I have a blackberry torch and it works fine except for the caller ID. I eventually find out who called me but when they do call it comes up as Unknown, even though they are in my contacts.
I live in amarillo texas, but last weekend I went to Colorado and nothing! I can make calls and hear people, but they can't hear me. This is the second time it's happened and AT&T has no clue what's up.
My girlfriend has a problem with her blackberry torch. Last night her phone felled out of her bed (20cm.). Well, there wasn't any weird behavior. WASN'T! Because after a few hours her phone displayed "Your battery is low and your phone will turn off", but the indicator in the right corner said it was charged for 60%, After rebooting and a factory reset nothing changed. Sometimes it works for a few minutes, and then it shut down again.
Suddenly, neither my camera nor videocamera work, it seems a problem with the viewfinder. When trying to use the videocamera a message says: "Another application is using the camera. We cannot start the camera's viewfinder". I really don't know what to do.
I just bought my 9850 about 4 months ago. Now my escape and menu buttons don't work. It went from being able to either one down for over 5 seconds to get them to respond to nothing happening at all.
yesterday, after one month of usage, my 9800 display this error message:
phone not allowed - MM6
so, after some battery pull, decided to re-install the original SO. now i can see the name of my carrier and the full power of signal but i'm not able to make/receive phone call or text messages because it says: no service available.
i looked for any number to contact but i didn't find anything.
i've bought this 9800 to replace my iphone but i think i'll keep my iphone: with apple a problem like this will be solved calling the support center and receiving a new phone, with the blackberry.. it's better not to know! (one frriend of mine sent the bb to the support and it come back after 2 month still not working) any number to contact? or any person who wnat to buy my torch?
There seems to be plenty of discussion about the 9900 not working with bluetooth on BMW cars but is anybody else having problems with a Torch 9810?My phone won't connect automatically - or rather it claims to connect on the iDrive screen, but doesn't work/ I have to disconnect and then reconnect again. That is on a good day. Every couple of days, it fails repeatedly and I have to delete the connection in the phone (the car won't let me) and pair again. Sometimes this takes a while. I am running version 7.0.0 Bundle 1465 which appears to be the latest software. My car is a 2005 BMW 6 series and it works fine with my wife's older Blackberry (a Curve I think) and my old Torch 9800.
Recently I dropped my BB into the river while fishing.I dried it out and everything still works except the UP Volume button. Does anyone know of an app that can control the volume using the touch screen or the keyboard?I've searched all over and found nothing.
I have a Blackberry 9800 Torch and my internet doesn't work, it's unlocked and it used to work fine til I change my rate plan but I do have unlimited everything in this new rate plan. My emails account work and everything else works when I'm over wifi
my blackberry torch 9800 ear speaker hasnt worked in a while but it didnt bother me much because i would just put it on speaker and i could hear fine. recently my backlight (what it seems to be) has stoped working and i can barley see what i am doing on my phone. my phone still works fine besides those flaws but i would still really like to get it fixed.
I have a 9860 Torch and after two weeks, my hangup button stop working when I made calls.My ''back'' button too have the same problem when I'm in the menu.I reboot many time my device and the problem still.What I have to do? Return to my store. They told me: ''we have to send it back to Blackberry and wait many weeks to know if they will replace the device or charge you 60$ if they don't find the problem''.
I have a 9800 black berry device that I bought from Saudi Arabia. This device doesn't work any more and without any previous problems with it. So, I want to know from where I can fix my phone and how much that will cost me? By the way, I am a student in Waterloo city, so I assume that it will be much easier to solve my problem soon.
My wifi doesn't work ( i cant surf) with data services off. and if i keep data services on that is if my blackberry services..and surf the webpages ..my balance gets decducted..but i have unlimited blackberry plan. and on the first place my balance shouldnt be deducted because i am using my wifi ( in case my page gets open through wifif not blackberry services) and if i am using my balckberry internet either way my balances shouldnt get decducted.
