My Blackberry Curve had an auto power on/off feature. I could set it to turn off at midnight and then on again at 7:00, saving my battery. is there software I can download to my Samsung Code to enable this feature since I'm unable to find it already on the phone?
View 1 Replies
I've lost the 4 digit user selected security lock code which is required to reset the phone.Virgin says Samsung should help recover the code and Samsung says Virgin should help recover the code.A while back, I found a code on the web that allowed me to go into a service menu which listed among other things the lock code. I can't find any information on how to get back into that menu.
By the way, yes, I tried the last 4 digits of the phone number, 0000, 9999, 1234.If anyone knows how to get into the service menu on this phone
The only codes I've found so far are:##786# which gets into an info menu but doesn't have the lock code.##33284# which requires a 6-digit security code which I don't know.
i've been searching all over the internet for the userlock code for the Samsung Freeform III, it's not the one it usually is for MetroPCS. i would like to get into the settings and be able to download mp3's and images via the web browser, and even possibly tether via USB or Bluetooth. If anyone knows this code, or can help me figure out what it is. That would be great.
View 12 Replies View RelatedI use auto power on/off on my BB Tour 9630. When it powers on it does not enable bluetooth automatically. I then have to manually enable bluetooth with Manage Connections. Sometimes it works and sometimes it doesn't. Then I launch options scroll to Bluetooth and then enable Bluetooth there. Again sometimes it works and sometimes it doesn't. Sometimes I have to repeat, repeat this step or power off manually then power on. Thinking I should leave it powered on 24/7 and just leave bluetooth on 24/7.
View 1 Replies View RelatedI have previously paired my Tour 9630 with my Widows 7 laptop. At one point, Windows 7 prompted me to enter a pairing code or let it generate one for me. I foolishly let it generate on and got an archane 8-digit code which I entered on my BB and connected.I was fixing the driver issue and was instructed to remove my laptop from the list of devices on my BB. When I tried reconnecting, it asks me for a pairing code. The code it generated previously didn't work. I've even tried 0000 and other possiblities. I did finally get it connected by deleting on the PC and reinstalling it and the manual drivers. But this is a lot of work.What I cannot find out how to do is to change the pairing code for my Windows 7 laptop to something I'm likely to remember!
View 1 Replies View RelatedSamsung Focus won't boot past "Samsung" logo after it show the red bettery low sign. And i have charged it for more than 3 hours. And tried for so many times including held back&search while starting, but it still do not work. Just show the Samsung. What i need to do? Its there better way if i want to keep my information in the phone?
View 1 Replies View Relatedi have mkt 6572 samsung galaxy s5 copy wcdma phone.when making a call/answer call and go INTERNET , auto power off. i change battery ,but not solve this problem.
View 1 Replies View RelatedI've had two Atrix phones since March of this year. The first one was replaced for an issue unrelated to the topic of this post. Both of these devices demonstrated the following behavior:
Approximately every 15 to 25 power cycles, when the Motorola logo starts to animate the phone's LED will begin to blink in one of several colors. It stops blinking when the Motorola logo disappears. The blinking color is most often violet-purple. However, on at least three occasions I've seen it blink light blue and on one occasion it was blinking red.
The blinking LED at this stage of system initialization appears to be a color coded reporting mechanism to indicate a particular state of the phone (perhaps a failure code reporting feature). I'm guessing it's similar to the POST beep codes that a personal computer emits shortly after powered on to indicate such things as device failures, driver loading issues, or configuration problems.
I would like to know what these colors mean during this stage of the phone's booting process. That is, when I see the flashing LED during the Motorola logo animation, I want to know which part of the system is failing. There's no information on the web (including within this forum) that I've been able to locate on this and Motorola technical phone support personnel seem oblivious to the fact that this blinking color reporting even exists.
how to learn what these codes mean? As I've mentioned, both of my Atrix phones have demonstrated this behavior, so I presume all Atrix phones are equipped to demonstrate it as well under certain conditions. It's hard to imagine that Motorola engineers would have implemented a feature like this and then provided no information to anyone about what the color codes mean to make the feature useful.
I was able to use Ovi suite fine before I recently reinstalled XP on my system. But now when I connect the N8 I get the "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" error. Have tried uninstalling and re-adding the hardware, but keep getting the same problem. Have tried installing drivers from the download on the Nokia site, version 7.1.34.0, but it refuses to do so, telling me I have more up to date drivers already installed (although the installed ones seem to be 7.1.32.62, which is older, isn't it..?)
View 1 Replies View RelatedI have read how good the Opera mini is but I can't find the download for the Samsung Code on their website. Does anyone know which one Ishould use?
View 1 Replies View RelatedBefore i can transfer all my Photos and videos from iphone to pc but when i updated my itunes to version 10 no autoplay popped up window and my pc doesnt detect the portable device/iphone anymore. But it can still be detected through itunes. Is there any setting i should change or i shouldve not updated my pc itunes?.
Info:
iPhone 4S, iOS 5.1.1
I have a Samsung Code from MetroPCS. I am running Windows Mobile 6.5. I have searched everywhere and can not find my 16 digit security code. I can tell you it is not the following codes.
