I have my Neo V display not working where as phone works. Touch screen works, I receive calls, charging works, able to switch-off / switch-on, etc. Service Center person says liquid log near the display connector. Not sure where this water has come from into the phone and using very delicately as I am yet to complete EMI :-(
How much display costs for Neo V?
The face of my phone started going crazy every time I pushed the slider up. When support tried to trouble shoot we backed it up, re-installed the OS and now the entire face of the phone is black and unresponsive!
View 1 Replies View RelatedI have the Sony xperia z3 (d6603) and whenever I look on antutu or any other benchmark app it always says I have 2748mb of ram instead of the 3gigs sony claims
View 9 Replies View RelatedSo just got my 6p yesterday but it seems as though ambient display although turned on is not working ND when I answer a phone call my screen stays black during the call and won't wake up.
So apparently it's because the tempered glass screen protector is covering the proximity sensor. I still have to actually test that theory out once I get a new protector but from doing some digging that most def it. Just a heads up I used the one by super shieldz so don't buy that one until they make a cut out for the sensor.
I have the problem that the wifi works on my Xperia z2 only very limited. If my smartphone is connected to the wifi, everything is either very fast and good, or it loads only very slowly and almost did not go. It also disturbs other devices (PC, Playstation, etc.), which are then work very slowly. When i turn of my wifi from the smartphone, all other devices functioning again as always, and everything loads very fast again. I have that problem since one week.
View 5 Replies View RelatedI have had my Sony Xperia Z3 for a month. I've never dropped it. About an hour ago, the screen went black while I was checking something on the phone. At first I thought the battery ran out, but turns out I have plenty of battery and the phone is on charger now. Then I realised that phone works just fine, it rings when someone calls me, when there are some notifications you can hear a sound too. I can even set volume. Just the screen is black all the time.
View 10 Replies View Relatedi am unable to send sms from my xperia x10 mini pro using my sim alone but i am able to send sms if my sim is placed in any other phones. please help me out to sort out this issue. There is no way to change sms settings in my phone since i updated it to android 2.1
View 9 Replies View RelatedSony Xperia Z3 D6616: LCD broke and I replaced the LCD. When I turn power on it gives me vibrate but can't see any lights on display. After few second, a lady voice start talking like "Siri." when I tap on black screen, it says what I tapped on. Very weired problem.
View 1 Replies View RelatedSometimes there is black screen on my Nexus but I know that phone is working. After some time or after clicking on/off switch couple of times display appear. Sometimes it takes several minutes to put the display on.
View 1 Replies View RelatedMy Iphone 4 dropped in water, phone is working but with no display, what to do?
Info:
iPhone 4, iOS 5
Recently my Nexus 5 stopped working. I get no display, But I can assume the phone is on because when I connect it, the holder on my computer opens up.
I assume there is something wrong with the connection. sometimes i can play with the daughterboard and the backlight lights up. but there is still no display.
The problem is that the phone is in PTP instead of MPT.
I don't care about the phone much as the pictures on it, because they are the last picture I have of a family member that recently passed away in an accident.
Even though the phone is rooted. when I load up Nexus toolkit, the phone is listed as unauthorized and I don't know how to pull any files off of it.
Just an hour ago I started typing and not everything what I wrote came in the phone. I thought maybe with a battery pull it will be over. But now there is no button that works. When i restart my blackberry, I see that it's verifying the software and it's clear. The home-screen is on and i cant do anything. Its the new OS 6.0.0.344.
View 3 Replies View RelatedThe display for my C902 phone has stopped working or to be more specific, the display works sometimes but is blank for most of the time. I have the latest software and have removed battery, memory card and SIM cards and none of this works. I have seen on the net that this has happened to other people too but I have not come across a solution.
View 6 Replies View RelatedYesterday, I dropped my nexus 5 and now my screen won't display anything any more. But the backlight works and so does phone (i know the phone still works because my alarms still are going of) What do you (people on the forum) think is wrong with my phone. Do i need a whole new display and touchscreen or is there just a wire that needs to be reconected?
View 2 Replies View RelatedWhy the display doesn't turn?its set up for automatic turn but doesn't work. Also life log did count the steps only First day since than (nearly 2wka doesn't recognize when I am moving or how far I go)...
View 9 Replies View Relatedon the first day i tested the camera, which worked just fine.But 3 or 4 days later, the camera suddenly stopped working. When i open any camera app, and i really mean any, the display shows me a blurry, wrong colored image, and when i press the button to take the picture, the shutter sound sounds, the display turns black, the app freezes and the picture is not saved.I have repaired the update several times, through PC Companion and Service Update.
View 4 Replies View RelatedThe display of my BB Storm 9550 turn off, but the touchscreen works fine. Just turn off while i using it and never turn on again.
View 1 Replies View RelatedFor one weekn now the display won`t turn off while recieveing or giving calls on my sgs2. I know the proximity sensor is responsible for this, but it seems to work properly, as i tested it in LCD test mode (dialing *#0*#). I`ve tried restarting it or looking for any possible setting, but nothing works.
View 2 Replies View RelatedI have problem with my display is black,working properly but blind,I don't see nothing...
View 9 Replies View RelatedI hardly took it in water for not more than 5 sec , the display has turned complete black n cant see anything, why do U sony have to claim its waterproof when it isn't actually...