Just recently (2 wks) the middle select button has quit working on my torch when I have the keyboard extended. I can still scroll around the screen with it, but when I push it to "select" it does nothing. The button works normally when I have the keyboard put away so this seems like a software problem or setting I have wrong
I am a blackberry developer working on a recording software. Just did an OS upgrade on my 9800 when I saw an upgrade alert on BlackBerry Desktop Software.The OS after upgrade is 6.0 bundle 2342 (v6.0.0.526 platform 6.6.0.195)Now when I run my application to do the voice record (WAV format, not AMR ), I keep getting an error "Requested bitrate is not supported", I tried different bitrate (8000,16000, 44100, 48000....), none of them supported.I used to use bitrate=8000 for recording and it worked, but now it throw above exception.I even change encoding bit from 16 to 8bit, channel from 1 to 2, didn't work.
My Torch 9810 touch screen doesn't work properly anymore...it works each time the phone has just been freshly boot or when a battery pull has just been performed and stops afterwards until another battery pull or boot is done. is this some sort of software problem? Can it be fixed? If it can, how? I tried upgrading to OS 7.1 but the same problem persists.
I bought an unlocked BB Torch 9860, for same reason I don't know why, it doesn't work in 1900 Mhz Band, that produce I can't link to the 3G network in my country. Is it possible to solve the problem?
I had the tour first and since upgrading to .732 since the BOLD has the same software and i now have the bold 9650-verizon. When my phone rings the last callers name will come up first then automatically change to current caller.Has this been happening to anyone?
New user to forums and second Windows phone. Got the 950 last week and had to do a hard reset to get it running properly (battery drain, sluggish, etc) Added Windows Insider and it seems to be running the way I would expect a highend phone to run. One thing I have noticed, even before the reset is that when I get an incoming phone call (from my wife for example) it only shows her phone number and not her photo, contact information, ringtone, etc.
when recieving an incoming call my x3 doesn't display the number that's calling me, even if I have the number in my contacts, it just says "call". I've had a look through the settings and options and that to see if i have to turn anything on, but could't find anything.
- On incoming calls only the contact name is displayed, and the name of the specific extension isnt' shown.
I'll be clear: I've contact Oren, with numbers: Home: 111, Mobile 222 and Tomer 333
When Oren calls I see only "Oren 111" or "Oren 222" etc. I want to see "Oren Home 111" or "Oren Tomer 333".
I placed an image of the problem here: [URL] ....
I played a lot with the settings, tried re-improting the numbers from google, tested my contacts on an Asus phone(there it worked) etc - nothing works on mine.
BTW: HTC One. Android: 4.3 (happened on earlier androids too).
My brand new Nokia E72 doesn't show the caller's company name.
So, I do not know who's calling me... it just say: Joe. But I have in my adrees book a Joe from Vodafone, a Joe from P&G and some other Joe's. On my old phone, when someone rang me, showed eg. Joe from Vodafone.
after I updated my Nokia E6 to the recent software, it doesnt show the callers names when receiving a call and when receiving an sms. I have to save the same number twice, once with international prefix example +963 (thats for my home country) and once without. When receiving calls it show the name only if saved without the prefix (unless its an international call) and when receiving sms it shows the name only when its saved with the international prefix. I didnt have that problem before the update!
My current software: Symbian Anna Software version: 022.014 Date: 2011-07-05 custom version: 022.014.00.01 language set: 022.014.35.01 Model E6-00
I have just bought an E66 and am having problems with getting the caller ID function to work.I have stored my contacts with the country code before the number. However, when people call me, it does not show them as a saved contact, it just shows the number.This is frustrating and is a continuation of a long list of problems with my E66. I would say that the E66 is not the best phone I have used from Nokia.Can anyone please offer some suggestions on how to make my saved contacts show up on screen when they are calling me?
I loaded all my accounts and all my contacts are there but when someone calls the caller id doesnt match to my contacts and just shows the number, if I go to save that call to a contact, the number is already there..