I have linksys wrt54GL router at home, wifi is set to WPA2 Personal + AES. I cannot connect to wifi with e63 phone. I have e72 also and it connects without any problem. Could someone post step by step tutorial?
View 2 RepliesWIFI Name: DAS
Security Type: WPA2 Personal
Encryption Type: TKIP
Password: well thats not gonna help you help me in anyway. These are infos from my win7 computer.
now everytime i try to join it in my X6 it says invalid WPA preshared key. And i know i have and i used the right key for this. What could be the problem. Has this happened before? And in Destination, I tried setting that access point so that it uses WPA2 and also added the preshared key, but when i try to connect in WIFI manager, it asks me for that preshared key again even though I already set it up.
I just got my Lumia 1520 handy but when I tried to connect it to the local Wifi hotspot (WPA2 encrypted), it times out saying "Connection unsuccessful - No response from the network". I searched the net for solutions and based on those, I restarted the Wifi Router, my Lumia 1520. Also I did a factory reset of the device.
But still, it is unable to connect to Wifi hot spot.I also tried connecting with another Wifi hotspot (WPA2), but nothing good happened. My other devices like Surface, Lumia 1020 are able to connect to the same hotspot without any issues. There is no restrictions on no. of Wifi connection as I am broadcasting the Wifi from my laptop (Windows 8.1 Update 1) as a virtual wifi hotspot.
I am trying to connect to a WPA2 wifi network at one of my company's offices and having no luck. My Droid sees the network SSID and treats it as a WEP secured network, so it only provides me the ability to enter the WEP password and not the whole range of WPA2 credentials. I have tried pulling up all advanced options I can reach from the WiFi screens without finding a way to change this. I have ICS on the phone.
View 1 Replies View RelatedHow to connect to my company's WPA2 Enterprise WiFi. I have tried this multiple times and it never gives me the option of inputting my username and password for my network.
Steps I took: Settings--Wi-Fi--Advanced--hitting the "+" at the bottom of the page--entering the name of my Enterprise network--it asks for my password BUT it never prompts me for my username, which is required to log in.
Before it's asked: I have the latest firmware installed on my phone. This network has allowed multiple iPhones to connect and an old HTC incredible phone.
I want to use my WLAN at home with the Elm. But my network has a WPA2-Personal Key. And it seems, that the Elm doesn't support this key. Just WPA-Personal. But I don't want to change the key in my router, because the WPA-Personal is not really safe. Is it possible to load the support for the WPA2-Personal into the Elm, or is there a software update coming?
View 1 Replies View RelatedI apologize in advance if I sound like a complete **bleep**. I have a blackberry 8520. My wireless router is Dlink and the security level is WPA. I am unsure how to connect my Blackberry to my personal wireless network. I do not have a lot of data available on my phone because I don't want my mom to have to pay more each month(BTW I'm 14 and even though I've had a Blackberry for three yeas I'm not a genius). When I Scan for Networks, my network pops up. When I click it, a message pops up saying," This wireless router supports Wi-Fi Protected Setup. To connect using a PIN(which you Blackberry will generate). click next." When I click next it says," Provisioning Wi-Fi Profiles... Enter this PIN into your wireless router:........" and it gives me a time limit. I'm am unsure how to enter this into my router. In addition, is there a way to just manually add the network? If so, for either way, can someone please give me a step by step on what to do.
View 2 Replies View RelatedESSID (Network Name): <whatever>
Network Type: Infrastructure (or Access Point)
TCP/IP: DHCP
EAP Type: PEAP
Network Authentication: WPAWPA2
Data Encryption: TKIP/AES
Authentication Method/Protocol: MSCHAP-V2
Inner EAP Type: EAP-MSCHAPv2
I have tried every single combination --- just doesn't work. It's 2010! iPhone and Andoid phones, I just have to enter my username and password, and everything just works. I go through a million hoops and yet on my e71 this network simply seems impossible to connect to!
