how long. I guess its on there end since they didn't even try to see if my phone was the problem.
I've tried calling Verizon, but they won't open a ticket because of a known issue with the .173 update, but everytime I enter a extended network area, I quickly lose data connection. It seems like I hear of quite a few people in my area having this problem. Verizon pushed a hybrid PRL to my phone and the PRL version went from 15098 to 13014. Am I going to just have to wait till they actually send someone to fix a local tower or is this something nation wide?
No matter whether the clock is set by the network; or it is set manually; the time is 14-15 seconds ahead; and no. setting it manually will not fix the problem.