01F2030F5F678FF9
2FF811282FF9F3F6
FFFFFFFFFFFFFFFF
0000000000000000
Does anyone know another code? Is there a method someone could help me with so I can find it?
I've just updated my Lumia 1020 to Windows 10 preview 10572. Everything seems ok but for one thing - I can't install the twitter app. It's in the store an allows me to start installing, but it either fails after completing installation, or after restoring user data. I then get an error message with the error code 0x8103010F. I have tried soft resetting several times, but it will not install the app in full. Every other app seems fine, it's just the twitter app that has the issue.
View 5 Replies View Relatedknow if the Asha 302 auto keylock feature have the option to ask for a security code to unlock?( I am considering the Asha 302 to replace the C3-00 which does not have this option. My old ( low cost) 1616 has this security feature.)
View 2 Replies View RelatedI was looking at the Samsung Data/Power connector, but I don't recognize it. Is it proprietary? Is there a name for it? It does not look like a mini or micro USB to me.
View 3 Replies View RelatedWe enabled the power-on PIN option on the T401G, and created the PIN using the slide-out keyboard. We used letters and numbers in the PIN. But now when we power on the phone, and we're asked to enter the PIN...the slide-out keyboard is not activated. So we cannot enter the PIN, because we have no way to enter letters. The phone is basically unusable now. Things we're tried:
- remove battery & SIM, install battery, power on/off, install SIM.
- enter the wrong PIN (which is all we can do) many times (> 10)
- NET10's "solution" via e-mail is to hold down the */lock key, which does nothing.
i have a samsung sch-i220 code from metro pcs and i want 2 know if work as a modem 4 a laptop.
View 2 Replies View RelatedI need a code to unlock my samsung T239 from t-mobile.
View 1 Replies View RelatedI was referred to this site by a rogers customer care after iI have called them for an unlock code for my Samsung t456. He said I could get some help here, I am moving to Jamaica and I want to used this phone.
View 1 Replies View RelatedSim yet to be activated but started setup. Had registered my google account and was interupted. When I returned it was asking me to enter a PIN code. and said that emergency calls were available. I hadnt entered a PIN by this stage.
View 3 Replies View RelatedI have noticed but just a few times. I will have my phone keypad locked and in my pocket. I will take it out and unlock it and it says Power Save Mode. Then when another key is pressed it goes away. What is this? Is it an automatic thing or am I pressing something to activate it?
View 2 Replies View RelatedIf you use the setting to have the power button end a phone call, how do you turn the screen back on if it goes black during a phone conversation without ending the call?
View 6 Replies View RelatedAnyone SGS2 owner encounter power button sometimes not working properly? Not able to sleep/wake and long press for turn off/flight mode. Recently, have to take out battery while flight boarding.FYI: This is my 3rd replacement phone. High possibility causing by Android system. Or another hardware issue by Samsung.
View 3 Replies View RelatedI am running SetCPU and chose it to cut clock speed to 800mhz when the battery is at 30%. Can you recommend a clock speed which will help battery but won't make the phone slow.
View 4 Replies View RelatedWhen I switched my phone off last night it was on 67%.When I woke up this morning at 7.00am it was on 17% and told me to connect charger.At 10.30am the battery indicator was showing 29%.At 12noon the indicator was showing 33% at which point it has remained for the rest of the day until now and it is reading 29%.how the phone discharges when it is switched off. Secondly how is it increasing in power?
View 9 Replies View Relatedive been looking at things you can do with the otg cable for galasy s 2 an dam it looks cool. so i got myself a cable 2 acctualy cuz they werent very expensive 1 from amazon an 1 from ebay 2 different cables. it works when i connect a usb flash driver to it totaly fine no problems at all. so i tried my usb mouse/kb, but no luck after a little bit of research i found out that some kb/mouse dont work if they need power so i moved on from that. then i watched some videos an read some threads about using an xbox 360 wired pad but i have the same problem, the lights flash once an then dont come back on an acts like its not powered ive seen others use same pads online an they work fine but not for me.
ps my cables do work usb storage is proff an pad is perfectly fine as i use 2 pads on xbox an work fine.
I have tried device manager to lock my phone and set a new pin number, but it tells me my phone is already locked and I do not require a pin number. I have tried going thru google and once again it never worked. The pin number screen will allow me to go on indefinitely until the pin is entered correctly. I think I have tried every option except calling samsung or tmobile.
View 2 Replies View RelatedRecently I bought A Samsung SGH A886. And I am currently in Contract with FIDO, knowing that this Phone was a ROGERS Phone. I bought it because a friend of mine told me that it's possible to unlock it. I`ve been trying to look for someone that can unlock it. But I've heard that all you need is a Code to Unlock the Phone permanently.
View 4 Replies View RelatedHow do I unlock my Samsung Glyde if I do not know the unlock code?
View 2 Replies View RelatedIm wondering if anybody knows what the new code is since verizon got rid of the 000000 program code. Trying to do something about disabling the camera as it comes on on its own and takes pictures and kills the battery
View 1 Replies View RelatedWould someone please post the code to get into the service menu on the Samsung Freeform SCH R350. Sorry if someone has already posted this elsewhere because I was having trouble finding it.
View 15 Replies View Related