Wifi won't connect anymore. My IPhone will not connect to my personal wifi. I have tried 'reset network settings'. It didn't work. My iPhone, however is still at version 6.1.3.
View 4 Replies View RelatedI know this has been working before, and I really need to connect my iPad via Bluetooth to my iPhone so that I can then use the Wireless via my iPhone. Unfortunately, every time I connect to the iPhone via Bluetooth the WiFi on the iPhone disconnects.
Info:
iPhone 4S, iOS 5.1.1
So I recently got my iPhone 3gs to work again which is great but when ever I try to connect to a WPA2-PSK wifi network it will say "Unable to connect" even though I have entered the correct password multiple times.
Info:
iPhone 3GS, iOS 5.0.1
Connect to WPA2-EAP ent wifi networks is not working.
View 9 Replies View RelatedI just have to enter my username and password, and everything just works. I go through a million hoops and yet on my e71 this network simply seems impossible to connect to
View 19 Replies View RelatedCan the Curve 8320 access WiFi with WPA/WPA2 encryption?
View 9 Replies View RelatedMy Photon sees the network and allows me to enter a password, but then attempts to connect, scans again and boots me out. The message it says that the network is disabled.
View 2 Replies View RelatedI've had the 808 since the initial release in India, i.e since August 13. Got it replaced once for the purple tint issue. Though the replacement set has some issues with touchscreen response, but I've learned to live with it. And everything else was working fine, till about a week ago.But now my 808 cannot connect to Wifi, randomly (quite often, actually). If I enable the wifi and go to the Wifi main page, I can see my home network being detected and shown as "Known". I tap on it to connect, it says "Connecting" for about a second or even less than that and then says "Known" again. I've tried tapping on it many times, but it just doesn't connect. Tried different connections of wifi, i.e. joikuspot from my N8, cannot even connect to that. Disabling and re-enabling the Wifi don't work either.
To make Wifi work again, I have to reboot the phone every time the problem arises. It's really annoying, since I use a lot a Wifi.Sincerely,SabbyjHit the kudos button if I was of any help to you. And don't forget to mark the solution if I get one.
As I understand (at least is what the user's guide describes), the N97 connects to WiFi via 802.11b/g...Anyone knows if there is a way to connect the phone via 5Ghz WiFi connections?I have too much equipment in my house using the 2.4Ghz channels (bluetooth, PS2 controllers, etc), and I'm using a WiFi router in 802.11a/n with 5Ghz range to lower the interference.
View 4 Replies View RelatedI've been using Samsung S5620 Monte (S5620 Onix in Spain; S5620 Star 3G in Brazil) for a few days now. It's a nice phone, but I can't get WiFi to work in WPA2-PSK(AES) mode with my DLink DI-524 wireless router. I can get the phone to connect in open, WEP or WPA modes, at home and also in public wireless networks, but there's no way to get it to work in WPA2 mode (which is my protocol of choice).
My wireless router log keeps saying that the phone has associated and then immediately disassociated because “WPA retey failed”. The DI-524 is running with the latest firmware update (hardware code B4, firmware version 2.07). It seems to be a Monte protocol issue, since both my Nokia E71 phone and my Dell Vostro notebook can easily connect to my home wireless network using WPA2. Is anybody facing the same problem? Is there any way to solve it? Does Samsung intend to release a firmware update soon?
I've set up my E75 to use Spotify Mobile over wifi to synchronize music without going over the 3G-net costing lots.But it drops the connection constantly and it seems to coincide pretty much with the powersave functionality of the phone.
-Phone firmware is 201.12.01
-The connection is a WPA2-PSK to a Netgear WGR614
-I have tried various channles but the problem remains.
-I have tried changing to WPA-PSK and Unprotected, but to no good.
-Signalstrength of wireless connection reports around 70-80%.
-If there are no active traffic on connection it seems to stay online but when the traffic start the connection drops.
