i had this phone for a while, and I work on a farm so the screen got scratched cuz i didnt take good enouch care of the phone, so i bough a replacement touch screen off of ebay and received it, so i got the phone apart and installed it only to turn my phone back on and find out i cant get any signal watsoever, why i cant get any signal
View 2 Replies
A couple years ago my wife bought a Samsung Instinct M810. I flashed the phone to Verizon so she could use PagePlus. Everything has been working fine but the phone has really been beaten up. About the only thing that still works is the speed dial function.
A few days ago I found another Instinct in mint condition for her. I have been trying to flash it to Verizon with limited luck. I activated the phone with PagePlus and received a phone number ( I was planning on porting her number when I had everything working).The phone connects to Verizon but it can't connect to OTP. If I dial a number I get connected to Verizon with the message "Welcome to Verizon, unfortunately we cannot identify your phone, etc."
The problem is that when I dial *22890 (or any *228xx number)the signal bars vanish and there is an indicator showing no service and the call is dropped. After the call is dropped the signal returns and I can again connect to Verizon. I have tried several PRL's, even the one on my wife's current phone but it doesn't make any difference. I didn't have this much trouble with her other phone so I am at a loss.
I have a Samsung Instinct flashed to Verizon wireless, I was wondering how i could get internet working on it? I see in other forums that people got metropcs internet on this phone so it shouldnt be too hard to put verizon on here right?
View 3 Replies View RelatedSeems sprint's drivers page will not give up the drivers anymore. Can some email me or point out where I could find the USB drivers? I have the mass storage one but I need the other.
View 3 Replies View RelatedI followed the instructions on how to flash my Instinct over to the Cricket network.
http://ucanflash.com/samsung-instinct-S30.html
Now the only issue I am having is registering my ESN to their network in order to use it. I am somewhat confused as to how I am supposed to do so. I called the customer service number provided on their web site and asked the young lady what I needed to do in order to use my phone on their network. She really didn't understand what I was asking, but she did promptly try to sell me a new package with a free phone. I need some clarification on this subject in order to finish the setting up of this phone.
I stopped at the part where you have to change your ESN:
"After changing your SPC code to six zeros "000000" and writing the new Cricket PRL on to the phone, do the ESN change through Cricket (ESN = Electronic Serial Number)". I want my daughter to be able to use this phone since it has given me such good service since I have had it for almost a year. I know they do work on the Cricket network because I have done my research, but I need some input from those of you who have inside information on how the process works with the activation of the phone.
I have a instinct that has a power button that doesn't work. I looked inside the phone and the mini ribbon with the 2 traces was damaged. Is there any way to replace that, or where to get a replacement ribbon?
View 1 Replies View RelatedI bought an Instinct M800 from Ebay and it came with a "user locked password" and the seller doesn't seem to remember what it is. The MEID is clean so I don't believe it to be stolen. My problem is, how do I remove the password? I've tried for hours entering random 4 digit passwords and nothing so far. I ended up buying a data cable for the phone but I can't seem to get the phone to load/connect with Vista, be it a driver issue, or because the phone is locked.
View 7 Replies View RelatedI have been using google and this forum's seach feature to try to get the answer to my question, but I've read different things and ended up confused.First of all, I have unlocked my Spring Samsung and uploaded the 01040 Cricket PRL and it seems to be working because when I dial 611 I get a message from Cricket. Over the air programming doesn't seem to work when dialing *228, and from reading threads I am guessing I will have to do it manually.I am confused as to at what step do I call Cricket Customer service to get some info I need. Plus, from reading another topic someone said I need to get the min#, mdn#, and sid# http://www.howardforums.com/showthre...nstinct-please from Cricket CS, is this correct? Or what info do I need to ask Cricket CS in order to continue to QPST configuration?
View 2 Replies View RelatedI am assisting a good friend of mine with flashing his Instinct to Metro. His Instinct went down and he bought another on ebay. I am trying to save him a few dollars as he has a lot on his plate with his mortgage and all. I owned an Instinct at one time so I am familiar with the "debug menu" etc. I am also pretty tech savvy and am always tweaking my devices...however have never flashed a phone. I understand I may need QTSP...If you have a link for download it would be appreciated. If you have a link to a step by step or could pass on instructions it would be greatly appreciated.
View 2 Replies View Relatedi have been looking for the lock code under Menu> 3 > * > lock code:=? i have tried 450667 but it will not work! does anyone have a list of the codes? another thing i have a Sprint Samsung instinct that i just flashed over to metro i fixed the web and now need to fix the mms. if i could get into that menu in my messenger it would show me the settings.
View 1 Replies View RelatedYesterday I flashed several roms as I was bored. Stock roms and custom roms.Since doing so, I have a really awful signal and quite often no signal at all.Could I have done something to cause this or is it probably just a coincidence?I am with 3 uk.I can't go out seeing if it improves in other areas as I am currently ill. I am currently on KI3 2.3.5 and the problem was and still is on the last 4 or so roms I have flashed.
View 3 Replies View Relatedmy phone is connecting with my wifi well without any problems but sometimes the signal shows only one bar, even when I am sitting with the phone in the next room, I compared it with my brothers HTC desire s when he came down today and his phone was showing full signal!
View 9 Replies View RelatedI have opened my gs2 up to replace the usb port to cure the charging problem and ever since the phone will not pick up any signal?
View 9 Replies View RelatedSomeone reported that GPS does not work in the area when there is no phone signal... I am not able to test it because I live in an area where Verizon coverage is very good. One thing I know for sure is if I turn the phone radio off, it also turn off GPS.
