Lumia 1020 :: How To Connect To WPA2 Enterprise Network On Phone
Sep 13, 2013
How to connect to my company's WPA2 Enterprise WiFi. I have tried this multiple times and it never gives me the option of inputting my username and password for my network.
Steps I took: Settings--Wi-Fi--Advanced--hitting the "+" at the bottom of the page--entering the name of my Enterprise network--it asks for my password BUT it never prompts me for my username, which is required to log in.
Before it's asked: I have the latest firmware installed on my phone. This network has allowed multiple iPhones to connect and an old HTC incredible phone.
I have tried every single combination --- just doesn't work. It's 2010! iPhone and Andoid phones, I just have to enter my username and password, and everything just works. I go through a million hoops and yet on my e71 this network simply seems impossible to connect to!
I just got my Lumia 1520 handy but when I tried to connect it to the local Wifi hotspot (WPA2 encrypted), it times out saying "Connection unsuccessful - No response from the network". I searched the net for solutions and based on those, I restarted the Wifi Router, my Lumia 1520. Also I did a factory reset of the device.
But still, it is unable to connect to Wifi hot spot.I also tried connecting with another Wifi hotspot (WPA2), but nothing good happened. My other devices like Surface, Lumia 1020 are able to connect to the same hotspot without any issues. There is no restrictions on no. of Wifi connection as I am broadcasting the Wifi from my laptop (Windows 8.1 Update 1) as a virtual wifi hotspot.
I have tried to connect my lumia 1020 to PC and it's not recgonize it's connect only as charger .. it was good but now i didn't know what happen .. i tried all things likes :
restart my phone restart my pc install windows phone app ( didn't recgonize phone as connected )
My Nokia Lumia 1020 will NOT connect to my surface pro 2. I have looked high and low on the internet for a solution. The problem in my opinion lies in the detection and installation of the drivers to the SP2. It plugs in and charges but the computer doesn't detect that there has been anything plugged in. Nothing shows up in file explorer or device manager. But my old Lumia 920 was recognized. Here are a few of the different solutions that I have tried and have fail to fix my problem.
Soft reset when plugged in to install the missing drivers (failed) Switching different cords to make sure I was using a data cable (failed) Tried plugging it into multiple different PC's and even a mac (failed)
The stupid phone will not show up anywhere! I am running Windows 10 mobile but I have had this problem in 8.1 for over a year since I bought the phone. This even happened with my first Lumia 1020 I owned when the phone first came out! (Which shattered)
I think the root of the problem lies in the hardware of the phone itself. My guess is the USB port is damaged so it doesn't fully read or something along those lines. It takes a good 5 hour for a charge which seems long to me but I'm not sure.
I have linksys wrt54GL router at home, wifi is set to WPA2 Personal + AES. I cannot connect to wifi with e63 phone. I have e72 also and it connects without any problem. Could someone post step by step tutorial?
So my Nokia Lumia 1020 was upgraded to 8.1 via Preview for Developers a few months ago and Wi-Fi/Cellular data was fine. I updated to Lumia Denim at one time and for some reason, Wi-Fi did not work. I tried using the Windows Phone Recovery Tool 2.1.1 and Wi-Fi still did not work. Then I downgraded from Denim to Cyan, and Wi-Fi still didn't work. I tried the Windows Phone Recovery Tool (same version) again, and Wi-Fi did not work.
In addition, I tried adding my Wi-Fi as a hidden network. Still didn't work. By the way, my Wi-Fi is WPA2-PSK, and I have AES encryption.
So here are some specs of my Lumia 1020:
OS version: 8.10.14226.359 Firmware revision number: 3051.50009.1451.1001 Model: NOKIA 909 Carrier: AT&T Software: Windows Phone 8.1 Update
I can't connect my Lumia 1020 to my PC. When I cable it in, I see in device manager under "other device" that the phone is listed with a yellow point. I tried to uninstall it and the replug it in but this does not work. I followed the instructions at: support.microsoft.com/en-us/kb/2749484 but without success. My phone still won't be recognized.
My girlfriend and I went on a big trip around Europe recently, and she has a Lumia 1020 (I have a Lumia Icon). Over the last few months, she has not been able to back up her data, apps, photos, etc. properly. It has been hit or miss.
Now, she wants to connect her phone to her computer to import the photos and videos to her computer. However, connecting her phone does nothing other than charge it. No prompt comes up, no device is recognized, not even in device manager. Nothing happens at all. It only charges.
