Samsung :: Lost 4-digit Security Lock Code For Samsung Restore SPH-M570 / SPH-M575?
Jul 19, 2011
I've lost the 4 digit user selected security lock code which is required to reset the phone.Virgin says Samsung should help recover the code and Samsung says Virgin should help recover the code.A while back, I found a code on the web that allowed me to go into a service menu which listed among other things the lock code. I can't find any information on how to get back into that menu.
By the way, yes, I tried the last 4 digits of the phone number, 0000, 9999, 1234.If anyone knows how to get into the service menu on this phone
The only codes I've found so far are:##786# which gets into an info menu but doesn't have the lock code.##33284# which requires a 6-digit security code which I don't know.
I have a Samsung Code from MetroPCS. I am running Windows Mobile 6.5. I have searched everywhere and can not find my 16 digit security code. I can tell you it is not the following codes.
I have a restore from sprint. Looking for the drivers so I can use bitpim. Can anyone help I have looked for a few days and can't seem to find the drivers for this phone.
I upgraded the firmware on my N97 to 2.1 the other day and have had no problems since. This evening, after a reboot (no new software installed), it won't allow me to enter my 5 digit lock code. The keys are unresponsive. I've tried removing the battery etc..., but it's still the same. I want to avoid a hard reset if possible, as there is some info that is not backed up.
I got the unlock code, entered it into my Samsung and it said personalization canceled but when I put in my Fido Sim Card it says sim lock. I tried all types of 0 codes, 0000 00000 000000 00000000 and none of them worked. What should I do?
I recently started playing around with this phone and at some point enabled the phone lock. I have had it for quite some time and at some point imputed a lock code that I do not remember at all. I have tried every code that I think it would have been to no avail. Is there any way to get past this or am I screwed? I mean there has to be a way to reset the phone so I can use it!
i have been looking for the lock code under Menu> 3 > * > lock code:=? i have tried 450667 but it will not work! does anyone have a list of the codes? another thing i have a Sprint Samsung instinct that i just flashed over to metro i fixed the web and now need to fix the mms. if i could get into that menu in my messenger it would show me the settings.
i've been searching all over the internet for the userlock code for the Samsung Freeform III, it's not the one it usually is for MetroPCS. i would like to get into the settings and be able to download mp3's and images via the web browser, and even possibly tether via USB or Bluetooth. If anyone knows this code, or can help me figure out what it is. That would be great.
I have ATT version of the NEON and I would like it to automatically lock and thus require a security code to dial out or look at my text messages, etc. etc.So for example I would like for it to require a security code everytime I unlock the automatic key lock. (the key lock doesn't require a code just have to open it or hit the yes button). You can set the phone to require the security code (default is 0000) when you power up the phone, or when a new Sim Card is put in or immediately.
Immediately would be ok if it stayed on but the immediately option only works once.So short of going through the menus and setting it immediately each time or powering the phone off and then back on Does anyone know a way to do a lock on the Neon? Don't most phones have a lock feature?
Is Satio has the lock code or security code like the nokia have? and i m thinking to buy this set?should i go for it?please do tell me about the lock code?
The phone froze and so it restarted but now whenever I try typing my security lock code in the phone tells me that I have to wait 5 minutes, as I have typed it wrong in 5 times. I wait 5 mins but I keep getting the same message when the security lock code I am typing is 100% the correct one.
Well as the title says, I think someone has my exact PIN number. Not the 4 digit security PIN, the "unique" handheld code for BlackBerry's. I found it odd one day when my bbm friends were saying I was asking them "Who are you?".
And when my friends asked who "I" was, he said Thomas, which is not my name! I checked my own PIN, and the PIN of Thomas, it's the same! I never had this problem before. Could it be that just in a billionth of a chance that RIM had made 2 BlackBerry's with the same PIN? his BlackBerry and turns out it's the same as mine.
Updated my 4s to OS7.01. When prompted, could not log on using my 4-digit code. What's up? How can I get back into my phone? I'm completely "locked out".
Info: iPhone 4S, iOS 7.0.1, Updated OS to v7.01 Can't sign in!
When I lock my SGS II i would expect all the buttons to lock! However the power button function remain active and its far too easy to accidently power off my phone or set it into flight mode.Does anyone know how to disable this "feature" ??
Now that I'm getting to grip a little more with my SGS II then the next stage is to look at security. On my old phone I had a pin code lock for when the phone was turned on. The nearest I've seen to that is the encrypt device option.Has anyone any recommendations as to good practices for security on android phones, especially with the auto sync of some accounts needed for running which makes me want to lock the phone down tight should it get into undesirable hands.
I can send or receive data to only nokia phones. I can search the other mobile through Bluetooth but when I tried to connect (send or receive) which will ask for a verification code like 6 digit numbers like xxx xxx.
Since the update, whenever I try to manually dial a 7-digit phone number, the phone is automatically prefixing a 617 area code to the number its dialing.
As far as I have looked for, there is no available solution: Wanam module requires xposed, which is not yet available for our S6 64 bits architecture, Alliance fwk announces the feature but it is not active,
So I decided to implement the solution based on the tutorial [URL] ....
I can't get the app working on the phone (it crashes). I suspect that zipalign is doing 32 bits alignment whereas the S6 is 64 bits. I found no indications on Android dev site..
I have been looking all over the web for the 16 digit password for cdma workshop for a Verizon Samsung Tablet, but have had no success. I tried the Samsung Default one, but no luck. It says "the phone does not accept the password".
