BB Torch :: 9810 Touch Screen Doesn't Work Properly Anymore?
Dec 26, 2011
My Torch 9810 touch screen doesn't work properly anymore...it works each time the phone has just been freshly boot or when a battery pull has just been performed and stops afterwards until another battery pull or boot is done. is this some sort of software problem? Can it be fixed? If it can, how? I tried upgrading to OS 7.1 but the same problem persists.
From 2 weeks i found that my touch screen doesn't work properly from the top left part. All the touch among the whole sceen works good except this part it work when i restart my phone and then doesn't work.My phone is Z5
was working perfectly fine until i downloaded an app that you can now get for free from RIM until some date in may. anyways, i wiped my phone and it was working fine for a few days, then it stopped working out of no where. then for some reason when i upgraded bbm and had to reset my phone, the touch worked perfectly but then randomly stopped working again. It basically does not work at all, except for sometimes when my phone is plugged in. idk how to fix this, would re-installing the software get it to work again or should i just take my phone in?
my 9810 doesnt boot up completely and doesnt connect to my desktopmanager either...it opens up a screen where i see 'blackberry Platform 5.0.0.469'.....and i am using a blackberry 9810 with an os7..
after i updated my C3-01 software my touch pad doesn't work properly. It hangs very often like when i send text messages, when i go through the contacts fastly and more often when i connect to internet in all applications like nokia social messaging, mail, chat, opera mini, etc.
My 9810 is acting up. None of the keys are working, even the 5 below the screen. Sometimes the track pad works but not when it is pressed, and when the back botton works it puts me into sreach mode and looks for the letter "H" only. The touch screen is fine. This was before upgrading to OS7.1. I have done multiple hard resets and it does nothing at all. This has been going on for three days now. It hasn't be dropped or anything.
Last night I upgraded to OS 7.1 now my back ground does not rotate properly with how the phone is being held it does rotate, When you hold it upright it thinks its on it's side and vise versa.
There seems to be plenty of discussion about the 9900 not working with bluetooth on BMW cars but is anybody else having problems with a Torch 9810?My phone won't connect automatically - or rather it claims to connect on the iDrive screen, but doesn't work/ I have to disconnect and then reconnect again. That is on a good day. Every couple of days, it fails repeatedly and I have to delete the connection in the phone (the car won't let me) and pair again. Sometimes this takes a while. I am running version 7.0.0 Bundle 1465 which appears to be the latest software. My car is a 2005 BMW 6 series and it works fine with my wife's older Blackberry (a Curve I think) and my old Torch 9800.
I have recently got a symbol in the top left hand side of my screen. Since i got it i have lost the ability to text using the touch screen , also i have lost the smiley face applicaion.
The main screen sometimes flickers too. The symbol is like a wedge with a rectangle shape sat on top with a red circle beside it.
Phone fell into snow last week (when I did). Got the red dot indicating liquid damage. All seems to be working except the touch screen. I can no longer do anything with it.
It keeps telling me that the c: memory is full and that i should delete some items, however when i try to, there is hardly anything on the c:. Also the phone only works sporadically for about five minutes after switching on and after that the menu button and the touch screen do not work properly and i am unable to make any calls or texts, but can still recieve calls.
Also it is telling me that the sim memory is full and remains full despite deleting text messages. Has anyone else experienced such problems or know how i can fix these problems?
Recently the touch screen keyboard if my blackberry torch has stopped working when I close the my phone (slide close) and also the rotation that Blackberry torch does when you change the position of it isn't also work, I thought it was software problem but it's not.
I have updated my device (Torch 9810) a few months ago and from that moment on the touch screen is not operating properly. Sometimes it works but most of the times it does not. Also the track pad does not always work properly after the upgrade. Yesterday nothing worked and I had to soft reset the device before considering throwing it to the swimming poolThe unfortunate thing is that I do not remember what type of upgrade I made but it took 2-3 hours to complete.Last but not least after this upgrade my battery dies in less than half a day. I bought a new one and the same thing happens.