Microsoft suggested a hard reset of the whole phone. But that would mean losing all of the data she has, including the very important photos from our trip. They suggested to back up to the cloud, but OneDrive backups have been unreliable, as only some of her photos actually get backed up, and when she tries to create a new backup of settings+apps, it gets to 100% and then says there was a problem and fails.
save my lumia 1520. I made the mistake of flashing my lumia 1520 (RM-937) with a lumia 1520 (RM-938) ROM ever-since my phone started acting out. I flashed the phone back to its original ROM which is Hong-kong ROM with windows phone recovery tool, it has not fixed the issue. The phone does not connect to GSM network anymore. It appears that the band might have been messed up.
I am using Nokia Lumia 1020. It has been having a trouble auto connecting Flight Mode. I can not use my mobile as a result of that. It connecting automatically WIFI connection as well. I can not off both Flight Mode and WIFI manually as they connecting automatically.
I apologize in advance if I sound like a complete **bleep**. I have a blackberry 8520. My wireless router is Dlink and the security level is WPA. I am unsure how to connect my Blackberry to my personal wireless network. I do not have a lot of data available on my phone because I don't want my mom to have to pay more each month(BTW I'm 14 and even though I've had a Blackberry for three yeas I'm not a genius). When I Scan for Networks, my network pops up. When I click it, a message pops up saying," This wireless router supports Wi-Fi Protected Setup. To connect using a PIN(which you Blackberry will generate). click next." When I click next it says," Provisioning Wi-Fi Profiles... Enter this PIN into your wireless router:........" and it gives me a time limit. I'm am unsure how to enter this into my router. In addition, is there a way to just manually add the network? If so, for either way, can someone please give me a step by step on what to do.
I have strange issue with my phone. Calls on my phone drop almost certainly when I'm on 2G network. When on 3G this rarely ( or almost never) happens.
Same sim card works very well in other phones. This is issue is just on 2G network. I do not get 3G network every where so i cannot ignore this issue.
Nokia care unit says this phone might have hardware issue and quoting about same amount of repairs of cost of new phone. They claim this needs to be sent to factory for repairs.( this phone is out of warranty in region where I am using it).
So my Lumia 1020 ran out of battery for the first time since I have owned it yesterday, no problem I will simply charge it.
Then on boot it loads the Access Point screen asking me to pick my network (EE already chosen which is correct)... not a problem but why has it done this? It does this whenever I turn the phone off and on again...
WIFI Name: DAS Security Type: WPA2 Personal Encryption Type: TKIP Password: well thats not gonna help you help me in anyway. These are infos from my win7 computer.
now everytime i try to join it in my X6 it says invalid WPA preshared key. And i know i have and i used the right key for this. What could be the problem. Has this happened before? And in Destination, I tried setting that access point so that it uses WPA2 and also added the preshared key, but when i try to connect in WIFI manager, it asks me for that preshared key again even though I already set it up.
So I recently got my iPhone 3gs to work again which is great but when ever I try to connect to a WPA2-PSK wifi network it will say "Unable to connect" even though I have entered the correct password multiple times.
I just have to enter my username and password, and everything just works. I go through a million hoops and yet on my e71 this network simply seems impossible to connect to
Starting just in recent days, whenever I try to connect to a WiFi network I get the message "Can't Connect. The WiFi network <network name> didn't respond. Try again later."
Other devices, including other Windows Phones, are connecting to these networks no problems.
Last night, I saw an article about driving mode and thought I'd set it up on my 1020 to try it out. (It would let me stop notifications of texts while I'm driving, but still take Bluetooth calls.)
Today, my phone wouldn't connect to my car's Bluetooth. I decided to disable driving mode as it was obviously causing the problem, but the on/off option was greyed out.
Eventually, after a lot of to-ing and fro-ing, I decided the only option was to reset the phone to go back to driving mode not being set up. You can imagine what a hassle that was. But the phone still doesn't recognise my car, or, it seems, any other Bluetooth devices.
It is galling, because my new car (a Mini Cooper) doesn't have a Cd player, so Bluetooth is the only way I can play music.
I am trying to connect to a WPA2 wifi network at one of my company's offices and having no luck. My Droid sees the network SSID and treats it as a WEP secured network, so it only provides me the ability to enter the WEP password and not the whole range of WPA2 credentials. I have tried pulling up all advanced options I can reach from the WiFi screens without finding a way to change this. I have ICS on the phone.
I'm having some weird issues with the WIFI connections when my phone is on airplane mode. I can't connect to both of my home WIFI - 2.4GHz and 5GHz. Both of the SSIDs are not being displayed at all, until I turned off airplane mode. However, both my Nexus 7 (2013) and HTC One are working fine with their airplane modes.Is this some crazy limitations of Windows Phone again?