View 1 Replies View RelatedI'm Sony user since 4 years ago as I started with Sony Xperia miny pro, Xperia S, Xperia Z1, then Xperia Z2.
Now I own the black model of the xperia Z2 since 2 days I decided to try the waterproof ability and take a photo under the water. I took the phone with me under the water it's not more than 30 meter and not more than 6 min .a few hours later, I found out that some of the water got in because I can see some condensation on the camera lenses both front and back.
Another few hours later I found out that the screen starts to flicker then the screen dies. All other functionality such as the sound still works because I can hear the tone if someone call me or receive a sms but the display and touch is dead.
My z3 is abt 6 months old. Recently I locked my phone and tried unlocking it but the screen never turned on though I can see the screen lighting up a bluish colour but the display doesn't appear. I have to switch off the phone for around half an hour and restart for it to work.
View 5 Replies View RelatedWhen i unlock the phone with fingerprint the display suddenly when too bright and the colour fade away for a second and it turn back normal after few second.
View 8 Replies View RelatedI hd submitted my z3 to an authorized service center under warranty a week before for sum minor issues. Bt while collecting I hd noticed that my display was cracked n scratches all arnd, I askd those ppl bt they were nt ready to accept instead blamed me that im lying n all, finally I convinced them as they didnt mentioned any cracks in display in there job sheet, also they fixed all minor issues under warranty which proves my mob display wasnt cracked while submitting...atlast they agreed to repair the display on there cost.
View 3 Replies View RelatedI've had my Xperia Z3 from T-Mobile for the last 8-9 months, no issues till, well, today when I decided to test if the phone was really waterproof (1.5m for 30min as per the specs). Verified all slots were tightly closed and used for about 15 minutes taking some pictures and video underwater (approx 50cm deep), no problem at all. After those 15 minutes however the screen stopped responding to inputs. It was still displaying content though (camera), just not responding to inputs.
I was able to reboot the phone by pressing power + volume up for a few seconds. The phone seems to be rebooting fine but the screen is not displaying anything now. I can see the screen is backlit, and if I press the volume up or down buttons I hear the usual beeps, but the screen is not displaying anything at all.
My biggest issue now, besides what seems to be water damage on my display, is that I need to recover my phone data (images and some docs) as soon as possible. I tried connecting it to my PC via USB to access the internal storage and get what I needed, but my phone has a swipe code and since the screen is not displaying anything I can't unlock it for my PC to see it.
I tried to take several videos last night of a band but each time I went to save clips of 4 mins in length to my internal storage, the phone would display flashing bars as though saving but wouldn't save (just showed the flashing bars as though trying to save) and instead lock up. I had to restart each time and consequently lost my videos. I tried various recording modes and had the same issues. I was able to take and save pictures with no issues.
View 2 Replies View RelatedThe last time the display functioned I was starting a play-list for my shower. I adjusted the volume once or twice without lighting the screen, and after drying off stopped the music by removing the speaker jack again without lighting the screen. The device then went into my shirt pocket and I ate dinner then watched a movie but when I tried to do a little surfing before bed the screen wouldn't light up. I had seen it light up the buttons but take a few seconds for the display when the CPU was busy so I waited, nothing happened. I pulled the battery and tried again, nothing on the screen. But then I discovered that the touch sensor was still functioning, I could swipe to unlock and power down in the standard fashion just blind. I have examined the water stickers they are both white with bright red X's.
While writing this question (I am sure many of you already know this fact) I discovered that the display of my device is in fact three distinct functional parts. The capacitive touch screen still in operation on my device, the LCD image generator also still in operation, and the Led illumination source which for lack of a more accurate description is burned out.So my question is how could this occur, is it software or hardware, and what are my recourses?
yesterday out of the blue the display on my active stopped working. i connected it to the pc and did a reset/reinstalled the firmware but still no display.i can play music using the original headphones and the headset controls and the home/menu/back buttons light up when i press the unlock key but that's about it.oh yes and i think i managed to unlock the screen even though it was totally back as i could could play/pause music and skip tracks using the screen controls (pressing where i guessed the music controls were).
View 2 Replies View RelatedAfter lollipop update i m experiencing yellowish display on the bottom of d display..
View 4 Replies View RelatedWhen trying to access web pages on Safari I get the message "Safari cannot open this page because it is not connected to the interent" This only happens when I try to use my 3G, WiFi works fine. This stops me from using Facebook, Twitter and other internet based apps when Im out the house Any ideas how to fix this? Im using a 16GB iPhone 4 running iOS 5.0.1
Info:
iPhone 4, iOS 5.0.1
I just recently bought a CA-100 usb charger for my Nokia N95 from ebay. When I use this usb charger on my pc it works perfectly fine, but when I use it on my laptop it doesn't work. When I use it on my laptop it says "charging" for about 2-3 seconds, and then I get the message "not charging". Now I tried looking this up and found out that Nokia chargers usually have a current of 800 mA meanwhile usb's are usually 500 mA. Is there a way to raise the usb current to 800 mA? Also why is it working on my pc and not my laptop. My laptop is newer than my pc and it definitely isn't a hardware problem or anything wrong with my laptop. Possibly there's a setting I must change? It worked on my friends toshiba laptop as well. My pc and laptop are both Compaq.
View 6 Replies View Related