i have an sonyerricson X10 . and my phone is fails to power up with a SD card. when ever i take the SD card out the power is on, as long as i keep the SD card there the power is off cant be be.
View 2 Replies
In the storage section of settings on my Xperia Z2 there is a "transfer Data to sd card" option. it use to work just fine. Once the internal storage was awfully full and came a notification that said "75% full, transfer data to sd card" tried it like always but this time it fails to start. When I try to run it from inside the settings, also fails to start.
View 2 Replies View RelatedI just got my 9700 less than a week ago, then I woke up this morning to make a phone call. After the call, my phone just turned off, and since then, it's been trying to power on. The BlackBerry screen will show, along with the loading bar, but it'll only load about 1/4 of the way, then the screen flashes white, then turns off, and does the whole thing over again. It's been going on for about 45 mins now.
I've also done the battery/sim pull.
my iphone 4s has just switched itself off and now has no power at all or at least fails to start up again! Prior to shutting down there was grey and black vertical lines running down the screen and as i swiped to unlock, it just shutdown. I have tried plugging in the charger (although it was at 60% battery) too see if i could switch it on again, but after only a short time the phone was really hot so have now unplugged.
View 2 Replies View RelatedI have a one month old LG G4 that has been working perfectly.
I added a 128Gb class 10 PNY SD card and it mounted perfectly, copied over about 40Gb of data and all was well.
A while later a message popped up on the screen "SD card removed unexpectedly. It can be damaged. Always unmount SD card before removing it."
I am unable to access the SD card via the phone in any manner, if I remove the card and put it in a USB micro-SD adapter and plug it into my laptop it mounts just fine and I can access all of the data. I have run Windows check disk against the SD card an no issues were found. The phone is still unable to mount/read the card.
I went as far as to remove the partition from the SD card and reinstalled it back in the phone, it was then detected and the phone auto-formatted it, and then I was able to copy my data back onto the device... and about 10 minutes later the same error popped up "SD card unexpectedly..."
I have a second identical SD card, I tried using it and the same exact problem happened.
I have an LG Versa that always fails when atempting to dial a call. It says "Calling" and the number dialed for about 30 seconds then says "Call Failed!!! Try Again". Everything else on the phone works fine.This happened after the phone was partially bricked and then an emergency flash was performed with LGNPST Lab Level 1.2 and the vx9600.dll. The phone has since been completely reflashed on several occassion with versions 3 & 4 software by the carrier techs, some "super techs" & myself "standard tech" but problem persist.
I have noticed if you go into Programming Mode (##77647269600 call then 000000) under Field Test & Screen that the value "TxPower" is always "TXOff" even while call is being attemped, before it fails. (see attachment) No one has been able to determine how to get the TxPower On. LG says that someone must have changed a setting, but they refuse to provide the information on how it is accomplished. Lg insist that it must be sent in for service.The phone is out of warranty.
ive just put a memory card into my 8520 and it saying it needs formatting but yesterday it was working fine so i just put another memory card in and my phone wont read both of them and saying 1 of them has no size on the card but when i try to read my files it saying the card is empty me recover all of my files please ive not done anything to them like formatted or
View 2 Replies View RelatedSince the GB update I have noticed that apps the do not install to the SD card by default fail the first time when you manually tell it to install the SD card. If you immediately try it again it will move successfully..I have already cleared the cache and factory reset to work around other odd app crash/stability issues but this items seems to persist. I have noticed the issue with/without SD card encryption enabled.
View 3 Replies View RelatedI cant access any website on my rooted 4.4.4 nexus .. I keep getting this message (The WAPGW fails to query user information(PLAT return fails))
Even on the play store i get server error .. On fb i get internal server error.. All Apps cant connect to the internet
Only way i can go online is using opera mini or
If i switch on reduce data usage on chrome weirdly it works .. When i switch it off i get the same error
Resetted data on google servicces and services framework with no luck
Attached Thumbnails....
any suggestions what to do gratefully received have done the ususal, turn everything of and on, remove battery, all are charged ok but computer doesnt seem to recognise bb any more and cant connect
View 7 Replies View RelatedUsing a microUSB SD card reader? Does the phone micro-USB have enough power to read a camera's SD card?