A few months ago, I dropped my phone (the day before my case came in the mail, of course) and the screen went fuzzy, much like an old box tv for several minutes, then rebooted several times before catching up to itself. I'm not sure what on earth happened because of this drop, but since then I have had a huge amount of issues.
First- I cannot complete certain updates on my phone, including some system updates such as for "extras+info" and "Lumia Camera". I get the error code 80070539 on these failed updates, but I do not believe that is the real reason these apps will not update. One method I used to fix this was to make sure I accepted updated terms and conditions for Microsoft, which completed some updates, but I still have several left waiting.
Second- Several apps and processes just do not work at all. Example: settings>applications>photos+camera the screen begins to flip over to the photos+camera menu, then abruptly stops before returning to the applications menu. This exact scenario happens to several other processes throughout the phone, including the calendar app, adding new emails and accounts, etc.
Third- I cannot backup my phone. This is a major problem as I have an abundance of files that I desperately need on my phone, but whenever I attempt to backup my phone, it may make it up to 97% maximum before it says the backup failed. This is the primary reason I haven't attempted a hard reset yet, and I would prefer to avoid doing a hard reset unless we can manage to fix at least the backup issue.
Fourth- My computer will not recognize my phone. I am running a laptop with Windows 8.1, all my drivers are up-to-date, I've uninstalled/reinstalled drivers, etc. but the computer doesn't even recognize that I plug the phone in, even though my phone still charges at a normal rate. I have also tried different computers and different cables. Nothing has proven useful. There is not a place in my computer that I can find a trace of detection of my phone, not under devices/drives/anything.
I will try just about anything that doesn't involve losing all of my data.
I had 3G connection until today afternoon. To check if the Cyan update is available, I changed the region to US and back to India. After this the phone is not connecting to cellular data network, even though I can make voice calls. It connects to Wi-Fi without issues. So far I have tried the following -
1. Soft reset (power and volume down) 2. Change region back and forth 3. Hard reset (twice)
Internet APN is set to internet, but still no connection and the status bar is not showing E/3G or H+.
Received my Lumia 950 XL with Windows 10 last week, and all so far so good. However, I have a few clients that a visit regularly that use hidden WIFI networks or networks that do not broadcast. These normally have to be setup manually on the device, but I can't find anywhere in Windows 10 phone settings to deal with a manual wifi connection setup?
I recently bought a Nokia 1020 and i suspect that there are something wrong with the camera. The quality of the photos that i take are, in my opinion, nowhere near the ones you can se in reviews and those released by Nokia.
To me it looks like it's only the middle part of every photo that is correctly focused. The edges are very blurry. I have no case on the phone, no dirt on the lens and i have tried to reset the camera and reboot, no difference.
I will attach some photos on which I think you can see it clearly. The images are very sharp in the middle but when you move towards the edges it quickly becomes blurry. Both pictures are taken in daylight with Nokia Pro Cam, all settings on auto.
The pictures are the high resolution version: FileSnack | Easy file sharing FileSnack | Easy file sharing.
New to the Windows mobile phone... I use my Windows phone for business and do a lot of conference calls. With my iPhone I used to be able to put the phone number with three commas and then the passcode to the conference call in the meeting request (format = 555-555-5555,,,12121212#). By using this format my customers could just click the link in their iPhone and it would auto-dial the conference number along with the passcode so that they did not have to remember the passcode while driving.
Example: 555-555-5555,,,12121212#. (autohyperlink for iOS) VS 555-555-5555 Passcode 12121212 then press # (caller can hyperlink the phone number but has to remember the passcode and dial it while driving...)
By using this format you could just click the number and it would dial the number pause then auto add the passcode and # to enter the conference call. I think Blackberry used to use a similar format to achieve the same thing.
Yesterday, I went running with my Lumia 1020 listening to music and using the Runtastic app. The music stopped - I looked at the phone - it was turned off. I tried powering on, but to no avail. I should also mention that upon leaving, the battery was fully charged and this happened after some 20 minutes. When I came home, I immediately put the phone on the wall charger and expected it to power on after a while. I checked it after 3 hours and nothing, the phone was still stone-dead and what was even more worrying, completely cold - no heat-up from charging.
I tried connecting it to my PC - the computer didn't even recognize ANY device was connected to it. Just to be sure, I tried Nokia Software Recovery Tool, but sure enough, it was not able to detect the phone. The phone seems to be dead meat now, but when I put it on my desk wireless charging stand, the stand's indicator lights up, although the phone does nothing and stays that way.