I have a 9800 black berry device that I bought from Saudi Arabia. This device doesn't work any more and without any previous problems with it. So, I want to know from where I can fix my phone and how much that will cost me? By the way, I am a student in Waterloo city, so I assume that it will be much easier to solve my problem soon.
I am a blackberry developer working on a recording software. Just did an OS upgrade on my 9800 when I saw an upgrade alert on BlackBerry Desktop Software.The OS after upgrade is 6.0 bundle 2342 (v6.0.0.526 platform 6.6.0.195)Now when I run my application to do the voice record (WAV format, not AMR ), I keep getting an error "Requested bitrate is not supported", I tried different bitrate (8000,16000, 44100, 48000....), none of them supported.I used to use bitrate=8000 for recording and it worked, but now it throw above exception.I even change encoding bit from 16 to 8bit, channel from 1 to 2, didn't work.
My momīs Blackberry Torch 9800 (Carrier is Claro Brasil and the OS is updated to 6.0 Bundle 2647) isnīt working properly. Sometimes the touch screen doesnīt work and sometimes is works but not in a perfect way. When I try to type some numbers to dial using the virtual keyboard some keys doesnīt work out like the back button. When I type the back button the number 3 appears in the screen. I tried to downgrade and then upgrade the software using the desktop manager but this didnīt fix the problem and even after pulling the battery several times the problem remains.
I just got my Lumia 950 Dual Sim (2 days back) and so far I loved the features and appearance. However, I am getting frustrated with the continuous reboots and on-screen keyboard issues.
When I am trying to type in whats app or Skype (I havent tested other apps yet), the keyboard hangs and then it goes down. I have to keep clicking on the message space and then after a while either it comes up works for sometime and goes down again (unresponsive) or the phone gets restarted. I need to say that I am a bit frustrated with this as this is happening with a frequency of less than 2 minutes. I tried the basic troubleshooting steps of soft reset (volume down + power), but still same.
1) the screen doesn't lock anymore; i mean the slide to unlock thing doesn't appear : when i lock the phone the screen just goes black but when it's in my pocket it unlocks itself and start messing around like calling by itself!
2)the central button now only lights the screen; it doesn't go back to the main screen anymore! i have to use the button <-- (back) as many times as i entered in a folder to go back to the main screen..
3)the phone doesn't ring anymore! i can listen to music or whatever but it will just vibrate when someone calls me! also when I try to change the sound level with the side buttons, even if i go max, it will say :Ringer Volume silent ringtone selected
4)the camera crashes as soon as i open it, it's just black as if something was blokcing the camera.. the only option reamaing is to turn off the phone and then reboot!
5)by the way when I press the shut off button usually you have 3 choices : *plane mode *power off *xxxx (i just can't rember what it was)well now i only have one option: power off!
6)Oh btw it has already happened to me a few days ago; after much searching in the internet with no answers i simply did the 'factory data reset' thing and it worked!
Yesterday me Touchscreen stop working. I tried to restart it for 3 or 4 times, but itīs still not working. So I tried to download the software again but itīs still the same. Only the Keys on the sides are working, but not the touchscreen.
Hi I have had the Bold for about 3 months and about 1 month ago the touchscreen stopped working, i looked online and saw the battery reset option (taking out the battery) it worked at first but then it happened again and again ect. So i then saw the alt+aA+del option this worked too temporarily so now i will take out the battery it will work for about five minutes and then you will not be able to use the touchscreen (everything else is fine)?
I bought my nokia x3 02 about 3 days ago and last nihgt the touch screen becaem unresponsive, my phone went dead and then when i turned it back on the touch screen wouldnt work so i couldnt press ok to get into my phone when i put in my pin code! i dont know what to do i dont have a spare phone!
The mobile was in my jeans when i was in class. Then i pulled it out afterwards. The touch screen wasn't working. But all the other keys are working fine. I've tried hard reseting my phone, but the thing is i've put on a lock code. So whenever i turn my cell on it asks for lock code which i can't input cause of the touch screen being down. Now i really wanna get my precious data out of the mass memory. The phone memo doesn't matter since i got backup.
My phone has already been cracked for a while but today another piece of glass came out and a black mark appeared on the screen and the touch screen stopped working.