View 13 Replies View RelatedMy XPERIA ray fails to update to ICS. I'm trying it since a week but it always fails in the following screen.
View 2 Replies View RelatedWhen i updated my on x10 to 2.1 everything went as it should but when i updated my girlfriend x10 white i failed at updating.
View 6 Replies View RelatedMy phone came with a little tool as thin as a safety pin and there is a small hole in this slot. .
View 2 Replies View RelatedI have bought an xperia play.. I like it a lot. The only problem is, my phone does not seem to want to let me connect to it using usb. I can plug it in and win7 recognises it (mtp mode) and I get it coming up as 'Xperia Play' in 'Devices and Printers', however Sony Ericcson PC Companion simply times out when trying to connect to the phone. Also, no notification comes up on the phone regarding USB like I have read in some of the other forum Q&A's.
A friend of mine got rid of a lot of the 'bloat' on the phone with Titanium Backup (I think it's what he used?!).. I am wondering if the 'agent' or 'service' or whatever you call it on the phone is no longer running.. Hence there is no notification on the phone when plugging it in to a PC via usb.
I am going to send it back to where I got it anyway as I have a major issue.. Calls go straight to voicemail regardless of the sim I use. I was trying to update my phone to the latest firmware to see if this problem is solved... But I can't do it. I think sending it back might be the better move. Just thought I'd mention that too in case someone knows of a reason this could be happening (no, call forwarding is not enabled).
While running the 2.1 update on my phone the upgrade stopped. Now i can't start the phone, a warning icon shows on the display for a couple of seconds and then the phone turns off again.
View 9 Replies View RelatedI am having some major battery draining issues since patching to Android 2.1, which I have noticed many other users were experiencing too. I found, in another thread, that using the repair tool may solve the problem (it had worked for other users), so I figured I would try it. Unfortunately, the repair tool goes through a preparation process, and then fails. It says "the update of software has failed. Please consult a technician". And yes, I have mounted my phone properly before running the process - I am not technologically challenged.
What I would like to know is how can I correct this problem, if any others had experienced the same issue, and how they worked around it. I would prefer NOT to read all the the responses from people that have nothing better to do with their time than write hate-mail about this phone, and how you are going to go demand a refund.I just want to fix it so that my battery works for a couple/few days again, and I can run the repair tool to get my phone back to normal.
Call Log Fails after upgrade to 2.1.A.0.435.This is major issue and there is no feedback from Sony Ericsson.
[code]....
I've connected my Xperia Ray to PC Companion 2.0 and I've been informed that sw version 4.0.2.A.0.62 was available for my phone. I started the procedure but I got "Your IP address is not allowed to update/repair brown phone. Please connect to SEMC network to update your phone". Then I've downloaded the SEUS software and tried to upgrade that way, but Xperia Ray is not listed in the phones' catalogue. What shall I do? What is SEMC network?
View 1 Replies View RelatedToday i tried to update my xperia mini and sony PC companion started the update process. but the second tab, prepare system for updation fails to complete. it just stops abruptly without any message or notifications.
View 7 Replies View RelatedI have just updated my X10 mini pro to 4.1.B.0.587.Now the phone won't start. When I press the on button the phone vibrates, the LED on the top left flashes faintly green twice, and then nothing.I can connect to PC companion, and it recognises the phone. I have even been able to do an update to the phone via the PC companion.
View 2 Replies View RelatedOkay so i have had my z2 for just over a month now all was well but it now drops signal regularly at home and at work. Girlfriend has a htc m8 on same network and hers does not have issues also when it does drop it fails to reconect i have cleaned the sim done a factory reset.