View 1 Replies View RelatedI need an external antenna to boost my signal in my basement, I was messing around i discovered this antenna attachment under a black sticker. I don't know whats the connector for this called, any help?P.S samsung doesn't mention any external connector in the manual
View 1 Replies View RelatedI get a poor signal indoors at home - on Orange and it's always been the case. I spoke to their customer services and was told to switch the phone from auto select for Network Mode to GSM only. My choices are GSM only, WCDMA only or Auto.
True, having done so, the signal strength seems better though not amazing but, ordinarily, I get then just a "G" for data. I found that switching to WCDMA only, data goes to 3G or even H and sometime H+ but I nearly always lose the standard signal.
I dont understand the difference between GSM and WCDMA nor whether the results I see when choosing each are to be expected or not. I'd welcome any information from those of you who know more about these things than I do.
i went to replace the cracked screen on an s2, got all the backing of, and started to get the front screen of, and ended up splitting the LCD.so got a front screen with LCD, digitizer, ear peace, use little wise which Im guessing is something to do with the signal. put it all together, and turned phone on, and had no signal at all.
View 2 Replies View RelatedI wanted to use a new sports app today but it wouldn't work correctly because the phone won't find a GPS signal. The usual icon isn't appearing and phone just remains in searching mode. I'm sure I opted to not notify people of my location through latitude but I've used the Google sat-nav since. When I go to locations services GPS satellites is unticked, I tick it and exit but everytime I go back it is unticked?
View 2 Replies View RelatedAfter the firmware upgrade I seemed to have lost the 3g signal, before I would hardly see the "E" signal, mine was always the "H" or the "3G" but now all I get is the "E" with rare signs of the 3G signal, this has of course made my internet very slow!
View 6 Replies View RelatedRecently, I began to have this problem where the phone is showing full signal but the phone is actually not receiving any signal. So calls will not come in at all.
View 3 Replies View Relatedphone will lose signal. have to restart phone to get signal back. anybody know how to fix
View 5 Replies View RelatedI live in a poor reception area on the Rogers network. I've noticed that when I go into the basement the phone drops a signal pretty quickly. I am okay with this and is expected. My issue is when I get back on to the main floor, the phone does not pick up a signal again for a long time. Sometimes even toggling airplane mode doesn't work. My wife's iPhone does the same thing.
Anybody else having this problem?
What do these Icons represent or mean, and the meaning when they change Colors from White to Blue (Status Icons). There was a GB 2.3.4 User Manual Posted on Moto's site, Unfortunately no information was included about these Items. What does it mean when all three are blue, Including the H+ icon having arrows beneath it at the same time? Is it also Possible to have the Intro Video Posted or embedded to this thread as well please.
View 15 Replies View RelatedAnyone else experience this? I did th sotware upgrade and a few hours later this happened. I tried manually connecting to the network and it wont. T-mobile asked me to send the phone back but there is a major scratch on the screen so they told me my return warranty was void now.So far I have a $400 paper weight. Anyone fix this issue?
View 1 Replies View RelatedI've had this twice now where I couldn't get a GPS signal. This never happened on my Droid 1, but has happened twice in less than 30 days (two different phones - since I replaced the first one when this happened). This has been in 2 completely different locations.
View 11 Replies View RelatedI was wondering if anyone knows what algorithm is used for the signal bars on the Photon 4G. I have found that there seems to be no correlation between the signal strength (in dBm / asu) in Settings -> About phone -> Status and the signal bars that are shown. Often the signal bars will shoot from 1 to 5 or 6 even with really low signal ( ~97 to > 100 dBm) that doesn't fluctuate.
View 3 Replies View RelatedSamsung Focus won't boot past "Samsung" logo after it show the red bettery low sign. And i have charged it for more than 3 hours. And tried for so many times including held back&search while starting, but it still do not work. Just show the Samsung. What i need to do? Its there better way if i want to keep my information in the phone?
View 1 Replies View RelatedI've lost the 4 digit user selected security lock code which is required to reset the phone.Virgin says Samsung should help recover the code and Samsung says Virgin should help recover the code.A while back, I found a code on the web that allowed me to go into a service menu which listed among other things the lock code. I can't find any information on how to get back into that menu.
By the way, yes, I tried the last 4 digits of the phone number, 0000, 9999, 1234.If anyone knows how to get into the service menu on this phone
The only codes I've found so far are:##786# which gets into an info menu but doesn't have the lock code.##33284# which requires a 6-digit security code which I don't know.
I have a display problem with one of my two phone. When you power on the phone the Samsung logo appear and off after that but the phone boot up OK just don't have any on the screen, I can make call or receive OK. I disassemble both phones and swap the main board and find out that nothing wrong with the LCD Screen but the Main board. The phone have BK03 bin and I loaded with CB23 bin and it working good now.
View 1 Replies View Relatedi've been searching all over the internet for the userlock code for the Samsung Freeform III, it's not the one it usually is for MetroPCS. i would like to get into the settings and be able to download mp3's and images via the web browser, and even possibly tether via USB or Bluetooth. If anyone knows this code, or can help me figure out what it is. That would be great.
View 12 Replies View RelatedJust updated via Samsung Apps the camera firmware to a CDE11 or something version. Took 4 minutes to update and flash this firmware. I wonder what exactly it changed in the camera firmware? Hopefully improved things or bug fixes.I will test a few videos and see if the bitrate has changed or not.
View 8 Replies View Related