While adding a WPA/WPA2 access point and trying to setting the EAP-TTLS plugin, the setup window suddenly closes without saving the settings. It is impossible to connect a WPA/WPA2 wireless network that uses EAP-TTLS plugin for authentication/cryptation. All other plugins work fine. The current software version is 40.0.005 (40.0.005.C01.01) - 29-12-2009. It is worth noticing that with the previous sw version (I don't remember the number, maybe something like 31...), all worked well. Once I updated the sw, my WPA access point ceased to work, and I found out the problem.
View 13 Replies View RelatedDoes Nokia 5800 Xpressmusic browsing have an issue with WPA2 encryption and MAC filtering? I noticed that my unit browses a lot slower in my N-router with WPA-Personal encryption and MAC filtering as compared to my Wireless G router with WEP security and NO MAC filtering.
View 12 Replies View RelatedMy E66 will be sold to a friend soon. I would like to know if there is a switch or some sequence of buttons that will restore the phone to a out-of-box condition, which no personal or past data inside ?
View 2 Replies View RelatedMost of the time, I use WiFi at home. On a recent trip, I used network voice to connect fine.
When I wanted to test Google Maps to see how it would work, it just kept saying "searching for network" (but never finding it and connecting)
my htc one m8 all of sudden cant connect to my homes wifi, my laptop and other phones in the house are connect but everytime i put "forget network" and then re-type the correct password multiple times it "authentication problem"
View 2 Replies View RelatedMy phone won't connect to any wiwfi, tried everything. My data is through the roof this month. I have had nothing but problems with this phone.
View 4 Replies View RelatedSo my Nokia Lumia 1020 was upgraded to 8.1 via Preview for Developers a few months ago and Wi-Fi/Cellular data was fine. I updated to Lumia Denim at one time and for some reason, Wi-Fi did not work. I tried using the Windows Phone Recovery Tool 2.1.1 and Wi-Fi still did not work. Then I downgraded from Denim to Cyan, and Wi-Fi still didn't work. I tried the Windows Phone Recovery Tool (same version) again, and Wi-Fi did not work.
In addition, I tried adding my Wi-Fi as a hidden network. Still didn't work. By the way, my Wi-Fi is WPA2-PSK, and I have AES encryption.
So here are some specs of my Lumia 1020:
OS version: 8.10.14226.359
Firmware revision number: 3051.50009.1451.1001
Model: NOKIA 909
Carrier: AT&T
Software: Windows Phone 8.1 Update
im gettimg trouble with my phone its have an error constantly .....it says re - enter the
password to connect the wifi constantly.
My Nexus 6P arrived yesterday and now i have problem i can't connect to my WiFi.first time i try connect WiFi working good and then after hour when i try to connect again on same WiFi can't connect and stuck on Obtaining IP Address and when do restart for router the device connect to WiFi and when turn off WiFi and try connect again same problem.
View 5 Replies View RelatedWhen i'm getting home even if my phone is set to be connected by the internet i mean Mobile data is ON and the wifi is OFF is there any way to make that when i'm getting home it will detect any wifi will turn off the mobile data and will connect automatioc to the most strong wifi at home ?
Another question sometimes when i'm in my living room and connected to the wifi there when i'm getting to my pc room it's cont connecting all the time automatic to the wifi at my pc room it keep be connected to the living room wifi and the speed and the strenght of connect is not strong.
Sometimes it does change the wifi when going from lvinig room to pc room and sometimes not.
This is important since sometimes i forget to change the connection and it keep be on Mobile data when I'm home and not wifi. This is what i need:
It will search every X seconds/minutes for the strongest wifi at home and will connect to it automatic and will turn off the mobile data if it was on.
The phone can't find the network in cuba
View 12 Replies View RelatedMy wifi connection works great with my home router and at my public library (where I don't need authentication) but anywhere else where I need to logon to wifi (three establishments now) , I can't connect. My password seems to get taken and from the wifi screen it looks to be connected initially but then keeps trying to connect but never actually does.
View 1 Replies View Related