View 9 Replies View RelatedI am trying to upgrade the OS of my xperia RAY through PC companion. But every time if fails. I am using this phone for a month and while doing it, I have tried it by Factory Data Reset. But no positive result. I am having no proxy or so.
View 1 Replies View RelatedWhen i try to pair my Desktop and my Xperia Active vía Bluetooth, i always get two different pairing codes (i'm using the assistant from windows 7 64bits) on the screen of my Active it shows a code, and my PC shows another completly different, no matter how many times i tried, is always the same, and is imposible for me to connect my smartphone to my PC.
View 9 Replies View RelatedI have an Xperia X10 since July on Vodafone UK. It is (was) running the latest SE firmware, but is now 'bricked' - I learned this term while googl-ing for the problem, but all the mentions involve 'debranding' or installation of unofficial (unauthorised) firmware releases - and I haven't done ANY of that.
The story in detail:
1. In recent days I noticed some glitches in the performance of Android Market on the phone: some downloads were reported as 'unsuccessful' and had to be repeated. This happened both with new apps and with updates. On occasions a reboot was necessary for downloads to start happening normaly again.
2. Today (Sat 30-10) this went to extreme: NO download from the Market was possible at all, each time it stalled forever. As explanation, an error message started coming up: "The process com.google.process.gapps has stopped and needs to be force-closed". No rebooting would solve this. I cleaned several caches (after reading various forums about the error)
3. I decided to reinstall the firmware, hoping to fix the Market performance. Backed up all my data and connected to PC Companion. In the first phase it reported that I "already have the latest version", but I wasn't after an update, so I went on to Repair / Reinstall.
4. The download went smoothly and the installation started well, proceeding to near-the-end. THEN, PC Companion reported: "The installation was unsuccessful, try again". I tried - several times, and the result was the same. Decided to return to my existing installation and seek other ways to repair that 'com.google.,..' process.
5. On attempting to boot, I saw that dreaded YELLOW TRIANGLE with no explanation, and a dead phone not responding to any controls. Had to turn it off by removing thebattery..
6. Several re-installation attempts with both Companion and SEUS also failed, and I am stuck with a useless brick
you ever captured an amzaing unique or funny picture or video at the best almost impossible time creating a priceless memory? .........and then for the media to not be there? well welcome to my world. my xperia x10 mini pro.....literally decides when it wants to capture the image or video. for example, sometimes i will take a photo.........the image is saved. i then go to view the image and i just get a black screen with some sort of white logo on it. which i assume means error. i cannot even find a discussion info or image on this extremely frustrating topic.
as for videos......i had recorded probably a once in a life time extremely funny occurance with my friends...........you cannot fathom the amount of anger i felt when i opened the video to discover it freezes at PRECISELY the funny moment and then stops. another video simply told me..
Whenever i try to read a msg having web or email addresses,phone freezes and only way is to select remove memory card option by pressing power key.no other key works.i tried both resets and mem card format.nothing worked.
View 4 Replies View RelatedI'm trying to update my xperia x8 to android 2.1 according to instructions from PC Companion. But the update already fails during preparation of pc phase - all I get is an error message that some files oculd not be read and it stops and suggests to try again. But no luck there.
View 1 Replies View RelatedEvery time I get a call in my car, I answer it with my bluetooth. But when I do that the screen lock is going in unlock mode. I don't want it to go in unlockmode because my phone is in my trousers.Can I change this in the settings?? If I take a call with a bluetoothdevice the screen-lock must stay on.
View 2 Replies View RelatedThe playlists created on my sk17i are not showing up in media go, so there is no chance of syncing this playlists.
I created .m3u playlist on computer and transferred it to the mobile. Songs in the playlist is working fine but if add or remove any songs to this playlist... the changes will be gone when the music player is restarted..
Whenever I attempt to download a file through the stock web browser (i.e. an .iso file, .nzb file) which is not compatible with the bundled office suite, I often find that my download either fails or is somehow corrupted. The problem is solved by installing a third party bloatware browser (i.e. firefox) to download files with.
View 1 Replies View Related
